Pyle PDWR53BTBK 300 Watt Bluetooth Stereo Speaker System Instruction Guide

Pyle PDWR53BTBK 300 Watt Bluetooth Stereo Speaker System

Specifications

• POWER OUTPUT: 300 Watt MAX
• SPEAKER SIZE
• SOUND SYSTEM: 25’’ Subwoofers: 0.5’’ Tweeters
• SUBWOOFER TYPE: Polymer PP
• TWEETER TYPE: Mylar Dome
• FREQUENCY RESPONSE: 70 – 16 kHz (+/-3dB)
• SPEAKER IMPEDANCE : 8 Ohm
• AUDIO SENSITIVITY: 86 dB
• CONSTRUCTION MATERIAL: Metal Alloy, Reinforced Polypropylene
• POWER CABLE LENGTH: 9’ ft.
• POWER SUPPLY: 120-240V
• SINGLE SPEAKER DIMENSIONS (L X W X H): 2” x 6.5” x 9.6” -inches (Each)

Introduction

The Pyle 5.25-Inch 300-Watt Bluetooth Stereo Speaker System 8 Pack will amp up the energy and deliver the ultimate experience. Bring this fun 8-pack, which has Bluetooth wireless music streaming capabilities, to any celebration or enthusiastic gathering. These wireless speakers will keep you entertained indoors or out. As you make your way to the rear pool, leave the speaker set up on the porch. Take the 2-way stereo set indoors at night’s end to put up a surround sound system as your party unwinds with a movie.

What’s In The Box

• Active Wall Mount Speaker
• Passive Wall Mount Speaker
• Power Cable

Features

• Versatile Wall Mount Speaker System
• Includes (2) Speakers (Active + Passive)
• Universal Indoor Home Speaker Installation
• Bluetooth Wireless Music Streaming
• Built-in Digital Sound Amplifier
• 2-Way Full Range Stereo Sound Reproduction
• Impressive Bass Response
• Rear Panel Audio Settings Control Center
• Connect & Stream Audio from External Devices
• RCA (L/R) Audio Connector Jacks
• Aux (3.5mm) Input Jack (Loop + Sub)
• Screw Terminal Block Speaker Connectors (Active Speaker)
• Rotary Volume, Bass, Treble Adjustment
• Power LED Indicator Light
• Adjustable Angle Wall Mount Brackets
• Rugged & Heavy Duty Cabinet Enclosure
• Unique Standby / Auto Power On with Audio Signal Input
• Removable & Rust Proof Metal Speaker Grills
• Daisy-chain Ability (Active to Passive Speaker) Stereo System
• Used for Home, Garage, Enclosed Patio & Porch Deck Applications
• Recommended for Indoor Use Only

Wireless BT Streaming Connectivity:

• Built-in BT for Wireless Music Streaming
• Simple & Hassle-Free Pairing
• Works with All of Today’s Latest Devices (Smartphones, Tablets, Laptops, Computers, etc.)
• Wireless BT Version: 4.2
• Wireless BT Network Name: ‘PyleUSA’
• Wireless Range: 33’+ ft.

SAFETY INSTRUCTIONS

1. When the speakers are installed in the wall, ensure the wall structure is reliable and that the speakers are firmly attached.
2. Install the speaker in a location that can structurally support the weight of the speaker and its mounting hardware. Otherwise it may result in the unit falling down and causing personal injury.
3. Do not use nails, adhesives or other unauthorized devices. Long-term use and vibrations may cause it to fall easily.
4. Do not touch or bump the woofer and tweeter. If these are damaged, the sound will be distorted.
5. Lower the sound volume when you are changing the input source (for example, to tune FM/CD). Make sure that the power amp/amplifier device radio is turned off when installing or removing the cables.

Users Have a Responsibility to Place or Install Safety

The speakers that are placed in the holder can be either wall or ceiling type, using screws to be placed inside of the speakers in the back is optional.

1. Mark the mounting bracket as a template with the regional location of the hole slots.
2. Then use the appropriate hardware and tools (not- supplied) to properly fix it to the bracket wall/ceiling.
3. Place the speakers to the bracket using the screws and washers according to the speaker.

