Lifestyle B3300 Transfer Bench User Guide
- June 3, 2024
- lifestyle
Table of Contents
B3300 Transfer Bench
User Guide
Transfer Bench
USER MANUAL – TRANSFER BENCH
GENERAL EXPLANATION OF YOUR TRANSFER BENCH
USER GUIDE
**** Prior to use please read all instructions.
We recommend you keep this User Guide in a safe place for future reference.
- Easy snap together assembly, no tools needed!
- Blow molded bench provides comfort and strength
- Lightweight aluminium frame
- Angled legs and suction tips provide additional stability
- Adjustable height
SPECIFICATIONS
NAME | Transfer Bench |
---|---|
WEIGHT | 14 lbs |
SEAT HEIGHT | 18.5” TO 22.5” |
SEAT DIMENSIONS | 18” W X 16” D |
UNIT DIMENSIONS | 21” x 18” |
WEIGHT CAPACITY | 300 lbs |
SET UP
Bench Assembly
- Place the bench with the seat facing down on a level surface. Insert the 2 legs with LARGE suction tips into the end of the frame that has the seat handle slots. Depress the brass button at the top of the leg and push the leg into the frame. Ensure that the brass button “clicks” and locks into position. Following the same procedure, insert the 2 legs with small suction tips at the other end of the bench [A].
- Insert the backrest extensions into the backrest tubes. Depress the brass button on the backrest tube and ensure that the brass button “clicks” and locks into position [B].
- Turn the bench on its side and insert the backrest extensions into the 4 tubing slots under the seat. Depress the brass button on the backrest extensions and ensure that the brass buttons “click” and lock into position from the top tubing slots . NOTE: The backrest can slide on either side of the bench depending on the direction the you will be sitting [C].
- Place the bench upright so that it is resting evenly on all four legs and insert the seat handle into the seat handle slots. Depress both brass buttons on each side of the handle and push down until the brass buttons “click” and lock into position [D].
- To adjust the legs and seat height, depress the brass push button on the legs and slide each leg to a desired height. Be sure all 4 legs are level, stable, and all push buttons fully engaged before using.
NOTE: The 2 legs with LARGE suction tips should be used inside of the shower.
CLEANING
**** Do not use high pressure cleaners, steam cleaners or harsh, caustic
chemicals for cleaning.
› Use a non-abrasive detergent or household cleaner with warm water.
› Rinse with warm water and wipe dry.
› DO NOT USE AN ABRASIVE CLEANER OR CLOTH with this product, as damage may
ensue.
LIFETIME LIMITED LWARRANTY
Your Lifestyle Mobility Aids product is warranted to be free of defects in
materials and workmanship for the lifetime of the original consumer purchaser.
This device was built to exacting standards and carefully inspected prior to
shipment.
This Lifetime Limited Warranty is an expression of our confidence in the
materials and workmanship of our products and our assurance to the consumer of
years of dependable service.
In the event of a defect covered by this warranty, we will, at our option,
repair or replace the device.
This warranty does not cover device failure due to owner misuse or negligence,
or normal wear and tear.
The warranty does not extend to non-durable components, such as rubber
accessories, casters, and grips, which are subject to normal wear and need
periodic replacement.
Should you have any questions regarding your Lifestyle Mobility Aids product
or warranty please call your local dealer or contact us directly.
Some Additional Products:
Premium Shower Chair with Back and Padded Arms| Commando Memory Forearm Crutch| Super Lite 19″ Aluminium Companion Chair
Designed In The USA and Distributed By: LIFESTYLE MOBILITY AIDS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>