dormakaba 9000 Series Panic Hardware Owner’s Manual

9000 Series Panic Hardware

“`html

Product Information

The dormakaba 9000 Series Panic Hardware is a premium line of
panic hardware designed to meet high-quality standards for
durability and security. The series features solid, wrought metal
touchbars, rails, and covers made of brass, bronze, stainless
steel, and aluminum, providing an architectural finish suitable for
various conditions.

Features:

• Solid metal construction
• Available in various materials for an architectural finish
• Tested and approved to BS EN 1125 standards
• CE conformity mark
• ISO 9001 and ISO14001 certified manufacturing

Specifications:

• Chassis Material: Alloy steel with zinc dichromate finish
• Latchbolts: Stainless steel dead-locking pullman type
• End Caps: Zinc alloy die casting
• Available Variants: 9700 Panic Latch, 9800 Surface Panic Bolt,
  9600 Concealed Panic Bolt

Product Usage Instructions

Single Doors:

For single doors, choose between the Panic Latch 9700 or Surface
Panic Bolt 9800 based on your door configuration.

Double Doors:

For double doors, use the Panic Latch 9700 on the active leaf of
the pair of doors. Ensure a 320 rebate keep is required for the
9000 range of rebated doors.

Rim Panic Latch (9700 Series):

The rim panic latch is fitted to the face of the door and
engages a keeper for secure locking. Various keeper options are
available for installation.

Panic Bolt (9800 Series):

The panic bolt is fitted to the face of the door and provides
dual-point locking with a deadlocking latchbolt engaging surface or
recessed keepers in the frame head.

FAQs

Q: What standards are the dormakaba 9000 Series Panic Hardware

tested to?

A: The products are tested and approved to BS EN 1125 standards
and carry the CE conformity mark.

Q: What certifications does the manufacturing plant hold?

A: The quality-assurance system at the DORMA Group North America
plant in Illinois is certified to ISO 9001 and ISO14001.

“`

9000 Series
Panic Hardware

dormakaba

9000 Series

A complete line of panic hardware

dormakaba offers a complete line of panic hardware for virtually any egress control installation in which security, reliability and appearance are considerations. Our devices cover the full range of hardware requirements found in such places of public assembly as hospitals, universities and schools, public auditoriums, commercial buildings, hotels and municipal buildings. dormakaba offers a comprehensive line of 9000 Series narrow stile architectural touchbar devices, including concealed and surface panic bolts and rim panic latch. Each model is available with a broad range of outside operating trim and special electrical functions.
dormakaba panic hardware is manufactured to the same exacting standards for quality and workmanship that have made dormakaba door closers the leading door controls worldwide.
The 9000 Series features solid, wrought metal full length touchbars, rails and covers. The brass, bronze, stainless steel and aluminium materials provide an architectural finish that will remain attractive even in the most punishing conditions. Chassis are constructed of an alloy steel with zinc dichromate finish and stainless steel dead-locking pullman type latchbolts, while end caps are a rugged zinc alloy die casting.
Plus points
For the trade · Engineered, reliable product · Excellent value when comparing product, price and service · Handing and functions are field-changeable to minimise
inventory variants
For the installer/fabricator · Easy to install, with simple, straightforward installation
instructions and fixing templates · Versatility by field-cutting units to suit varying door widths · Minimal adjustment required at installation · Simple design requires virtually no in-service maintenance
For the architect/specifier · Covers all applications with rim panic latch, surface panic bolt
and concealed panic bolt configurations · Variety of locking options and outside operating trim · Electrical operating functions for specialised applications · Complete range of architectural finishes

