dormakaba PL76 Mechanical Locks User Guide

dormakaba PL76 Mechanical Locks

Product Information

Specifications

• Product: Simplex Mechanical Locks
• Region: United States
• Catalog Number: PL76
• Date: January 2024

Product Usage Instructions

• Site Requirements
  The installation of the Simplex Mechanical Locks should be performed during normal business hours unless otherwise negotiated. The installation process is based on acceptable site conditions where other dependent scopes have been completed.

• Ownership of Inventions
  All rights to drawings, designs, and confidential information disclosed by the Seller remain the property of the Seller. The Buyer shall not claim ownership or rights to any information provided by the Seller.

• Lead Times
  Lead times are based on standard factory requirements to provide materials. Estimated ship dates will be provided once the order is confirmed. Adequate packaging will be ensured for safe shipping.

• Payments
  All Seller’s invoices are payable within thirty days of the date of issuance. Interest on past due amounts will be charged at a rate of 2% per month or the maximum allowable by law.

• Cancellation Policy
  Cancellation of orders is subject to restocking fees, cancellation fees, and costs incurred. The standard cancellation policy states a 20% charge if no materials have been ordered.
  

• Insolvency
  Seller reserves the right to suspend performance or require payment in cash if Buyer’s financial condition raises concerns.

FAQ

• Q: What should I do if I need support for Simplex Mechanical Pushbutton Locks?
  A: Parts will be available while supplies last, and support will be provided for the foreseeable future.

• Q: What happens if I cancel my Purchase Order?
  A: Cancellation is subject to restocking fees, cancellation fees, and costs incurred. Standard cancellation is 20% of the order if no materials have been ordered.

• Q: How are lead times calculated?
  A: Lead times are based on factory requirements and estimated ship dates will be provided once the order is confirmed.

What’s New
This price book dated January 2024 contains updated product and pricing information. All changes are listed below and take effect January 2, 2024.

Simplex Mechanical Pushbutton Locks

• Simplex price increase (4% average)
• Simplex 8100 removed 6 Antique Brass mortise assembly & strike plate finish options
• Simplex LD 450 and LD 470 are now discontinued. See Simplex 6200 or Simplex 7100

Parts will remain available while supplies last. Support will be available for the foreseeable future.

General information

Terms and conditions of sale
Acceptance. The following Terms and Conditions of sale apply to all Quotations, Contract, Purchase Orders, Order Acknowledgement Forms, and sales of Seller’s services and products, and are the only applicable terms and conditions thereto, except for terms establishing prices, quantities, delivery schedules, terms of payment, invoicing, shipping instructions, and the identification of the products associated with each transaction. If any conflict exists between the Terms and Conditions and a Quotation, Purchase Order, Order Acknowledgment form, or sale, these Terms and Conditions shall prevail BY REQUESTING A QUOTATION OF ORDERING ANY PRODUCTS OR SERVICES FROM the SELLER, The buyer agrees TO ALL THE TERMS AND CONDITIONS. If a written contract signed by both parties is in existence covering the sale of the goods and services, the terms and conditions of the contract shall control to the extent they are inconsistent with these Terms and Conditions.

1. Order Procedure. Buyer may or may not request the preparation of a Quotation before ordering any products or services from Seller. The buyer then shall place a Purchase Order with the Seller. By placing a Purchase Order, Buyer makes an offer to purchase products or services from Seller under these Terms and Conditions. Seller, in its discretion, may accept or reject the Purchase Order. If Seller accepts the Purchase Order, Seller shall issue an Order Acknowledgement Form confirming Buyer’s order. No Purchase Order is binding on Seller unless accepted by Seller as provided in these Terms and Conditions.

