Feelworld 1000nit 13.3 Inch High Bright Broadcast Monitor User Manual

September 24, 2024
FEELWORLD

Feelworld 1000nit 13.3 Inch High Bright Broadcast Monitor

Product Information

Product Specifications

  • Model: 1000nit Broadcast Monitor
  • Sizes Available: 13.3 inches, 21.5 inches
  • Display: Full HD panel
  • Brightness: 1000nit, high bright for visibility in sunlight
  • Input/Output: Support 4K@60 HDMI Input and Output
  • Audio Channels: Max 8 channels under HDMI signal, max 16 channels under SDI signal
  • Features: HDR monitoring, Custom 3D-LUT, Waveform, RGB Histogram, Focus Assist, Monochrome functions
  • Speakers: Dual speakers
  • Power Supply: DC IN, XLR, V-mount battery plate

Product Usage Instructions

Caution:

  • Use the provided adapter and qualified battery.
  • Avoid direct exposure to sunlight, heat, and humidity.
  • Keep the monitor away from strong light for optimal image quality and longevity.
  • Avoid heavy impact or dropping the monitor.
  • Do not use chemical solutions for cleaning; use a clean soft cloth instead.
  • Avoid disassembling or repairing the unit by yourself.

Product Features:

  • Full HD panel for detailed viewing
  • High bright 1000nit display for visibility in sunlight
  • Intuitive buttons with 4 custom function shortcut buttons
  • Supports 4K@60 HDMI Input and Output
  • HDR monitoring and Custom 3D-LUT for film preview
  • Includes functions like Waveform, RGB Histogram, Focus Assist, Monochrome for exposure and focus accuracy
  • Dual speakers and built-in Tally lights for team cooperation

Product Description:

Front Panel (example based on 21.5 model):

  • Speaker and 3.5mm headphone jack
  • Mute Key for audio control
  • Signal Input Selection button
  • Custom Function Key for menu navigation and setting shortcuts
  • Power Indicator and Power ON/OFF switch

Rear Panel:

  • Tally Indicator lights (Red, Green, Yellow)
  • Handle and V-mount Battery Plate for power options
  • 2*3G-SDI Signal Inputs and Outputs
  • 2HDMI Signal Inputs and 1HDMI Signal Output
  • DVI Signal Input (VGA input from this port after conversion module signal conversion)

FAQ

Frequently Asked Questions

  • Q: How do I clean the monitor?
    • A: Use a clean soft cloth to wipe the monitor surface. Avoid using chemical solutions for cleaning.
  • Q: Can I repair the monitor by myself?
    • A: To avoid damaging the product, do not take apart or repair the unit by yourself without adjustable components.
  • Q: How many audio channels can be displayed under HDMI and SDI signals?
    • A: Under HDMI signal, up to 8 channels can be displayed, and under SDI signal, up to 16 channels can be displayed.

Foreword

Thank you for purchasing our high bright broadcast monitor. Please read this manual carefully before using the unit. Have a great experience!

Caution

  1. Please use the adapter in the accessory, and use the qualified battery if need.
  2. Please do NOT expose this product directly in the sunlight, heat, and humid conditions.
  3. Please keeps the monitor away from the strong light while using this product to ensure the image effect and long-term use.
  4. Please avoid heavy impact or drop onto the ground.
  5. Please do NOT use chemical solutions to clean this product. Please wipe the monitor with a clean soft cloth to maintain the brightness of the surface.
  6. To avoid damaging the product, please do not take apart or repair the unit by yourself without adjustable component in the unit.