Data & Features
Size AA Doors 1220 to 838mm Size BB Doors 915 to 686mm Size CC Doors 915 to 610mm Size DD Doors 410 to 610mm Door Height to 2430mm Door Height 2430 to 3050mm Door Thickness 45 to 58mm Door Thickness 58 to 101mm Site Reversible Handing Hex Key Dogging Cylinder Dogging Deadlocking Top Pullman Latch Bottom Round Slide Bolt Bottom Pullman Latch Electronic Bolt Retraction Monitor Switch in Touchbar Battery Powered Exit Alarm Direct Wired Exit Alarm Outside Operating Trim CE Marked to BS EN1125 CERTIFIRE Approved for Timber and Metal Doors CF875 Anti-corrosion Anti-bacterial Coating
yes – no optional

9700 Panic Latch

9800 Surface Panic Bolt

9600 Concealed Panic Bolt

–

–

–

–

The Panic Hardware products in the dormakaba 9000 series have been tested and approved to BS EN 1125 and carry the CE conformity mark in accordance with supplement ZA to that standard.

For the user · Durable finishes are long lasting · Few, but easily replaced, parts for continued service · Life-cycle tested to guarantee on-going performance

The quality-assurance system at the DORMA Group North America, Steeleville, Illinois, U.S.A. plant is certified to ISO 9001 and ISO14001

General Information · Full door-width touchbar and rail, chassis and latchbolt covers are
fabricated from brass, bronze, aluminium or stainless st · Die-cast end cap for touchbar assembly finished in comparable
electro-plated finish · All devices easily field-reversible · Fasteners provided for metal and wood door applications

2

Maximum and minimum fixing centres in mm

AA

AA

1153 BB

762 BB

848

609

CC

CC

848 DD

535 DD

559

356

Single doors

Panic XhXarXdXwXaXrXe

Latch 9700

Bolt 9800

Concealed Bolt
9600

Double doors

Rebated pair

Latch 9700

Bolt 9800

A 320 rebate keep is required for the 9000 range of rebated doors.

Flush pair

Bolt 9800

Bolt 9800

Latch 9700

Concealed Bolt
9600

Concealed Bolt
9600

Concealed Bolt
9600

3

dormakaba

9000 Series

9700 Series

The 9700 Series is a rim panic latch fitted completely to the face of the door. The 19mm dead-locking latchbolt engages a keeper, normally surface applied to the frame (recessed keeper also available). This provides simple installation, yet secure locking of the door.

Specifications
· Size “AA” device fits 1220mm wide door, can be cut to door 838mm wide on site.
· Size “CC” device fits 915mm wide door, can be cut to door 610mm wide on site.
· Size “DD” device fits 610mm wide door, can be cut to door 410mm wide on site.
· Hex key dogging standard, cylinder dogging optional, specify suffix “CD”. CD option requires American mortice cylinder, not included.
· Where dogging is not desired, specify suffix “LD”.
·
·
·
·
·
·
·

AD416 Standard Keeper

AD486 Roller Keeper

AD463 Oversize Extended Lip Keeper (Default keep for 9700 series)

AD425 Recessed Keeper with Lip

AD320 Oversize Keeper for Panic Latch on Active Leaf of Pair of Doors

4

Rim panic latch

LHR

Based on 13mm blade stop “cut out”; If using trim dimensions may vary. See proper device and trim templates.

9700 Rim RHR

9800 Vertical rod LHR
Edge guard

Edge of stop or mullion

35mm Standard #430 strike 38mm For #463 or #486 strike

70mm

Vertical ref.

22mm For #443 strike
CL Vertical reference line

13mm Outside edge

320 Strike

Backset or vertical reference is measured from outer edge of door as shown. Minimum stile is less glass stop.

Vert. ref.

Vert. ref.

