POTTER PFC-6000 Series Fire Alarm Control Panels User Manual

June 9, 2024
POTTER

PFC-6000 Series
Reporting Code Summary
(Panel Version 3.0) 

Report by Point

The following table identifies the reporting codes generated for specific panel events when reporting by point.

Report By Point SIA Format Contact ID Format
Description Event Code Parameter
System Power Up RR  
AC Power Trouble AT 10+id
AC Power Trouble Restore AR 10+id
Earth Trouble YP 10 00
Earth Trouble Restore YQ 10 00
Battery Trouble YT 10+id
Battery Trouble Restore YR 10+id
Battery Charger Trouble IA 10+id
Battery Charger Trouble Restore IR 10+id
     
RA-6075 Trouble ET 03+id
RA-6075 Trouble Restore ER 03+id
UD-1000 Trouble ET 04+id
UD-1000 Trouble Restore ER 04+id
SLCE-127 Trouble ET 05+id
SLCE-127 Trouble Restore ER 05+id
CA-6075 Trouble ET 07 00
CA-6075 Trouble Restore ER 07 00
CA-6500 Trouble ET 08 00
CA-6500 Trouble Restore ER 08 00
RA-6500 Trouble ET 09+id
RA-6500 Trouble Restore ER 09+id
PSN-1000 Trouble ET 10+id
PSN-1000 Trouble Restore ER 10+id
DRV-50 Trouble ET 13+id
DRV-50 Trouble Restore ER 13+id
RLY-5 Trouble ET 14+id
RLY-5 Trouble Restore ER 14+id
LED-16 Trouble ET 15+id
LED-16 Trouble Restore ER 15+id
FCB-1000 Trouble ET 16+id
FCB-1000 Trouble Restore ER 16+id
SPG-1000 Trouble ET 17+id
SPG-1000 Trouble Restore ER 17+id
FIB-1000 Trouble ET 18+id
FIB-1000 Trouble Restore ER 18+id
     
IP Reporting Ethernet Trouble LT 0
IP Reporting Ethernet Restore LR 0
DACT Line 1 Trouble LT 1
DACT Line 1 Restore LR 1
DACT Line 2 Trouble LT 2
DACT Line 2 Restore LR 2
DACT Communication Fail YC 0
DACT Communication Restore YK 0
Report By Point SIA Format Contact ID Format
--- --- ---
Description Event Code Parameter
DACT Com 1 Trouble YS 100
DACT Com 1 Restore YK 100
DACT Com 2 Trouble YS 200
DACT Com 2 Restore YK 200
DACT Primary Target Trouble YS id (1-20)
DACT Primary Target Restore YK id (1-20)
Date Changed JD  
Time Changed JT  
Local Program Successful LS  
Remote Program Successful RS  
Remote Program Failed RU  
System Reset OR  
System Manual Test RX  
Periodic Test – Normal RP  
Periodic Test – Off Normal RY  
Fire Drill Begin FI  
Fire Drill End FK  
Printer Off-Line Trouble VZ 17+id
Printer Off-Line Trouble Restore VY 17+id
Printer Out of Paper Trouble VO 17+id
Printer Out of Paper Restore VI 17+id
PC Connect Supervision Trouble NC User
PC Connect Supervision Restore NC User
Disable Events    
Waterflow Disable SB id + Address*
Aux Input Disable UB id + Address*
Supervisory Disable SB id + Address*
CO Disable GB Id + Address*
All Other Disables FB id + Address*
Enable Events    
Waterflow Enable SU id + Address*
Aux Input Enable UU id + Address*
Supervisory Enable SU id + Address*
CO Enable GU id + Address*
All Other Enables FU id + Address*
Alarm Events    
Manual Pull Station FA id + Address*
Water Flow SA id + Address*
Aux Contact Input UA id + Address*
CO Alarm GA id + Address*
All Other Alarms FA id + Address*
Alarm Restore Events    
Manual Pull FH id + Address*
Water Flow SH id + Address*
Aux Contact Input UH id + Address*
CO Alarm GH id + Address*
All Other Alarms FH id + Address*
Supervisory Events    
Supervisory SS id + Address*
Tamper SS id + Address*
Report By Point SIA Format Contact ID Format
--- --- ---
Description Event Code Parameter
CO Supervisory GS id + Address*
Supervisory Restore SR id + Address*
Tamper Restore SR id + Address*
CO Supervisory Restore GR id + Address*
Trouble Events    
Manual Pull Trouble FT id + Address*
Waterflow Trouble ST id + Address*
Aux Trouble UT id + Address*
Supervisory Trouble ST id + Address*
CO Trouble GT id + Address*
All Other Troubles FT id + Address*
Trouble Restore Events    
Manual Pull Trouble Restore FJ id + Address*
Waterflow Trouble Restore SJ id + Address*
Aux Trouble Restore UJ id + Address*
Supervisory Trouble Restore SJ id + Address*
CO Trouble Restore GJ id + Address*
All Other Trouble Restore FJ id + Address*
  • see Identifying Points for address details