Product Feature

  • Full HD panel, viewing details with confidence
  • High bright 1000nit, visible in sunlight
  • Intuitive buttons operation, 4 custom function shortcut buttons to improve work efficient
  • Support 4K@60 HDMI Input and Output
  • Under HDMI signal the audio meter level can be display max 8 channels; under SDI signal can be display max.16 channels
  • HDR monitoring, what you see is what you get
  • Custom 3D-LUT, preview film look
  • With Waveform, RGB Histogram, Focus Assist, Monochrome etc. functions, help you accurately exposure and focus every shot
  • Dual speakers
  • Built-in front and rear Tally light, enhance team cooperation
  • Multiple power supply ways (DC IN, XLR , V-mount battery plate)

Product Description

Product Description (Take 21.5″ as an example)

Note

  • Different sizes are slightly different in appearance, please refer to the actual product.

Front Panel

Number Instruction
Speaker
3.5mm headphone jack
Mute Key

When the menu is not displayed, press it to turn on mute. When turned on, the button will display a green constant light; closed the mute function ,

the button light turn off

④| Signal Input Selection

When the menu is not displayed, the signal input source can be selected. After selection, the button will display a green constant light.

⑤| Custom Function Key

Users can enter the main menu User Option – Shortcut Key to set F1~F4 as common function keys. After setting and close menu, simply press

to turn on or off the function

---|---
⑥| Return/Exit menu
⑦| Function when OSD is displayed

Rotate to select the desired function or parameter, and press confirm after selection Function when OSD is not displayed

Rotate to adjust volume or backlight (can be set to volume or backlight in the menu User Option – Left Right Key Set)

Press to enter main menu

⑧| Power Indicator

After the monitor is properly connected to the

power, turn on power switch the indicator display red, and display green after input signal

⑨| Power ON/OFF
⑩| Tally Indicator(Red、Green、Yellow)

Rear Panel

Number Instruction
Tally Indicator(Red、Green、Yellow)
Handle
V-mount Battery Plate
2*3G-SDI Signal Inputs and Outputs
2HDMI Signal Inputs,1HDMI Signal Output
DVI Signal Input (VGA input from this port after conversion module signal

conversion)
⑦| Tally (Indicator) Signal Input
⑧| LUT File/Upgrade File Importing port
---|---
⑨| The direct DC plug-in power input port supply
⑩| 4-pin XLR DC power input
⑪| VESA Holes (100x100mm)

Power Input Way

There are three ways of power supply to our monitor:

  • Powered by the direct plug-in power input port supply.
    • Please select DC power plug supply and the polarity is as image below:
  • Via 4 pin XLR interface power supply, to share power with the camera or via power adapter input.
    • Polarity of the 4-pin XLR power input as below image, please note the polarity of the power input, otherwise it may damage monitor.
  • Add battery to the monitor battery plate to supply the power.
    • The product back case including battery plate is available for two types of batteries. Customers can choose different battery plates according to their needs. (If the customers have no requirement on the battery, the factory assembles Sony V-Mount Plate by default).

Battery Plates

  • We assemble the suitable battery plate for the customers according to the different requirements of the batteries. If the customers have no requirement on the battery, the factory assembles Sony V-Mount Plate by default.
    • Remark: According to the different specification of the battery, the capability is different, and the working time for the monitor will be different. Higher capability (working time) will be longer.
  • Without the charging circuit design for the monitor, please remove the battery to charge with the battery charger.
    • Suggestion: Better to remove the battery if don’t use this product in a long time.

TALLY Indicator Connection

Indicator colors Pin connection
Green 1-5
Red 6-5
Yellow 9-5

After the monitor is properly connected to the power, turn on the monitor power switch.

  1. Press MENU knob to enter OSD main menu, and rotate it to select the first level menu, the icon will turn gray after selected, press MENU knob confirm to enter the secondary menu.
  2. After enter the secondary menu, rotate MENU knob to select the function, and press it confirm to enter three level menu, then rotate MENU knob to select turn on/off the function or select the detail parameter, press MENU knob confirm after selected
  3. Press EXIT button to exit the menu

Assist

Marker

Image

User Option

System

How to Import Custom LUT

  1. USB flash driver format
    • Supports FAT32
  2. Max Files Limit Maximum 32 Lut files
  3. File requirements
    • The LUT file format suffix should be .cube
    • Single file not exceeded to 7.9Mb
    • Support LUT-3D-Size 16,17,32,33,64,65
    • Remark: LUT file name must be English or Arabic numerals
  4. Steps for loading
  5. Make sure the USB flash driver correctly insert
  6. Enter main menu User Option–LUT– Import — Confirm to load the monitor will auto detect the USB flash driver
  * If there is valid LUT file in USB flash driver, the monitor will load LUT files and show “[n] name. The [n] shows the quantity number. The “name” should in LUT files’ name. If load successful, the screen will show “complete[n]”. [n] Stands for the quantity number for LUT files should under 32.