PACKING LIST

INSTALLATION

Connecting Speakers

1. Use the wire on the back of the speaker in the output tab of the amplifier (or radio amplifiers). The standard colors on the terminals are red Positive (+) and black Negative (-). Connect the red wire of the amplifier to speakers (+) tab. Connect one end of the black wire (-) to the other tab. Connect each speaker to make sure that is not (+,-) inverted polarity. If the polarity of the speakers is reversed, the sound will be unnatural and will play without bass.
2. There will be a prompt sound when BT is connected.
3. Since there is no priority set in audio input, please don’t use BT and line in inputs simultaneously, otherwise sound is mixed.

Stereo Connection

Rear Panel Specification

1. Aux Input
2. RCA Input
3. Balance Input
4. Loop Output
5. Sub Output
6. Speaker Output
7. LED Indicator
8. Treble Adjustment
9. Bass Adjustment
10. Volume Control
11. Power Switch
12. AC Power Cord

Remark

4. LOOP: Signal output, connect to active amplifiers.
5. SUB: Bass output, connect to active amplifiers (SUB amplifier is better).
6. Speaker Output: Connect to passive speakers.
7. LED Indicator: During power ON mode, light is constant blue color; During power AUTO mode, lights goes off when there is no signal input and it turns to blue color when signal comes.
8. Power switch: When this switch is on Auto position, the amplifier will automatically turn on when a signal is present and it will go standby when there is no signal input.

Under power Vs. Over power

1. Most speaker damage is caused by amplifiers with too little power (wattage).
2. An overdriven amplifier clips the waveforms and leads to speaker distortion.
3. Clipping is usually audible and it may vary from harsh sound to a fuzzy or unclear sound.
4. If you hear the clipping at high volume levels, turn down the volume until the distortion is gone.
5. Damage caused by operating the speakers at distorted volume levels is not covered by the warranty.

FREQUNETLY ASKED QUESTIONS

How good are Pyle Bluetooth speakers?****

The Pyle speakers are excellent for outdoor usage and are simple to erect. They are ideal for camping, trekking, fishing, and other outdoor activities because they are also quite portable. The speaker has a remote control and an integrated microphone.

Why isn’t my Bluetooth speaker pairing?****

If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range.

Can you overcharge a speaker?****

Yes, overcharging your speakers will result in irreversible harm to the rechargeable batteries.

Who is Pyle Audio made by?****

Pyle USA is an American business that focuses in selling consumer electronics and audio gear online and through big-box shops.

Why is my speaker not connecting?****

Drivers that are faulty or out of current might lead to hardware issues. Verify that your audio driver is current and update it if necessary. Attempt removing the audio driver if that doesn’t work (it will reinstall automatically).

Do speakers wear out if not used?****

Mechanical deterioration causes loudspeakers to ultimately fail, especially in the surround/suspension that joins the cone/diaphragm to the basket/housing.

Are Pyle speakers loud?****

Yes, they are pretty loud.

Why is no sound coming out of my speakers?****

Make sure the external speakers are turned on if you plan to use them. Restart the computer. Verify that the audio is not muted and is turned up using the speaker icon on the taskbar. Check to see whether the computer isn’t muted using hardware, such a laptop or keyboard with a specific mute button.

Why there is no sound from my external speakers?****

Verify that the default output is selected on the external speaker. Make sure the connections are correctly connected and the external speaker is powered.

Do I plug my speakers into line in or out?****

Connect the speaker cord to the desktop computer’s green “Line-out” port. This cable frequently has a green connection as well. Connect the speaker cord to the laptop’s headphone jack.

What is the lifespan of a speaker?****

High-quality speakers generally survive up to 40–50 years before displaying any indications of degradation, depending on the materials they are composed of and the climatic conditions where the equipment is utilized.

How can you tell if speakers are good?****

Using a multi-meter to measure them, can frequently provide findings that might lead you to believe the speaker is subpar. The most effective method of testing them is to QUIETLY put a signal through them, listen to it, and then determine whether it generates sound.

What watt of speaker is good?****

If your speakers are 90 dB efficient and you enjoy listening to loud, uncompressed music, 200 Watts should be more than plenty for you. 50 Watts is plenty if all you listen to is jazz and light classical music and you don’t expect them to shake the house. Horns and other higher efficiency speakers use relatively little power.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>