Report by Zone

The following table identifies the reporting codes generated for specific panel events when reporting by zone.

Report By Zone SIA Format Contact ID Format
Description Event Code Parameter
System Power Up RR  
AC Power Trouble AT 10+id
AC Power Trouble Restore AR 10+id
Earth Trouble YP 10 00
Earth Trouble Restore YQ 10 00
Battery Trouble YT 10+id
Battery Trouble Restore YR 10+id
Battery Charger Trouble IA 10+id
Battery Charger Trouble Restore IR 10+id
     
RA-6075 Trouble ET 03+id
RA-6075 Trouble Restore ER 03+id
UD-1000 Trouble ET 04+id
UD-1000 Trouble Restore ER 04+id
SLCE-127 Trouble ET 05+id
SLCE-127 Trouble Restore ER 05+id
CA-6075 Trouble ET 07 00
CA-6075 Trouble Restore ER 07 00
CA-6500 Trouble ET 08 00
CA-6500 Trouble Restore ER 08 00
RA-6500 Trouble ET 09+id
RA-6500 Trouble Restore ER 09+id
PSN-1000 Trouble ET 10+id
PSN-1000 Trouble Restore ER 10+id
DRV-50 Trouble ET 13+id
DRV-50 Trouble Restore ER 13+id
RLY-5 Trouble ET 14+id
RLY-5 Trouble Restore ER 14+id
LED-16 Trouble ET 15+id
LED-16 Trouble Restore ER 15+id
FCB-1000 Trouble ET 16+id
FCB-1000 Trouble Restore ER 16+id
SPG-1000 Trouble ET 17+id
SPG-1000 Trouble Restore ER 17+id
FIB-1000 Trouble ET 18+id
FIB-1000 Trouble Restore ER 18+id
     
DACT Line 1 Trouble LT 1
DACT Line 1 Restore LR 1
DACT Line 2 Trouble LT 2
DACT Line 2 Restore LR 2
DACT Communication Fail YC 0
DACT Communication Restore YK 0
DACT Com 1 Trouble YS 100
DACT Com 1 Restore YK 100
DACT Com 2 Trouble YS 200
Report By Zone SIA Format Contact ID Format
--- --- ---
Description Event

