DELL-E2725H 27 Inch Computer Monitor

“`html

Product Information

Specifications:

• Brand: Dell
• Model: E2725H Monitor
• Non-Volatile Components:
  • System EEPROM: Non-volatile memory, 16 KB
  • System Flash: Non-volatile memory, 8 MB
  • System EEPROM: Non-volatile memory, 2 KB

Product Usage Instructions:

Powering On and Off:

To power on the Dell E2725H Monitor, press the power button
located on the front panel. To power off, press the power button
again.

Adjusting Settings:

You can adjust the monitor settings such as brightness,
contrast, and color temperature using the menu buttons on the
monitor. Navigate through the menu using the arrow buttons and make
changes using the selection button.

Connecting to Devices:

Connect your devices such as a computer or laptop to the monitor
using the appropriate cables (HDMI, VGA, etc.). Make sure to select
the correct input source on the monitor to display content from
your connected device.

FAQ:

Q: What should I do if I encounter a power loss situation?

A: In case of primary power loss, ensure to
back up any important data stored on the memory (DDR4, 2667 MHz) as
it will be erased. For secondary power loss, avoid removing the
on-board coin-cell battery to prevent loss of system configuration
and time-of-day information.

“`

Statement of Volatility ­ Dell E2725H Monitor
CAUTION: A CAUTION indicates either potential damage to hardware or erasure of data and tells you how to avoid the problem.

The Dell E2725H Monitor contains both volatile and non-volatile components. Volatile components erase their data immediately after power is removed from the component. Non-volatile components continue to retain their data even after power is removed from the component. The following Non-volatile components are present on the Dell E2725H Monitor system board.

Table 1. List of Non-Volatile Components on System Board

Description

Reference Designator

Volatility Description

User Accessible for external data

Remedial Action (action necessary
to erase data)

System EEPROM System Flash System EEPROM

Non-volatile memory, 16 KB

U4003

for Storage of system setting

No

N/A

Non-Volatile memory, 8 MB for

U4002

Storage of system firmware

No

N/A

Non-volatile memory, 2 KB

U1201

for Storage of system setting

No

N/A

CAUTION: All other components on the system board lose data if power is removed from the system. Primary power loss (unplugging the power cord and removing the battery) destroys all user data on the memory (DDR4, 2667 MHz). Secondary power loss (removing the on-board coin-cell battery) destroys system data on the system configuration and time-of-day information.

© 2024 Dell Inc. or its subsidiaries. All Rights Reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
2024-Aug

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>