2. Quotations. All Quotations by Seller are subject to change or withdrawal without prior notice to Buyer unless otherwise specifically stated in the Quotation. Quotation prices are valid on Purchase Orders placed within 90 days of the quote being issued, unless otherwise specifically stated in the quotation. If no order is placed within the stated time frame, prices may be adjusted to reflect the then-current published prices, surcharges, escalators, or another pricing adjustment due to, among other things, costs of materials, labour, transportation, taxes, duties, and other cost increases to Seller. All resulting Purchase Orders become effective only if and when approved and accepted in writing by Seller by the issuance of its Order Acknowledgement Form. Seller reserves the right to discontinue the manufacture of any products or change product materials, design, or specifications without notice.
   Quotation prices are valid on Purchase Orders placed within 90 days of the quote being issued, unless otherwise specifically stated in this quotation. If no order is placed within the stated time frame, prices may be adjusted to reflect the then-current published prices, surcharges, escalators, or another pricing adjustment due to, among other things, costs of materials, labour, transportation, taxes, duties, and other cost increases to Seller. All resulting Purchase Orders become effective only if and when approved and accepted in writing by Seller by the issuance of its Order Acknowledgement Form. All Quotations and resulting orders are subject to Seller’s Terms and Conditions outlined in the price book.

3. Site Requirements.

   • The Quotation is contingent upon all work being performed during normal business hours unless otherwise negotiated and a mutually agreeable schedule. The Quotation is calculated on one continuous installation engagement based on acceptable site conditions where other dependent scopes have completed preparation for proposed materials (i.e. electrical work,
     floor work, adjacent construction). When the Buyer has given authorization for work to begin, no other scopes may impede the Seller’s ability to complete installation in the agreed-upon area. Seller reserves the right to invoice for costs that are incurred due to unacceptable site conditions or delays by others resulting in additional installation visits.

   • Signed acceptance by the Buyer of shop drawings and/or submittals shall be interpreted as acceptance that the proposed scope is the correct interpretation of construction documents. Any field verification and/or work required by others as detailed in the submittal will be provided and coordinated by the Buyer. Work shall not begin nor shall orders be placed for any projects until all shop drawings and submittals have been approved in writing by the Buyer.

4. Warranty. Seller warrants only that all products sold under a Quotation or Purchase Order will conform to the description in the Price Book and will be free from defects in workmanship and materials. The duration of each product warranty is dependent on the particular product. Refer to
   EAD & DHW warranty statement. Extended warranties may be available for an additional cost. Seller is not responsible
   for defects or damages caused by wear and tear, consumable materials, vandalism, fires, storms, floods, acts of God, misuse, abuse or alteration by any company other than Seller. Seller further warrants that Buyer will receive good and valid title
   to the products. Any claim on account of nonconforming or defective products or for any other cause whatsoever shall conclusively be deemed waived by Buyer unless written notice thereof is given to Seller promptly after discovery but no later than sixty (60) days from the date of shipment. Seller shall have the right either to replace or repair any nonconforming or defective products, to refund the purchase price upon return of the products, or to grant a reasonable allowance on account of such nonconformance or defect Seller’s liability and Buyer’s exclusive remedy for nonconforming or defective products shall be limited solely to replacement, repair, refund, or allowance as Seller may elect. Seller shall be given reasonable opportunity to investigate all claims and no materials shall be returned to Seller until after inspection and approval by Seller and receipt by Buyer of written shipping instructions from Seller. Buyer acknowledges and agrees that the remedies outlined in this paragraph are Buyer’s exclusive remedies for the delivery of nonconforming or defective products.
   Additional Warranties

   • No credit will be provided for any work completed by others during the warranty term.
   • Warranty work will be performed during normal business hours with our standard response times. Any warranty work taking place beyond normal business hours or with expedited response time may be billable.
   • Products repaired or replaced under the warranty are warranted only through the remainder of the original warranty period.
     DISCLAIMER OF FURTHER WARRANTIES. EXCEPT AS SET FORTH ABOVE, THERE IS NO WARRANTY, REPRESENTATION, OR CONDITION OF ANY KIND, EXPRESS OR IMPLIED (INCLUDING NO WARRANTY OF MERCHANTABILITY OR FITNESS OF THE PRODUCTS FOR ANY USE CONTEMPLATED BY BUYER) CONCERNING SELLER’S PRODUCTS OR SERVICES AND NONE SHALL BE IMPLIED BY LAW.

5. LIMITATION OF LIABILITY AND REMEDIES. SELLER SHALL NOT BE LIABLE, AND BUYER WAIVES ALL CLAIMS AGAINST SELLER FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES AND PROFITS EVEN IF SELLER HAS
   BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BUYER’S EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION UNDER THESE TERMS AND CONDITIONS IS A CLAIM FOR DAMAGES AND IN NO EVENT WILL DAMAGES OR ANY OTHER RECOVERY OF ANY KIND AGAINST SELLER EXCEED THE PURCHASE PRICE OF THE SPECIFIC PRODUCTS OR SERVICES AS TO WHICH THE CLAIM IS MADE. SELLER WILL NOT BE LIABLE TO BUYER FOR ANY LOSS, DAMAGE, OR INJURY TO PERSONS OR PROPERTY RESULTING FROM THE HANDLING, STORAGE, TRANSPORTATION, RESALE, OR USE OF THE PRODUCTS IN MANUFACTURING PROCESSES, OR IN COMBINATION WITH OTHER SUBSTANCES, OR OTHERWISE.

6. Intellectual Property Indemnification. (a) Seller agrees to defend, indemnify and hold Buyer harmless against any claims, costs, damages, liability and expenses resulting from actual
   or alleged patent, trademark, or copyright infringement, misappropriation of confidential information, or violation of any other intellectual property right, domestic or foreign, in the selling or use of any part or product that is owned by Seller and that pertains to the subject matter of a Quotation, Purchase Order, or sale of products or services (provided that the product is not modified in any way by Buyer or any other party and that the product is used in the manner intended by Seller). If a suit or claim results in any injunction or any other order that would prevent Seller from supplying any product falling under a Quotation, Purchase Order, or sale, or if the result of such a suit or claim would, in the reasonable opinion of Seller, otherwise cause Seller to be unable to supply such products, Seller shall have the right, at its option, if it so chooses, to do one or more of the following: (i) secure an appropriate license to permit Seller to continue supplying the products to Buyer; (ii) modify the relevant product so that it becomes non- infringing, provided that any modification does not cause any material change to the operation or performance of the product; or (iii) replace the relevant product with a non-infringing but practically equivalent product. (b) Buyer agrees to defend, indemnify, and hold Seller harmless against any claims, costs, damages, liability and expenses resulting from actual or alleged patent, trademark, or copyright infringement, misappropriation of confidential information, or violation of any other intellectual property right, domestic or foreign, in the making, using or selling of any product or using any process that is owned by Buyer or is designed or specified by Buyer and that pertains to the subject matter of a Quotation, Purchase Order, or sale.

7. Ownership of Inventions. All drawings, know-how, designs, confidential information, and the like disclosed to Buyer by Seller and all rights therein will remain the property of Seller. Buyer shall have no claim to, ownership interest in, no license to, or no rights to any information provided or communicated by Seller.

8. Lead Times. If applicable, lead times are based on standard requirements by the factory to provide the materials proposed. Ship dates will be provided as estimates only once the order is placed with the factory. Adequate packaging will be provided for any normal shipping circumstance such that materials will be protected and labelled as required. Special packaging may be provided for an additional expense. Shipping will be cost-effective unless expedited fees are accepted by the Buyer. If materials are to be provided to the job site or Buyer location, the Seller will make
   an informed decision as to the best instruction to provide the shipping company. If materials are not required to have direct delivery, materials will be brought to the branch for pickup by the Buyer. All freight terms shall be FOB. Any claims for damage in transit or lost freight, receiving, and inspection of materials is the responsibility of the Buyer. Buyer is required to inspect and review all materials before accepting shipment.

