trimm two Bike Computer User Manual

trimm two Bike Computer User Manual

Components

The trimm Two package consists of a trimm Two body, a mount, a charging cable, a anti-slip strap, a dust plug, a dual sensor(optional), and additional frame (optional).

• mount

• anti-slip strap

• dual sensor(optional)

• dust plug

Pairing to your phone

When using the device for the first time, connect it with your smartphone to configure the device and learn aboutits basic functions.

1. app.

2. Run the trim Cycling Center app. 3. Touch the button next to the
   Start button. Or touch More > Device management.

3. Press the buttons at the bottom of the device according to the instructions.

4. Confirm that the numbers on the device match those on the app.

Configuring data field

1. Run the trim Cycling Center app.
2. Touch More > Device management > Data fields.
3. Select the page you want to change.
4. You can customize the data field by pressing the “layout” and “information” buttons.

Mounting the sensor
*Before mounting the sensor, secure the bicycle so that it does not shake or fall over.

Step 1. Mounting the dual sensor

1. install the sensor to the wheel hub (speed sensor)/non-drive crank arm (cadence). *If you mount the sensor on an asymmetric hub, the sensor may tilt, but it does not affect the performance of the device.
   speed

cadence

Caution
Please refer the User’s Manual for product warnings and other information’s. Doctor’s Advise is recommended prior to exercises a nd manipulating the program
Buttons functions
Turn On press
Reboot press and hold for
Next Page press and hold
button instructions

For additional functions while in use, check the instructions shown at botton- right/left corners of the display. Charging Please charge the device after the charging part is completely dried. If the charging port touches the water, it may corrode. The trimmTwo uses a lithium-ion battery. Excessive impact or bending may damage the battery, posing a danger of fire.
charging

2. Spin the wheel/non-drive crank arm
   fitted with the sensor to check that it is fixed, then connect with the trimm Cycling Center app.

Step 2. Connecting the sensor

1. Run the trimm Cycling Center app.
2. Touch More > Sensors, (Please activate the Bluetooth function ofthe linked smartphone)
3. Once the sensor screen appears, it searches for the sensor automatically.

Scan the QR code for more Instructions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>