Min. Stile

Min. Stile

Rounded edge door Beveled edge door

Type of installation

Minimum vertical ref. of chassi s

Single door 13mm blade stop
Pairs and double egress

35mm 32mm

Minimum Stile Pull only “Z” trim 51mm 56mm
41mm 54mm

5

dormakaba

9000 Series

9800 Series

The 9800 Series is a panic bolt fitted completely to the face of the door. The 19mm deadlocking, Pullman type latchbolt engages surface or recessed keepers in the frame head and a 12mm slide bolt engages in the floor, providing secure dual-point locking of the door.
Specifications
Size “AA” device fits 1220mm wide door, can be cut to door 838mm wide on site.
Size “CC” device fits 915mm wide door, can be cut to door 610mm wide on site.
Size “DD” device fits 610mm wide door, can be cut to door 410mm wide on site.
Standard device fits doors up to 2430mm high, specify extended rods “ETR” for doors 2430mm to 3050mm high.
Hex key dogging standard, cylinder dogging optional, specify suffix “CD”. CD option requires American mortice cylinder, not included (no dogging available on size DD bars).
Where dogging is not desired, specify suffix “LD”.
Devices are handed but easily field-reversible.

AD426 Standard Top Keeper (Default keep for 9800 series)
AD426A Top Keeper with Angle
AD416 Surface Mounted Bottom Keeper

AD431 Recessed Bottom Keeper) 25mm
19mm
19mm AD439 Slide Blot Bottom Keeper (Default keep for 9800 series)

6

3mm

B

Minimum

Stile

A

Backset

Pair of vertical rods

Type of installation

Minimum vertical ref. of chassis

Single door 13mm blade stop

35mm

Minimum Stile Pull only “Z” trim
51mm 56mm

Pairs and double egress

32mm 41mm 54mm

Paired with 9700 rim

41mm 56mm 64mm

9700 Rim RHR

9800 Vertical rod LHR

70mm

Vertical ref.
13mm Outside edge 320 Strike

Surface panic bolt

7

dormakaba

9000 Series

9600 series

The 9600 Series is a panic bolt concealed in the lock stile of the door, providing improved aesthetic appeal. The touchbar assembly is fitted to the face of the door. The 19mm deadlocking pullman type latchbolt engages keepers recessed in the frame head and a 12mm slide bolt engages in the floor, providing secure dual-point locking of the door.
Specifications
Size “AA” device fits 1220mm wide door, can be cut to door 838mm wide on site.
Size “CC” device fits 915mm wide door, can be cut to door 610mm wide on site.
Size “DD” device fits 610mm wide door, can be cut to door 410mm wide on site.
Standard device fits doors up to 2430mm high, specify extended rods “ETR” for doors 2430mm to 3050mm high.
Hex key dogging standard, cylinder dogging optional, specify suffix “CD”. CD option requires American mortice cylinder, not included (no dogging available on size DD bars).
Where dogging is not desired, specify suffix “LD”.
Devices are handed but easily field-reversible.

AD418 Standard Top Keeper (Default keep for 9600 series)
AD431 Recessed Bottom Keeper 25mm 19mm 19mm
AD439 Slide Bolt Bottom Keeper (Default keep for 9600 series)

8

Concealed panic bolt

Backset or vertical reference is measured from outer edge outer edge of door as shown. Minimum stile is less glass stop.

Vert. ref.

Vert. ref.

Typical pair of doors

Min. Stile

Min. Stile

Rounded edge door Beveled edge door

Note: On narrow stile, vertical center line of chassis may not be on same center line as latch.

Type of installation

Minimum vertical ref. of chassis

Single door 13mm blade stop
Pairs and double egress

32mm 32mm

Minimum Stile Pull only “Z” trim 52mm 59mm 51mm 54mm

CL 26mm Latch Narrow stile
10mm 3mm Top of Door
“Cutout” Top of door only.