9. Title/Risk of Loss. All products shall be shipped FOB Seller’s manufacturing facility to Buyer’s designated delivery location. Unless otherwise agreed by the parties, Seller shall select the method of and carrier for the products. Seller reserves the right to ship items in a single or multiple shipments. Title and risk of loss to products ordered pass to the Buyer upon delivery of the products to the freight carrier. Unless mutually agreed upon in writing, shipping dates are approximate and are based upon prompt receipt of all necessary information.

10. Prices. The quoted price is valid for 90 days. Seller reserves the right to revise quotations after 90 days. All accepted Purchase Orders are subject to the Seller’s price in effect at the time of shipment. Buyer shall be responsible for any increase in freight rates or transportation charges occurring after Seller prepared the Order Acknowledgment Form. on the Order Acknowledgment Form. Buyer shall pay to Seller in addition to the purchase price the amount of all fees, duties, licenses, and all sales, use, privilege, occupation, excise, or other taxes, federal, state, local, or foreign which Seller is required to pay or collect in connection with products or services sold to Buyer.

11. Payments. Unless otherwise agreed in writing between the parties, all Seller’s invoices are payable within thirty (30) days of their date. Time is of the essence. Interest on past due amounts will be assessed at the rate of 2% per month (24% per annum), or the maximum allowable by law.
    Seller reserves the right to full payment upon completion of work unless credit is pre-established. For any work requiring materials purchase or scheduling, a 50% deposit is due at the time of proposal acceptance. Twenty per cent (20%) of the Quotation, Purchase Order value may be billed after the job award. Joint check agreements may be requested at the discretion of the Seller. If payment is outstanding for any one account, work may be stopped and outstanding orders cancelled until the account is restored. Should Seller require the use of the collection, attorney’s fees, or fees for insufficient funds, Buyer agrees that these funds will be repaid to Seller. The seller retains the right to file a lien against all or part of the property being improved. The seller reserves the right to add a 2.5% charge if the invoice becomes delinquent beyond the terms.

12. Cancellation. In the event a Buyer’s Purchase Order and the issuance of an Order Acceptance Form is cancelled, it will be subject to standard 35% restocking fees, cancellation fees, engineering fees, materials & freight costs incurred, and administrative fees. Standard cancellation is 20% of the order as long as no materials have been ordered. Should the Buyer release material orders, the Buyer will be liable for that portion of the job and 20% of the remaining amount of work unperformed/unordered.

13. Storage. If applicable, Seller reserves the right to implement a storage fee if delivery is delayed after the agreed-upon date. Should the project timeline require storage of materials, the Seller reserves the right to bill for those materials at the time they have been received at a Seller location, Buyer location, or at the job site. A certificate of insurance for stored materials can be provided to the Buyer upon request. Signed acceptance by the Buyer of shop drawings and/or submittals shall be interpreted as acceptance that the proposed scope is the correct interpretation of construction documents. Any field verification and/or work required by others as detailed in the submittal will be provided and coordinated by the Buyer.

14. Insolvency. Seller may, at any time or times, suspend the performance of any order or require payment in cash, security, or other adequate assurance satisfactory to Seller when, in Seller’s opinion, the financial condition of Buyer or other grounds for insecurity, including the filing of a bankruptcy petition, warrant such action.

15. Force Majeure. Seller shall not be liable for any delay in fulfilling any order due to (a) fires, floods, strikes, or other labour disputes, accidents to machinery, acts of sabotage,
    riots, precedence or priorities granted at the request or for
    the benefit, directly or indirectly, of the federal or any state government or any subdivision or agency thereof, delays in transportation or lack of transportation facilities, restrictions imposed by federal or state legislation or rules or regulations thereunder; or (b) any cause beyond the control of Seller.