PS: How to clear up the imported LUTs?

  • Insert a empty USB flash driver to the monitor, enter main menu User Option–LUT– Import — Confirm, the imported LUTs will be clear up.

Support Signal Format

HDMI

  • 720p(60/59.94/50/30/29.97/25/24/23.98)
  • 1080i (60/59.94/50)
  • 1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)
  • 4K UHD 3840×2160p (60/50/30/29.97/25/24/23.98Hz)
  • 4096×2160p (60/50/30/29.97/25/24/23.98Hz)

SDI

  • 720p(60/59.94/50/30/29/25/24/23.98)
  • 1080i(60/59.94/50)
  • 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)

Parameters

Panel Size 13.3″ 21.5″
Resolution 1920×1080 1920×1080
Dot Pitch (mm) 0.153 (H) X 0.153 (V) mm 0.24795 (W) X 0.24795 (H) mm
Aspect Ratio 16:9 16:9
Brightness 1000cd/m² 1000cd/m²
Contrast 800:1 1000:1

Viewing Angle

| ****

85°/85°(L/R) 85°/85°(U/D)

| ****

89°/89°(L/R) 89°/89°(U/D)

Backlight| LED
Inputs| 23G-SDI , 2HDMI 2.0, DVI-I, Tally
Outputs| 23G-SDI, 1HDMI 2.0
Upgrade/LUT| USB2.0
Audio| Speakers, 3.5mm Headphone Jack
Input Voltage| DC 10~24V
Power| ≤ 28W| ≤ 44W
Special Function| TALLY Indicators
Working| 0℃ ~ 50℃
Storage| -20℃ ~ 60℃
Unit Size| 330.5x231x30.15mm| 511.5×355.5×34.8mm
Unit Weight| 2.07kg (w/o feet stand)| 4.16kg (w/o feet stand)

Trouble Shooting

If there is any problem when using the unit, please try following ways to inspect and solve. Please contact us if you still cannot solve it or have other problems.

●  Without image display Troubleshooting

◆ Video cable off or connect incorrectly| Check the quality of the cable, make sure the correct input interface

◆ Without video signal input

| Check the signal source and output interface connect is corrected or not

◆ Monitor cannot be powered on

| Check whether the power is connected, put the power switch to “ on ” position

◆ Supply voltage instability

| The power adapter or battery is poor connected

with battery plate

◆ self-contained power supply, polarity connect inversely|

Reference “Power input way” reconnect

●  Image/color display abnormal          Trouble shooting

◆ Video cable poor contact| Change video cable, try again
◆ Video signal interfered by external environment| Move to another environment to try again
◆ Video input signal amplitude too low| Check signal source video output, or change signal source and have a try.
◆ Menu color saturation adjustment closing| Enter menu to check color, or reset to factory settings
◆ Check Field set in mono or black & white| Reset Check Field, back to the color
◆ Image deformation| Reset the image ratio

●  Speaker without sound                      Troubleshooting

◆ Audio cable off or improper connection| Confirm connected with the corresponding input port
◆ Volume adjustment was closed| Reset the volume control and adjust to a proper position
◆ HDMI cable poor Connected| Check the quality of cable, or change cable and have a try
---|---
◆ No sound after switch video signal| This monitor is with audio signal only in audio input and HDMI state

Remark:

  • If there are still other problems, please contact with our related technical persons.
  • If there are changes without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals