HOMCOM 833-595 MDF Freestanding Kitchen Cabinet Instruction Manual
- September 25, 2024
- HOMCOM
Table of Contents
HOMCOM 833-595 MDF Freestanding Kitchen Cabinet
Specifications :
- Model: IN230700366V02_GL
- Part Number: 833-595
- Region: US_CA
- Components: Hardware Kit
Product Usage Instructions
Hardware Kit Assembly:
- Open BOX-1/2 and identify the components inside.
- Assemble the hardware according to the provided instructions:
- A: 29 units
- B: 29 units
- C: 38 units
- D: 4 units
- E: 2 units
- F: 36 units
- G: 32 units
- H: 2 units
- I: 2 units
- J: 6 units
- K: 2 units
- L: 1 unit
- M: 2 units
- N: 2 units
- O: 4 units
- Proceed to BOX-2/2 and continue assembling the remaining components.
Product Setup:
- Follow the steps provided in the manual for setting up the product.
- Complete step 1 through step 4 to ensure proper installation.
- Connect components N, M, and O according to the vinstructions.
- Finish setup by following steps N, M, and O I.
Frequently Asked Questions (FAQ):
-
Q: How many units of component A are included in the hardware kit?
A: There are 29 units of component A included in the kit. -
Q: What steps are involved in setting up the product?
A: The setup involves steps 1 to 4 as outlined in the manual, including connecting components N, M, and O. -
Q: Are there any specific requirements for assembling the hardware kit?
A: Yes, follow the provided instructions carefully to ensure proper assembly of the components.
IN230700366V02_GL
Tools Recommended
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
IF HAVE THIS ACCESSORY
QUICKFIT: Tighten quickfit until shoulder is flush with panel-Do not overtighten or undertighten,
CAM LOCK : When fitting cam lock, ensure starting position is correct before you insert connecting quickfit.
- Quickfit head should be in the centre of the cam lock when the two panels are joined. Cam lock should be inserted before quickfit.
- Turn cam lock clockwise to tighten.
- lt may be necessary to adjust the hinges so that the doors align. Use the instructions below as a guide.
- To adjust the door vertically loosen the screw asshown and move up and down as needed.
- To adjust the gap from the door to the main frame turn the screw clockwise or anti-clockwise as needed.
- To adjust the door laterally adjust the screw as shown by turning clockwise or anti-clockwise.
- Please fix other screws
- lf it is a solid wall, please use expansion and self-tapping screws, if it is a wooden wall, only use self-tapping screws, please do not overtighten the screws
- This is anti-dumping belt that fix the product to the wall and it can be used or not follow your needs.
- The buckles have N optional adjustment
- Adjust up and down for balance
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>