16. Ownership of Equipment. Unless otherwise agreed in writing, all material, equipment, facilities, and special tooling, which term includes but is not limited to jigs, dies, fixtures, moulds, patterns, special taps, special gauges, special test equipment, and manufacturing aids and replacements thereof, used in the manufacture of the products covered by any order shall remain the property of Seller. Any material, tooling, and equipment furnished to Seller by Buyer shall be and remain
    the personal property of Buyer with the title to and right of possession remaining in Buyer.

17. Confidential Information. All information furnished or made available by Seller to Buyer in connection with a transaction shall be held in confidence by Buyer. Buyer agrees not to use such information or disclose such information to others without Seller’s prior written consent. The obligations of this paragraph do not apply to any information which (a) at the time of disclosure was, or thereafter becomes, generally available to the public by publication or otherwise through no breach by Buyer of any obligation herein, (b) Buyer can show by written records was in Buyer’s possession before disclosure by the disclosing party, (c) is legally made available to Buyer by or through a third party having no direct or indirect confidentiality obligation to Seller concerning such information, (d) was independently developed by Buyer without use of any of Seller’s confidential information, or (e) is required to be disclosed under applicable law.

18. Waiver. No waiver by Seller of any of these Terms and Conditions shall be effective unless explicitly outlined in writing and signed by Seller. No failure to exercise, or delay in exercising, any rights, remedy, power, or privilege arising from these Terms and Conditions shall operate or be construed as
    a waiver thereof, nor shall any single or partial exercise of any right, remedy, power, or privilege hereunder preclude any other or further exercise thereof or the exercise of any other right, remedy, power or privilege.

19. Assignment. No assignment of any right or interest or delegation of any obligation or performance of Buyer under this order may be made without the prior written consent of Seller. Any attempted assignment or delegation will be wholly void and ineffective for all purposes.

20. Choice of Law. All sales, agreements for sale, offers to sell, proposals, acknowledgments and contracts of sale, including, but not limited to, Purchase Orders accepted by Seller, shall be considered a contract under the laws of the State of Delaware, and the rights and duties of all persons, and the construction and effect of all provisions hereof, shall be governed by and construed according to the laws of the State of Delaware.

21. Integration Clause. These Terms and Conditions constitute the entirety of terms and conditions, except as outlined in paragraph one, governing the sale and purchase of products and services sold by Seller. No modification of these Terms and Conditions shall be of any force or effect unless in writing and signed by Seller and Buyer. Buyer may desire to utilize its form of acknowledgment or acceptance of these Terms and Conditions. However, the use of any such form shall be for convenience only. No modification of these Terms and Conditions shall be affected by the acknowledgment or acceptance of purchase orders, shipping instruction forms, bills of lading or any other document containing terms or conditions at variance with or in addition to those set forth herein, all such varying or additional terms being hereby objected to and rejected by Seller and deemed to be waived by Buyer.

