a collection 7298406 Industrial Lamp Splash Water Indy Instruction Manual
- September 20, 2024
- a-collection
Table of Contents
a collection 7298406 Industrial Lamp Splash Water Indy Instruction Manual
On/Off Control
Functions and Options
-
On-off Control
This sensor is a motion switch, which tums on the light on detection of moving objects, and turns off after a pre selected holc-time when there is no motion detected. A daylight sensor is also built-n to prevent the light switching on when there is sufficient natural light.
Wiring Diagram
-
Ambient daylight threshold
** Switch the power supply to the sensor two times within 2 seconds, the sensor can set the ambient lux level as the new threshold. Both the settings on DIP switch and the ambient lux threshold leamed can overwrite each other. This feature enables the daylight sensor to be commissioned to the environment in which it is installed. The latest action controls.
(More details of the operation procedure please refer to user manual).** -
Zero-cross relay operation
Designed in the software, sensor switches on/off the load right at the zero-cross point, to ensure the in-rush current is minimized, enabling the maximum lifetime of the relay.
Detection Pattern
Settings
-
Detection area
Detection area can be reduced by selecting the combination on the DIP switches to fit precisely for each specific application.
-
Hold-time
Hold-time means the time period you would like to keep the lamp on 100% after the person has left the detection area.
-
Daylight sensor
The daylight threshold can be set on DIP switches, to fit for particular application.
When the daylight sensor is disabled the lamp will work always, even during daylight.
Note: end-user can also scan the QR code on the housing for DIP switch settings.
Ahlsell AB
117 98 Stockholm Sweden
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>