COMELIT KCA0061 Wire Analogue Single Family Audio Door Entry Kit Instruction Manual
- September 26, 2024
- Comelit
Table of Contents
- COMELIT KCA0061 Wire Analogue Single Family Audio Door Entry Kit
- Product Information
- Product Usage Instructions
- FAQ
- CA0061 Installation Instructions
- 1200 Installation Instructions
- 2812W Installation Instructions
- Operating distances
- Connections
- More Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
COMELIT KCA0061 Wire Analogue Single Family Audio Door Entry Kit
Product Information
Specifications
- Model: CA0061
- Dimensions: 172mm x 100mm x 28mm
- Power Input: 230V AC
- Power Output: 12V AC
- Operating Distances: A – 50m, 100m, 200m; B – 30m, 60m, 120m; C – 10m, 20m, 30m; D – 15m, 30m, 60m
Product Usage Instructions
BAL Balancing Trimmer SPK / BAL Balancing adjustment trimmer SPK / Trimmer balance SPK / Trimmer speaker volume control:
- Adjust the balancing of the loudspeaker using the provided trimmer.
MIC Trimmer for adjustable volume / MIC Microphone volume adjustment trimmer / Trimmer for adjusted volume microfone / Trimmer for microphone volume adjustment:
- Use the trimmer to adjust the volume of the microphone or loudspeaker as needed.
Ringtone Volume Selector:
- Use the selector to adjust the volume of the ringtone. The red indicator signifies silent mode.
Cut off CV1:
- If connecting a door lock with an impedance lower than 10 ohms, cut off CV1 as instructed.
Additional Door-Entry Phone Connection Variant:
- For connecting an additional door-entry phone, follow the specified connection variant provided in the manual.
FAQ
Frequently Asked Questions
- Q: How do I adjust the ringtone volume?
- A: You can adjust the ringtone volume using the ringtone volume selector. The red indicator shows when the ringtone is in silent mode.
- Q: What should I do if I need to connect a device with impedance lower than 10 ohms?
- A: In case of connecting a device with impedance lower than 10 ohms, you should cut off CV1 as instructed in the manual.
- Q: How do I connect an additional door-entry phone?
- A: To connect an additional door-entry phone, follow the connection variant specified in the manual for this purpose.
CA0061 Installation Instructions
Art. CA0061
Dimensions
Installation Instructions
- BAL Balancing adjustment trimmer
- SPK Loudspeaker volume adjustment trimmer
- MIC Microphone volume adjustment trimmer
1200 Installation Instructions
Art. 1200
- Secondary 12 V AC output.
- 230 V AC digital input.
Appliance exclusively for indoor use. Risk of electric shock; proceed with
caution. Install inside a closed electrical panel so that it may only be
accessed by authorised personnel.
A suitable omnipolar switch with a contact opening of at least 3 mm must be
installed upstream of the video entry phone system.
- Disconnect the power supply before carrying out any operations on the wiring.
- Replace the protections on the terminals.
2812W Installation Instructions
Art. 2812W
Dimensions
Installation Instructions
Info
- Ringtone volume selector
- Red indicator: ringtone in silent mode
Operating distances
- Cut off CV1 if a door lock with impedance under 10 Ω is connected
Connections
Use of additional button for various purposes
Connection of call repetition devices
Additional door-entry phone connection variant
More Information
- www.comelitgroup.com
- Via Don Arrigoni, 5 – 24020 Rovetta (BG) – Italy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>