22. Installation Projects. Communication: Buyer shall communicate all of these installation terms to any end-user receiving installation services from Dormakaba. Work Execution: Any installation quote is prepared with the understanding that openings within the scope of work (“Work”) have doors and frames in good working order. dormakaba will perform the Work in the order outlined in a field survey conducted by an end-user, an end-user consultant, or a Buyer before beginning the installation. Work shall occur on weekdays during normal business hours (M- F, 8 am – 5 pm, local time). Work performed outside of normal business hours is available at a rate of 135% of the normal base rate. Any Work requested to be performed outside of normal business hours will require start and stop time confirmation with the installation site, such start and stop time to be obtained by the Buyer or the end-user. Installation Projects are performed as one continuous installation event, from commencement until the completion of the installation. Unless specifically noted otherwise in writing, there will be additional charges for delays or additional trips not caused by dormakaba. Commencement of installation is conditioned on acceptable site conditions, including the completion of dependent scopes of work (e.g., electrical work, keying meetings, distribution of credentials). When the Buyer or end-user has given authorization for work to begin, the Buyer or end-user shall ensure no other scopes may impede Dormakaba’s ability to complete installation in the agreed-upon area. dormakaba reserves the right to assess
    a fee for costs incurred due to unacceptable site conditions or delays by others resulting in additional installation visits. Union labour, prevailing wage, and certified payroll are excluded from the installation quote unless otherwise outlined in writing. Insurance certificates will be provided upon request. Coverage is limited to the types and amounts set forth on the insurance certificate. Includes execution of materials only as detailed within the proposal. Additional Charges: Additional charges may be assessed for delays or additional install time to correct any deficiencies or discrepancies between the scope of work and the actual jobsite. Any dormakaba materials delivered to the Buyer but missing from the installation site will be reordered at the customer’s expense. Any hardware changes or change orders shall be quoted on a separate proposal and timeline. Storage: dormakaba reserves the right to assess a storage fee if the Buyer or end-user causes delivery to be delayed after the agreed-upon delivery date. Should the project timeline require storage of materials after delivery to the Buyer or end-user, through no act or omission of dormakaba, dormakaba reserves the right to assess a storage fee, Buyer location, or at the job site. A certificate of insurance for stored materials can be provided to the Buyer upon request. Exclusions: Unless explicitly included in the installation quote, these are excluded: Distribution to the staff of any form of keys, fobs cards or credentials; any temporary security, barricades, or signage; all carpentry work outside of this specification including drywall, paint, framing, patching of existing holes, etc.; union labour, prevailing wage & certified payroll unless noted otherwise; permits are the responsibility of the end-user; Any special consideration for asbestos and lead paint hazards; any bonds; disposal of material and packaging; damage from negligence, vandalism or Force Majeure; cleaning of the site beyond broom clean; cost for special insurance requirements; consumable materials (e.g., batteries); any electrical work including 120v connections and low voltage wiring pulls; and other similar categories of labour and materials not included in the installation quote.

23. Installation Warranty Dormakaba will provide one (1) one-year warranty on materials to be free from manufacturer defects and on installation labour performed. Extended warranties are available for an additional cost. dormakaba is not responsible for defects or damages caused by wear and tear, consumable materials (e.g., batteries), vandalism, fires, storms, floods, acts of God, misuse, abuse, or alteration on by any company other than dormakaba. No credit will be provided for any work completed by others during the warranty term. dormakaba reserves the right to withhold the performance of warranty work if Buyer payments have become past due. Warranty work will be performed during normal business hours with our standard response times. Any warranty work taking place beyond normal business hours or with expedited response time may be billable. If Buyer, its agents, employees, successors, and/or assigns tampers with, misuses, removes any parts or adds any parts or equipment, Buyer agrees to indemnify, save and hold harmless Dormakaba, its agents, employees, successors, and/or assigns, from any liability, damages, or losses, including reasonable attorney’s fees, arising out of, or incidental to, the aforementioned conduct. dormakaba warrants that all goods manufactured by dormakaba and all services provided by dormakaba hereunder will be free from defects in workmanship and materials for twelve (12) months from the date of final project invoice to the carrier, unless sold as “With All Faults”, “Shop”, “As Is”, “As They Stand” or other similar designation. Products repaired or replaced under the warranty are warranted only through the remainder of the original warranty period.

How to Order

To order any of the products in this catalog, a part number must be provided. In most situations the part number has to be assembled to specify the desired product, as various options are available.

Door Handing

Some locks also require you to specify door handing. To determine handing, face the door from the exterior (access) side and select the corresponding diagram below.

Where to Order

Contact your local supplier or call 1.800.849.8324 or 1.336.725.1331.

For More Information
www.dormakaba.us.

The following are registered names and/or trademarks:
Abloy®, Adams Rite®, Arrow®, ASSA®, Best®, Black & Decker®, Cal Royal®, Corbin Russwin®, Detex®, Dorma®, Precision®, Kaba®, Marks®, Medeco®, Monarch®, Precision®, Sargent®, Schlage®, Simplex®, Von Duprin®, Weiser®, Yale®.