Latch case prep (Top & Bottom)

19mm

37mm 22mm

38mm 84mm 5.5

CL Latch & chassis

51mm Minimum

38mm

29mm

19mm

CL Latch 22mm

5.5mm Dia. hole 82 degree countersink 11mm
to 10mm dia. (2) places

19mm 38mm
73mm

M5 Tap 3mm Pilot for timber door (6)

Panic device (metal and timber door)

Panic device (aluminum door)

9

dormakaba

9000 Series

Optional electric functions

Motorised Latch Retraction Specify suffix MLR
A motor concealed in the touchbar provides instantaneous retraction of the latchbolt to provide access from the secure side of the door. Remote control can be accomplished with switching devices such as key switches, card readers etc. that provide a normally open or closed electrical contact. The MLR unit can also be used for electronically dogging the bar open.
For Automatic functions, the 9000 MLR device can be paired on an opening with dormakaba ED100 and ED250 automatic operators.
Because of its’ low amperage draw (under 1 A), the MLR feature can be powered by a DORMA ED100 or ED250 automatic operator thus removing the need for a separate power supply unit.
Technical Data
Motor rated at 1 A 24 VDC
When activated drawing in touchbar: 0.88 A
Electric dogging continuous 0.4 A

· Size “AA” device fits 1220mm wide door, can be cut to door 838mm wide on site
· Size “CC” device fits 915mm wide door, can be cut to door 610mm wide on site
Monitor Switch Specify suffix MS. A micro switch in the touchbar assembly which provides local and/or remote notification when the touchbar is depressed. 2 single pole double throw switches, 0.50 Amp 28VDC.
Latch Monitor Specify suffix LM. A micro switch attached to the device chassis on 9000 Series units only, provides local and/or remote notification of movement of the panic bolt rods and latchbolt without depressing the touchbar.

40PSU9000MLR Power supply
The 40PSU9000MLR Power Supply has an inbuilt timer module and is capable of powering and controlling 2no. 9000 Series Panic Devices with MLR Motorised Latch Retraction. Input 230VAC +10%-15% 500mA Output Current 4A Output Voltage 24-26VDC
· Minimum recommended wire size is 18#GA (1.02mm). Terminals will handle up to 12#GA (2.05mm)
· Maximum wire run distance is 30m between device and ADPS501 power supply with 12#GA wire
· Maximum wire length from power supply to device and back in metres/wire gauge

18#GA = 7.5m, 16#GA = 15m, 14#GA =22.5m, 12#GA = 30m

1.02mm

1.29mm

1.63mm

2.05mm

Battery alarm panic device

9000 Series panic devices are available in an integral battery powered alarm configuration. The 90 decibel alarm contained in the panic device touchbar and rail assembly activates when the touchbar is depressed and sounds continuously until the battery is completely discharged. Alternatively, a factory-furnished option allows the alarm to sound for four minutes, then automatically re-arms.
Furnished with and controlled by a lock cylinder and key, the unit allows ten seconds to exit through the door after arming the alarm, indicated by an intermittently flashing red L.E.D. light in the touchbar. A yellow L.E.D. in the touchbar will flash, until manually reset by key, to indicate an unauthorised exit even if the alarm has automatically reset.
The unit is furnished with a 9-Volt, industrial grade battery concealed in the end cap assembly for easy replacement. A tamper-proof switch will activate the alarm if unauthorised removal of the battery is attempted. An option for 12- or 24-Volt direct power wiring is available.

· Specify suffix “BPA” to 9000 Series model number for Battery Alarm Device
· Specify suffix “BPAR” for 4 minute auto reset Battery Alarm Device
· Specify suffix “DWA” for direct hard-wired option · Size “AA” device fits 1220mm wide door, can be cut to
door 864mm wide on site · Size “BB” device fits 915mm wide door, can be cut to door
712mm wide on site
Battery alarm device

10

Outside entry functions and key operated trims

Outside entry functions and key operated trims
9000 Series panic devices are available with a variety of outside entry functions and operating trim. Specific type cylinder requirement varies by the function selected. Refer to the details specified with each trim and function outlined below. Cylinders are not included.

ZP11/ZP12

79mm 79mm
216mm

41mm
Function 11-Entrance by thumbturn and pull ­ Key locks or unlocks thumbturn. Function 12-Entrance by thumbturn and pull only when released by key ­ Key removable only when locked.

