nedis ACAM51BK 4K Action Camera User Guide
- September 23, 2024
- nedis
Table of Contents
nedis ACAM51BK 4K Action Camera
Specifications :
- Recording Resolutions:
- 720p, 120 fps
- 1080p, 30 fps
- 4K, 30 fps
- Recording Time:
- 16 GB microSD:
- 720p – 95 minutes
- 1080p – 140 minutes
- 4K – 90 minutes
- 32 GB microSD:
- 720p – 180 minutes
- 1080p – 270 minutes
- 4K – 170 minutes
- 64 GB microSD:
- 720p – 340 minutes
- 1080p – 520 minutes
- 4K – 320 minutes
Product Usage Instructions
Safety Instructions:
WARNING: Insert or change memory card (image B) A microSD card (not
included) is required to store pictures or videos. Insert the microSD card
into the microSD card slot. Use a microSD card with a maximum of 64 GB storage
capacity. Format the microSD card before use. Formatting the microSD card will
remove all files from the microSD card. Make sure to back up all files you
want to keep before formatting the microSD card.
Charging the Battery :
Charge the camera using the supplied USB-C cable from any USB outlet. The
camera can be charged while recording video. Fully charging the battery takes
about 3 hours.
Attaching the Product to Accessories:
Insert the product into the waterproof housing. The product is not
waterproof without the housing. Ensure a secure attachment to clothing, action
gear, helmet, etc. Make sure the camera does not impede your movement, view,
or operation of your action gear.
Switching On and Modes :
To switch on, hold the power button for about 3 seconds until the status
indicator LED lights up blue. The camera enters video mode. Press and hold the
down button to switch between front and back displays. Use the power / mode
button to switch between different modes including Video, Picture, Slow
Motion, Playback, and Setup.
Recording and Viewing :
In video mode, press the OK button to start or stop recording. In picture
mode, press OK to take a picture. In playback mode, use buttons to navigate
through pictures and videos. Press and hold OK to delete media.
File Transfer :
Connect the product to your device using the USB-C cable to transfer files.
Alternatively, remove the microSD card and insert it into a card reader
connected to your device.
Frequently Asked Questions (FAQ):
-
Q: How do I know when the battery is fully charged?
A: The charging indicator LED will turn green when the battery is fully charged. -
Q: Can I use a microSD card larger than 64 GB?
A: No, it is recommended to use a microSD card with a maximum capacity of 64 GB.
Action cam to capture dual screen action in 4K Ultra HD
ACAM51BK
Nedis BV
De Tweeling 28, 5215 MCa ’s-Hertogenbosch The Netherlands –
service@nedis.com
Quick start guide Action cam
For more information see the extended manual online: ned.is/acam51bk
Intended use
- This product is a small and lightweight action camera that captures 4K Ultra HD images and video.
- Connect the product to the X-Sport Pro app to manage your photos, videos and settings. This product is intended for indoor and outdoor use.
- This product is intended as a recording device.
- Any modification of the product may have consequences for safety, warranty and proper functioning.
- This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
Recording time
The approximate recording time is an indication of how much video length can
be saved on the microSD card, depending on the video quality.
The maximum video length cannot be recorded on a single battery charge.
| MicroSD card | 720p, 120 fps | 1080p, 30 fps | 4K, 30 fps |
|---|---|---|---|
| 16 GB | 95 minutes | 140 minutes | 90 minutes |
| 32 GB | 180 minutes | 270 minutes | 170 minutes |
| 64 GB | 340 minutes | 520 minutes | 320 minutes |
Main parts (image A)
-
Power / Mode button
-
OK button
-
Camera lens
-
Front display
-
Back display
-
Charging indicator LED
-
Status indicator LED
-
Battery cover
-
Up button
-
Down button
-
Speaker
-
USB-C port
-
MicroSD card slot
-
MicroSD HDMI port
-
Microphone
Additional parts (not shown in illustration) -
Battery
-
Waterproof housing
-
Mounting accessories (×9)
-
Bandages
-
USB-C cable
-
3M mats
-
Tethers
-
Lens cloth
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this manual.
- Do not open the product, there are no user serviceable parts inside.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- Do not expose the product to water or moisture.
- Do not dismantle, open or shred batteries.
- Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
- In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
- Properly dispose of the empty battery.
- Seek medical advice immediately if a cell or a battery has been swallowed.
- Battery usage by children should be supervised.
- Only purchase the appropriate replacement battery from the Nedis website.
- Observe the charging terminals on the battery and the product and ensure correct use.
Insert or change memory card (image B)
A microSD card (not included) is required to store pictures or videos. Insert
the microSD card into the microSD card slot Ar.
- Use a microSD card with a maximum of 64 GB storage capacity.
- Format the microSD card before use.
Formatting the microSD card will remove all files from the microSD card. Make sure to back up all files you want to keep before formatting the microSD card.
Charging the battery (image C)
Charge the camera from any USB outlet with the supplied USB-C cable. The
camera can be charged while recording video. Fully charging the battery takes
about 3 hours.
Attaching the product to the accessories
Insert the product into the waterproof housing.
-
The product is not waterproof without the waterproof housing.
The waterproof housing Ai can be fitted with the supplied mounting accessories to your clothing, action gear, helmet, etc. -
Make sure the attachment is secure.
-
Make sure the camera does not impede your movement, view, or operation of your action gear.
Switching on the product
Hold the power button A1 for about 3 seconds until the status indicator LED A7
lights up blue. A welcome screen appears, and the camera enters video mode.
Press and hold the down button Aq to switch between the front display A4 and
back display A5.
Switching between the modes
Press the power / mode button A1 to switch between the modes of the product.
Before first use
Record pictures and video images
In video mode, press the OK button A2 to start or stop recording a video.
In picture mode, press the OK button A2 to take a picture.
View pictures and video images
- In playback mode, press the up button A9 or down button Aq to go to the next or previous picture or video.
- Press the OK button A2 to play and stop videos.
- Press and hold the OK button A2 to delete pictures or videos.
Settings menu navigation
- Press the OK button A 2 in the setup mode to enter the settings menu.
- In the settings menu:
- Press the power / mode button A 1 to select the mode tab.
- Press the up button A 9 and the down button A q to navigate between the options.
- Press the OK button A 2 to select and confirm the desired option.
- For a description of the settings menu, consult the extended manual online.
Transfer files to external device
Connect the product to your device with the USB-C cable Aa. Transfer the files
you want to save to your device.
Alternatively, remove the microSD card from the microSD card slot Ar and
insert the microSD card into a card reader that is connected to your device.
Use with X-Sport Pro App
Use the X-Sport Pro App on your mobile device to review images and videos,
transfer them to your mobile device, take pictures, record video, toggle
picture and video modes and change settings.
- The app works best with iPhone or Android version 8.0 and up.
- For more information about how the app works, consult the extended manual online.
- Switch on the product.
- Press and hold the up button A9 for 3 seconds to activate Wi-Fi.
- X-Sport Pro App
- Alternatively :
- Switch on the product.
- Press the power / mode button A1 to switch between the modes of the product.
- Press the OK button A2 in the setup mode to enter the settings menu.
- Press the power / mode button A1 to select Wi-Fi mode.
- Press the OK button A2 to activate Wi-Fi on the product.
- Install and open the X-Sport Pro app. Select Wi-Fi network X-Sport Pro. Enter password 12345678 to connect.
Once the connection is established, you see the live view of the camera. You can now control the camera with the app.
- Wi-Fi has to be switched on to use the product with the X-Sport Pro app.
- Tap the record button in the bottom to start or stop recording a video.
- Tap the camera button to take a picture.
- Tap the slow motion button to record a slow motion video.
- Tap the media gallery button in the bottom left to review, delete or download pictures and videos to your mobile device.
- Tap the settings icon in the bottom right to enter the setup menu.
View pictures and video images on external device
To view the pictures and video images on a TV or monitor without transferring
any files:
-
Plug an HDMI cable into the Micro HDMI port At.
The HDMI cable is not included. -
Plug the other end of the HDMI cable into the external device.
Switching off the product
Hold the power / mode button A1 for 3 seconds to switch off the product. When
possible, remove the battery from the product when not in use.
Replacing the battery (image D)
- Open the battery cover A8.
- Remove the empty or damaged battery.
- Place the new battery in the battery compartment.
- only purchase the appropriate replacement battery from the Nedis website.
- Close the battery cover A8.
Disposal
- The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
- For more information, contact the retailer or the local authority responsible for the waste management.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product ACAM51BK from our
brand Nedis®, produced in China, has been tested according to all relevant CE
standards and regulations and that all tests have been passed successfully.
This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via:
nedis.com/ACAM51BK#support