EJEAS F6, F6 PRO Referee Mesh Intercom System User Manual
- September 24, 2024
- EJEAS
Table of Contents
F6, F6 PRO Referee Mesh Intercom System
“`html
Specifications
-
Product Name: Referee Mesh Intercom System F6 / F6 PRO
-
Intercom Capacity: Connects up to 6 people
-
Intercom Distance: 400-800 meters
-
Features: Voice recording (F6 PRO only), Microphone mute, LED
lights, Software upgradeable -
Interface: TYPE-C Charging / Earphone
Product Usage Instructions
Power On / Power Off / Battery Level
To power on the device, press and hold the On/Off
Button for about 1 second until the blue light flashes and
a power-on beep sounds. The device will be in standby mode with the
blue light flashing slowly.
To power off, press and hold the On/Off Button
for about 1 second until you hear the power-off tone.
To check the battery level, press and hold both the
Vol+ and Vol- buttons for about 1
second, and a voice prompt will announce the battery level
(high/medium/low).
Mesh System Pairing
To initiate Mesh system pairing, ensure all devices are in
pairing mode. Press and hold the Intercom Button
for about 5 seconds until you hear the prompt “Mesh system pairing”
and see red and blue lights flashing alternately.
Select one device as the pairing server, then short press the
Intercom Button. You will hear a beep sound, and
the red and blue lights will flash alternately.
Wait for the prompt “Pairing successful” to indicate successful
pairing. Once all devices announce “Pairing Successful,”
communication between devices is established.
FAQ
What is the maximum intercom distance of the Referee Mesh
Intercom System?
The intercom distance can reach up to 400-800 meters in
diameter.
Can I use any type of headphones with the device?
No, only standard headphones can be used with the Referee Mesh
Intercom System.
How do I mute the microphone on the device?
To mute the microphone, short press the Mic Mute
Button. The device will prompt “Microphone Mute.” Short
press the button again to unmute.
“`
MESH Intercom Expert
More Languages
Referee Meshintercom
System
Referee Mesh Intercom System
F6 / F6 PRO
User Manual
Webwww.ejeas.com
Product
Vol+ Vol-
Referee Meshintercom
System
On/off Button
Intercom Button Voice Record Button PsRecording for oinly F6 Pro
Charging / Earphone Interface Note : Only standard headphones can be used
Mesh 6-Person Intercom One Click Connection
Microphone Mute
400-800m Intercom Distance
LED Lights
Software Upgraded
TYPE-C
Red
Blue
Product Models
Mesh System
F6 PRO Referee Intercom
Can connect 6 people, with recording function, Super penetrating power, Intercom distance reaches 400-800 meters in diameter
Mesh System
F6 Referee Intercom
Can connect 6 people, Super penetrating power Intercom distance reaches 400-800 meters in diameter
Intercom power on recovery
Referee Meshintercom
System
Microphone Mute
Referee Meshintercom
System
If you shut down the phone without turning off the intercom, the intercom will
automatically resume the next time you turn it on.
Short press the
press the
Operations
Button Description
Referee Meshintercom
System
Referee Meshintercom
System
Referee Meshintercom
System
3s
Referee Meshintercom
System
5s
Short press/click Long-press for 1s Long press for 3s Long press for 5s
Basic Operation
On & Off / Battery Level Please fully charging before using
Referee Meshintercom
System
1s
Referee Meshintercom
System
Power On
Press and hold (about 1s) the
Blue light flashes slowly “Di Di Di”
Power Off
Press and hold (about 1s) the
Reset: Press the
Battey Level
When using USB charging, the red light is always on. When the battery is low,
the red light flashes twice quickly and there is a voice prompt of “low
battery”. When the battery power is too low, the device automatically shuts
down.
Battery Enqury
Press and hold (about 1s)
Red light flashes quickly “Low battery”
MESH System
Referee Meshintercom
System
5s
Referee Meshintercom
System
Matchmaking Server
All walkie-talkies first enter the Mesh system intercom pairing state, press
and hold the
Red/blue light flashes alternately “Mesh System Pairing”
Take one of them as the pairing server, short press the
Red light and blue light flash alternately “Beep”
3
Wait for a moment and when you hear the prompt “Pairing successful”, it means
the pairing is successful.
“Pairing successful”
4 Wait a moment and hear all the walkie-talkies prompt “Pairing Successful”. At this time, pairing has been completed and you can talk to each other and hear each other’s voices.
Mesh intercom reconnection
Close Mesh intercom
Referee Meshintercom
System
Referee Meshintercom
System
Short press the
After a while, it will prompt “Pairing Successful”
and you can start intercom.
To turn off Mesh intercom, press and hold the
and it will prompt “Mesh system is shut down”.
4