Lifestyle ZP-5102 Rechargeable Waterproof Bodygroomer User Manual
- June 9, 2024
- lifestyle
Table of Contents
Lifestyle ZP-5102 Rechargeable Waterproof Bodygroomer
-
Before using this product, please read through this manual carefully and keep it well. lt is only operated by adults,not by children themselves. This is not a toy and for children’s safety, please don’t put it in a place where the children can reach out for this product.
-
Lisez attentivement ce manuel avant d’utiliser la tondeuse. Ce produit ne doit être utilisé que par des adultes, pas par des enfants. Cet appareil n’est pas un jouet. Gardez la tondeuse hors de portée des enfants.
Lees deze handleiding zorgvuldig vooraleer je de trimmer in gebruik neemt. Dit product mag alleen door volwassenen bediend worden, niet door kinderen. Dit apparaat is -
geen speelgoed. Bewaar de trimmer buiten bereik van kinderen.
Introduction
Technical Highlights
- Special head in an R-shaped corner, and no scratches on the skins.
- Being super quiet.
- With 2 guide combs, easy-to-cut hair of 4 lengths.
- As per power and environment, select charging use or plug-in use.
- Global universal voltage,5V/ DC USB port input with short circuit protection.
- 2-color indicator lamp display, it’s red in process of charging and turns green in operation.
- Detachable cutter heads,easy to wipe off scrappy hair.
Technical Specifications
LCD Digital Display
- Built-in rechargeable 600mA Li-Ion battery
- Charging time: 3-4 hours
- Running time: 100-120 mins
- Accessories: USB charging cable, Lubricating oil, Cleaning brush, Charging Base, Adjustable Comb
Accessories
Accessories view
Using method
On/off
- Press the power button to turn the clipper on, the indicator lamp turns green, the blade moves back and forth.
- Press the button a second time, the led light will light up.
- Press the button again, the clipper closes, and the blade will stop moving
Switch on reminders
- Turn on the button, the indicator turns green.
- When the clipper doesn’t work, please turn off the button immediately.
- Meanwhile, please check if there is anything wrong with the head.
Plug-in use/charging use
- Plug USB 2—hole head in clipper body
- After you have checked the clipper has been closed, just put the USB adapter into a power socket and then the body indicator lamp will be on.
- (USB plug can be put into any USB socket on the socket, cell phone charger, desk computer, laptop, and portable power bank)
- Warm Reminder: When you just bought this product, before you use it, please charge it.
With and Without Guide Combs
Guide comb use
- Through the guide comb, different length trimming can be adjusted.
- As per haircut needs,please choose proper guide combs
- Seat charger direct charge dual-use
How to put on or take off the comb
Put-on Method
- Face the comb to cutter head slot, make sure it’s fixed one side and then the other one.
Take-off Method
- Drag open one side of the guide comb in fingers. Don’t draw comb teeth hard, to keep them from being damaged.
NOTES
- Guide comb carry no wrong operations and control hairstyle thickness effectively.
With and Without Cutter Heads
Cutter head features
- Ceramic Blades : durable sharp hygienic stainless
Cutter head installation
- Put part A into slot B
- Make sure it has been aligned,press cutter backs, then hear click sound. That’ s okay.
Cutter head put-on take-of
- Turn off button,press cutter teeth in thumbs,push forward in the direction of arrows
- In process of taking off cutter heads,one hand to push forward, the other support them, so as to avoid damage by falling down.
Kind Attention
- White ceramic blades are very fragile,apt to break when being put on or taken off. Be careful with that!
- When ceramic blades broke,they probably clamp hair and stop running.
- Recommended to replace the cutter head every 3 months.
- Sterilize blades regularly and make sure they are hygienic prior to cutting hair.
Cutter Head Cleaning and Maintenance
Cutter head features
- Clean off hair scraps with cleaning brushes
Kind Attention
- Caution: Never take offspring on head, otherwise they probably go wrong because the spring can not revert to the original state.
- Please take off the cutter blades after using clippers. Clean off scrappy hair on cutter head surface and in between blade niches, so as to avoid influencing their sharpness.
- Clean the cutter head with water, have to make it dry, otherwise, they get rusty.
- After each cleaning, please drop lubricating oil to maintain the clipper.
Cutter head lubrication
- Drop oil here. This place where upper blades and bottom ones move back and forth.
a couple of drops in 5 places
- After dropping oil, press on cutter frames and move them back and forth, which is to lubricate blades evenly.
Kind Attention
- Blade lifetime has something to do with running frequency,hair quality and maintenance.
- Replace worn cutter heads to avoid hair clamping.For any replacement part,kindly consult our agencies and repair service centers.Never fit other maker cutter heads on our clippers.
- During using the clipper,you know the cutter head may get a little warm. It’s quite normal and it doesn’t influence proper use.
Trimmer Body Cleaning & Maintenance
Body cleaning
- Wipe off cuffer hair scraps in cuffer head slots
- Also can wash clipper body with water
- Clean body, make the body dry with wipes, fit the cutter heads on it.
- Keep it well for future use.
Prohibited Matters
- Don’t wipe clipper body with gasoline, alcohol, thinner and other corrosive chemical agents.
- Otherwise, its out shell will change colour.
- Hereby suggest cleaning off the dirty mark of clipper surface with weak alkaline soap water.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>