ZK08/ZK09

87mm

216mm
41mm
Function 08-Lockable Knob ­ Key locks or unlocks knob which retracts latchbolt. Function 09-Lockable Knob ­ Same as 08 function but key removable only when locked.

ZK23
87mm
216mm 41mm
Function 23-Active Knob ­ Knob retracts latchbolt, always unlocked.

ZO11/Z012

44mm

216mm
41mm
Function 11-Entrance by thumbturn and pull ­ Key locks or unlocks thumbturn. Function 12-Entrance by thumbturn and pull only when released by key ­ Key removable only when locked.
ZT08/ZT09
90mm
216mm
41mm
Function 08-Lockable Lever ­ Key locks or unlocks lever which retracts latchbolt. Function 09-Lockable Lever ­ Same as 08 function but key removable only when locked. Note: Both 08 and 09 functions are provided with each knob or lever set and the choice of function is determined at installation by assembling the appropriate locking tab on the trim.
ZT23
90mm
216mm
41mm
Function 23-Active Lever ­ Lever retracts latchbolt, always unlocked.
11

dormakaba

9000 Series

Outside entry functions and pushbutton operated trims

9000 Series panic devices are available with a variety of outside entry functions and operating trim, including knob and lever sets. Mechanical and electronic pushbutton locks eliminate problems and costs associated with issuing, controlling, and collecting keys and cards. Please note that for pushbutton locks, the 9300 series wide stile exit devices are required.

PowerPlex 2000

E-Plex 2000

8 15/16″ (227 mm)

8 15/16″ (227 mm)

3 5/16″ (84 mm)

2 13/16″ (71 mm)

Exterior access by Valid pin code, while allowing free egress. Up to 100 access pin codes programmed via keypad or with optional Microsoft Excel-based software. Non-handed, Self powered (environmentally friendly), key override. CE marked to EN1125 with exit devices 9300

PowerPlex based on the PowerStar technology, utilizes new capacitor technology to store power longer and more efficiently, pressing the first button of your code wakes up the lock.

· No batteries to replace saves money and helps the environment · Provides lower cost of ownership- no ongoing costs · Easy to install,use and maintain

3 5/16″ (84 mm)

2 13/16″ (71 mm)

Exterior access by Valid pin code, while allowing free egress. Up to 100 access pin codes programmed via keypad or with optional Microsoft Excel-based software. Non-handed, Battery powered, key override. CE marked to EN1125 with exit devices 9300

Simplex 5000

8 ” (225 mm)

Wide stile exit devices

(68)
Panic latch 9300

(70)

(216)

(70)

3 ” (86 mm)

3 3 / 16″ (97 mm)

Exterior access by Valid pin code, while allowing free egress. One access pin code programmed via keypad. Non-handed, mechanical lock, key override. CE marked to EN1125 with exit devices 9300

Edge of Door Vertical Reference
(71)

(108)

Minimum Stile

12

TGD glass kits
· Suitable for 10-15mm thick Glass · Stainless Steel Finish Only · 9800TGDZODT630 Stainless Steel Glass Door Kit with ZODT Blank External Plate For external operation add · ZT08630TGD Stainless Steel Lever Handle for Glass Doors · ZK08630TGD Stainless Steel Knob for Glass Doors
Glass patch fitting parts

Tgd glass kits

Outside cover
Outside patch itting

Gaskets Inside patch itting

Glass bushings

Inside cover

Outside cover

Gaskets

Top bolt patch itting assembly, mounting screws provided with patch itting.

Outside

Glass

patch itting bushings

Inside patch itting
Inside cover

Gaskets

End cap itting assembly, mounting, screws provided with patch itting.

Chassis spacer
Glass bushings
Chassis patch itting assembly mounting screws provided with chassis assembly outside trim required.

Outside cover
Outside patch itting

Gaskets Inside patch itting

Glass bushings

Inside cover

Bottom bolt patch itting assembly, mounting Screws provided with patch itting.