Code

| Parameter| Qualifier| Event| Group| Zone
DACT Com 2 Restore| YK| 200| 3| 354| 00| 200
DACT Primary Target Trouble| YS| id (1-20)| 1| 354| 00| id
DACT Primary Target Restore| YK| id (1-20)| 3| 354| 00| id
DACT Secondary Target Trouble| YS| id (21-40)| 1| 354| 00| id
DACT Secondary Target Restore| YK| id (21-40)| 3| 354| 00| id
Date Changed| JD|  | 1| 625| 00| 000
Time Changed| JT|  | 1| 625| 00| 000
Local Program Successful| LS|  | 1| 628| 00| 000
Remote Program Successful| RS|  | 1| 412| 00| 000
Remote Program Failed| RU|  | 1| 413| 00| 000
System Reset| OR|  | 1| 305| 00| 000
System Manual Test| RX|  | 1| 601| 00| 000
Periodic Test – Normal| RP|  | 1| 602| 00| 000
Periodic Test – Off Normal| RY|  | 1| 608| 00| 000
Fire Drill Begin| FI|  | 1| 604| 00| 000
Fire Drill End| FK|  | 3| 604| 00| 000
Printer Off-Line Trouble| VZ| 17+id| 1| 336| 17| id
Printer Off-Line Trouble Restore| VY| 17+id| 3| 336| 17| id
Printer Out of Paper Trouble| VO| 17+id| 1| 335| 17| id
Printer Out of Paper Restore| VI| 17+id| 3| 335| 17| id
PC Connect Supervision Trouble| NC| User| 1| 330| User| 00
PC Connect Supervision Restore| NC| User| 3| 330| User| 00
Disable Events|  |  |  |  |  |
Waterflow Disable| SB| id + Address| 1| 571| id| Address
Aux Input Disable| UB| id + Address
| 1| 571| id| Address
Supervisory Disable| SB| id + Address| 1| 571| id| Address
CO Disable| GB| id + Address
| 1| 571| id| Address
All Other Disables| FB| id + Address| 1| 571| id| Address
Enable Events|  |  |  |  |  |
Waterflow Enable| SU| id + Address
| 3| 571| id| Address
Aux Input Enable| UU| id + Address| 3| 571| id| Address
Supervisory Enable| SU| id + Address
| 3| 571| id| Address
CO Enable| GU| id + Address| 3| 571| id| Address
All Other Enables| FU| id + Address
| 3| 571| id| Address
Zone Events|  |  |  |  |  |
Fire Alarm| FA| zone| 1| 110| 00| zone
Fire Alarm Restore| FH| zone| 3| 110| 00| zone
Supervisory| SS| zone| 1| 203| 00| zone
Supervisory Restore| SR| zone| 3| 203| 00| zone
Aux Alarm| UA| zone| 1| 140| 00| zone
Aux Alarm Restore| UH| zone| 3| 140| 00| zone
Fire Zone – Trouble| FT| zone| 1| 373| 00| zone
Fire Zone – Trouble Restore| FJ| zone| 3| 373| 00| zone
Supervisory Zone – Trouble| ST| zone| 1| 373| 00| zone
Supervisory Zone – Restore| SJ| zone| 3| 373| 00| zone
Aux Zone – Trouble| UT| zone| 1| 373| 00| zone
Aux Zone – Trouble Restore| UJ| zone| 3| 373| 00| zone

Report by System

The following table identifies the reporting codes generated for specific panel events when reporting by system.

Report By System SIA Format Contact ID Format
Description Event Code Parameter
System Power Up RR  
Date Changed JD  
Time Changed JT  
System Reset OR  
System Manual Test RX  
Periodic Test – Normal RP  
Periodic Test – Off Normal RY  
Remote Program Success RS  
Local Program Success LS  
Remote Program Fail RU  
Fire Drill Begin FI  
Fire Drill End FK  
System Alarm FA  
System Alarm Restore FH  
System Supervisory SS  
System Supervisory Restore SR  
System Trouble FT  
System Trouble Restore FJ  

Identifying Points

In order to uniquely identify points in all situations, points on specific PLink devices are assigned a distinct address reporting range as shown in the table below:

Plink Device Reported Address Notes:
Built-in SLC and SLCE-127 1-127
Built-in Power Supplies and PSN-1000/E 301-310 NAC1-6 reported as 301-306

I/O 1-4 reported as 307-310
DRV-50| 401-454| LED 1-50 reported as 401-450
Inputs 1-4 reported as 451-454
LED-16| 501-548| LED 1-48 reported as 501-548
RLY-5| 601-605| Relay 1-5 reported as 601-605

Example: A trouble associated with address 1 on a SLCE-127 #2.

Format:
SIA:
Contact ID| As shown in Table
FT  id+Address
373 id+Address| Actual Reported Data
FT 02 001
373 02 001
---|---|---

Example: A trouble associated with NAC 1 on PSN-1000 #2

Format:
SIA:
Contact ID| As shown in Table
FT  id+Address
373 id+Address| Actual Reported Data
FT 02 301
373 02 301
---|---|---

Example: A trouble associated with LED 1 on DRV-50 #2

Format:
SIA:
Contact ID| As shown in Table
FT  id+Address
373 id+Address| Actual Reported Data
FT 02 401
373 02 401
---|---|---

firealarmresources.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals