SYLVI Analog Specter Steel Watch Instruction Manual

SYLVI Analog Specter Steel Watch

Specifications

• Watch Dial Diameter: 32mm
• Watch Case Height: 46mm
• Watch Case Diameter: 40mm
• Watch Case Thickness: 9mm
• Stainless Steel Strap Width: 18mm
• Stainless Steel Strap Thickness: 4mm

Product Usage Instructions

Operation Instructions

How to Set Time:

1. Gently pull the crown out to position B.
2. Turn it in either direction until you reach the correct time.
3. After setting the correct time, push the crown back to position A (Normal).

How to Open / Close Buckle:

1. Find the small push button on the side of the clasp.
2. Gently press the push button.
3. As you press the button, you’ll notice the clasp opening.
4. To close the watch band, position the two ends together and gently press it.

Battery Instructions
The watch uses LR626 battery cells. To replace the battery:

1. Ensure to use LR626 battery cells.

Strap Instructions
The stainless steel strap has a width of 18mm, a thickness of 4mm,and length of 16cm. To replace the strap, use one with a lug size of 18mm.

Water Resistant Instructions
This watch is rated 3 ATM water resistant. Follow the guidelines below for water-related use:

• Splash Resistant (Hand Washing): Avoid full submersion in water.
• Submersible (Swimming): Suitable for swimming activities but not for diving.
• Shallow Diving (Snorkeling): Suitable for shallow diving activities like snorkeling.
• Scuba Diving (Not Deep Sea): Not suitable for deep-sea diving.

FAQ

Warranty Information

Your watch is warranted for six (6) months from the original date of purchase. The warranty covers manufacturing defects in the watch movement, hands, and dial only. For warranty claims, contact us at [contact information].

This warranty does not cover damages due to unauthorized service or factors not related to defects in materials and workmanship.
Ensure that serial numbers and product date codes are intact for warranty claims.

Click
here to open additional warranty information.

(Sylvi Specter)
www.sylvi.in

Brief Introduction

Function Instruction

Watch Dial

• Diameter: 32mm

Watch Case

• Height: 46mm
• Diameter: 40mm
• Thickness: 9mm

Stainless Steel Strap

• Width: 18mm
• Thickness: 4mm

Water Resistant
3 ATM

Operation Instructions

How to Set Time:-

1. Gently pull the crown out to position B.
2. Turn it in either direction until you reach the correct time.
3. After setting the correct time, push the crown back to position A (Normal).

How to Open / Close Buckle

1. Find the small push button on the side of the clasp.
2. Gently press the push button.
3. As you press the button, you’ll notice the clasp opening.
4. To close the watch band, position the two ends together and gently press it

Battery Instructions

Strap Instructions

Stainless Steel Strap

• The strap with 18mm width 4mm thickness & 16cm Length.
• A replacement belt of lug size 18mm is suggested for this watch.

Water Resistant

For information about the water-resistant rating of Sports, Casual, Chronograph, and Slim watches please refer to page 3.
The water resistant rating provides guidelines for appropriate water-related exposure to avoid damage to internal watch components. Please see the chart for recommended us-age guidelines.

To ensure water does not enter the watch and cause damage to it,please follow the instructions listed below:

• Do not adjust the crown while the timepiece is in contact with water.
• Ensure the crown is in the closed position before contact with water. For timepieces with screw-down crowns, ensure the crown is completely tightened before contact with water.
• For timepieces with pusher-enabled functionality, do not engage the function underwater.
• Exposure to the extreme atmosphere is not recommended (i.e. hot water, saunas, or steam rooms).
• Avoid exposure to water moving with force (i.e. water running from a faucet, ocean waves, or waterfalls).
• Avoid long exposure to saltwater. After contact with salt water, rinse the watch under tap water
• If rated 5ATM or higher and wipe dry with a soft cloth.

Recommendations For Water-Related Use

Warranty Instructions

Your watch is warranted for six (6) months from the original date of purchase under the terms and conditions of the warranty. The warranty covers manufacturing defects, i.e. the watch movement, hands, and dial only. The covered components will be repaired or the watch will be replaced free of component and labor charges if it proves to be defective in material or workmanship under normal use.

• In case of replacement, we cannot guarantee that you will receive the same model watch.
  If your model is not available, a watch of equal value and similar style will be provided.

This warranty does not cover:

• Any defect in materials and workmanship of battery, case, crystal, button, crown, strap, or bracelet; including plating on the case and/or bracelet.
• Damage resulting from improper handling, lack of care, accidents, normal wear and tear or aging.
• Water damage if care instructions for the product’s water resistance levels (as per the product specification) were not followed.
• Products that are not purchased from an authorized retailer.
• This warranty is void if the watch has been damaged by accident, negligence of persons other than authorized sales or service agents, unauthorized service, or other factors not due to defects in materials and workmanship. This warranty is void if the serial number or product date codes or other tracking marks have been removed, altered, or obliterated.

Get Additional Warranty

https://support.sylvi.in/warranty-registration Click Here to Open

How to Claim Warranty?

Step 1:
Contact customer care and report your problem. An RMA ID will be generated (Without RMA ID, warranty cannot be claimed)

Step 2:
The product will have to be sent to service center including the following information.

• RMA ID – Given by customer care executive
• Name
• Full address
• Daytime contact mobile number
• Email address
• Where your item was purchased from
• Model reference of the item (Found on the back of your watch)
• Full description of the work required
• A copy of your proof of purchase

How to Reach Us?

For any service-related inquiries and feedback, call our number +919687660234 Monday to Saturday, 10.00 am to 6.00 pm.
(closed on National and Festival holidays).

If you are unhappy for any reason, please mail us at customercare@sylvi.in. We promise to reply by the next working day.

• tel:+919687660234
• https://wa.me/+919687660234
• customercare@sylvi.in
• https://www.facebook.com/sylvi.in
• https://twitter.com/sylvi_in
• https://in.pinterest.com/sylvi_in/
• https://instagram.com/sylvi.in
• https://www.linkedin.com/company/sylvi/
• https://www.youtube.com/@sylvi-watch

www.sylvi.in

References

• Sylvi | Warranty Registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>