Keeper Fitting PT30SPL Used when the opening has a glass transom above the door. (optional)

Keeper

Stop

Note: Patch itting torque of no more than 12Nm for attachment to glass door.

13

dormakaba

9000 Series

Glass preparation

53.5mm 45mm
70mm

20mm 2 Places

3 mm

1106 mm 1011 mm
915 mm 45 mm 37 mm

16 mm 3 Places

36.5mm

22.5mm 45 mm
20 mm 2 Places

20 mm 2 Places

Finished floor or threshold
6 mm

No increased backset

14

Glass preparation with PT30SPL

Tgd glass kits

R80 mm 37 mm 53.5 mm
45 mm
135 mm

161 mm 148 mm

R55 mm

68 mm

36 mm

20 mm
20 mm 2 Places

3 mm

1106 mm 1011 mm
915 mm 45 mm 37 mm

16 mm 3 Places
20 mm 2 Places

No increased backset

36.5 mm

22.5 mm 45mm
20 mm 2 Places

Finished floor or threshold
6mm

15

dormakaba

9000 Series

Specifications
9700 rim panic latch with heavy duty, full door width touchbar, deadlocking stainless steel latchbolt, and hex key dogging.
9800 surface panic bolt with heavy duty, full door width touchbar, top deadlocking pullman type latchbolt, bottom slide bolt, and hex key dogging.
9600 concealed panic bolt with heavy duty full door width touchbar, top deadlocking pullman type latchbolt, bottom slide bolt, and hex key dogging.
9300 wide stile rim panic latch with heavy duty, full door width touchbar, deadlocking stainless steel latchbolt, and hex key dogging. Wide stile for use with pushbutton operating trims.

Options CD Cylinder Dogging LD Less Dogging ES Electric Latchbolt Retraction MS Monitor Switch in Touchbar LM Latchbolt Monitor BPAR Battery Alarm Device (time-limited alarm)

BPA Battery Alarm Device (continuous alarm)
DWA Battery Alarm Device (direct wired)
P Clear Powder Coat (anti-corrosive)
M Anti-microbial Protected Coating

Finishes description

9000 series panic device and outside trim

Standard finishes

Designation

Panic Device

605

Polished, lacquered brass

625

Polished chrome

630

Satin stainless steel

Optional finishes
Designation 606 611 612 613

Panic Device Satin, lacquered brass Polished, lacquered brass Satin, lacquered bronze Satin, dark oxidised, oil rubbed bronze

Outside Trim Polished, lacquered brass Polished chrome Knob/Lever: Satin stainless steel Escutcheon: Satin nickel
Outside Trim Satin, lacquered brass Polished bronze Satin bronze Satin, dark oxidised, oil rubbed bronze

Keypad locking trim finishes

PowerPlex 2000 series
606 Satin brass (04) Housings and levers 626 Satin Chrome (26D) Housings and levers

E-Plex 2000 series
606 Satin brass (04) Housings and levers 626 Satin Chrome (26D) Housings and levers 744 Dark Bronze (10B) Levers with brass accents

5000 series
Standard finishes
Designation 626 676
Optional finishes
Designation 605 606 625 744

Panic Device Satin Chrome (26D) Black housings with Satin Chrome 626 (26D)

Outside Trim Housings and levers Levers and accents

Panic Device Bright Brass (03) Satin brass (04) Bright Chrome (026) Dark Bronze

Outside Trim Housings and levers Housings and levers Housings and levers Housings and levers

16

Notes
Notes
17

dormakaba
Notes

9000 Series

18

Notes
Notes
19

www.dormakaba.co.uk

dormakaba UK & Ireland
E: info.gb@dormakaba.com
Wilbury Way, Hitchin Hertfordshire SG4 0AB T: +44(0)1462 477600 F: +44(0)1462 477601
Lower Moor Way Tiverton, Devon EX16 6SS T: +44(0)870 000 5625 F: +44(0)870 000 5397

Subject to change without notice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>