Simplex 5000 Series

Choose One Option from Each Category

Simplex 5000 Series

No Charge
 |  |
Finish Options| Description| Price
026| Bright Chrome (625)| Add $25.00
03| Bright Brass (605)| Add $25.00
04| Satin Brass (606)| Add $25.00
26D| Satin Chrome (626)| No Charge
744| Dark Bronze with Brass Accents (simulated 10B/613)| Add $100.00

Items Supplied with the Lock

• Installation Manual
• Full-Scale Template
• Required Installation Hardware
• Tailpiece for Specified Key Override

NOTES: Exit Device Compatibility

Arrow S1250                                          dormakaba 9300/F9300 Precision 21/FL21 Von Duprin 22/22F Arrow S3883F/S3800 Detex 1001 BP1                        Sargent 2828 Von Duprin 99/99F Black & Decker (K-2) QED111/112 Detex 10/F10 Series                 Sargent 3828 Von Duprin XP98/99 Cal Royal 9800 Dorex 8500R/8500F                  Sargent 8810E/8800 Yale YME2100/2100 Cal Royal 2200 Dorex 9500PR/9500FR            Sargent 8888 Yale 7100

Corbin Russwin ED5200/5200A           Monarch 18R, F18R

** Requires special K-Hub Adapter, not supplied by Dormakaba. Cannot be used with mortise design or vertical rod exit devices. Exit Devices are not included (sold separately).

ATTENTION:
Compatibility is subject to change if modifications are made by Exit Device manufacturers without dormakaba’s knowledge.

Exit Device not included (sold separately)
For mortise applications where additional door support is needed, order a mortise stabilizer for a hollow metal door from the accessories section.

Simplex 1000 Series

Choose One Option from Each Category

Simplex 1000 Series

Items Supplied with the Lock

• Installation Manual
• Full-Scale Template
• Required Installation Hardware

Notes

Medeco/ASSA/Yale/Abloy (5 and 6-pin length)
5 and 6-pin Medeco/ASSA/Abloy cylinders require a special knob spacer (included in package)

Lockout Option
This field can be left blank if no optional features are required

Knob locks are factory-handed for left-hand operation unless otherwise pre- arranged with manufacturing facility. Minimum of 50 required

Simplex L1000 Series

Choose One Option from Each Category

Simplex L1000 Series

Charge
C| LFIC, Corbin Russwin (6-pin length); core not included| No Charge
M+| LFIC, Medeco/ASSA/Yale/Abloy (5 or 6-pin length); core not included| No Charge
R| LFIC, Sargent; core not included| No Charge
S| LFIC, Schlage; core not included| No Charge
Finish Options| Description| Price
026| Bright Chrome (625)| Add $25.00
03| Bright Brass (605)| Add $25.00
05| Antique Brass (609)| No Charge
26D| Satin Chrome (626)| No Charge

Items Supplied with the Lock

• Installation Manual
• Full-Scale Template
• Required Installation Hardware

Notes

Medeco/ASSA/Yale/Abloy (5 and 6-pin length)
5 and 6-pin Medeco/ASSA/Abloy cylinders require a special knob spacer (included in package)

Privacy option is available on L*1076 only. Fits 1¾” (44 mm) doors only

Simplex EE1000 Series

Choose One Option from Each Category

Simplex EE1000 Series

Charge
C| LFIC, Corbin Russwin (6-pin length); core not included| No Charge
M ***| LFIC, Medeco/ASSA/Yale/Abloy (5 or 6-pin length); core not included| No Charge
R| LFIC, Sargent; core not included| No Charge
S| LFIC, Schlage; core not included| No Charge
Finish Options| Description| Price**
026| Bright Chrome (625)| Add $50.00
03| Bright Brass (605)| Add $50.00
05| Antique Brass (609)| No Charge
26D| Satin Chrome (626)| No Charge

Items Supplied with the Lock

• Installation Manual
• Full-Scale Template
• Required Installation Hardware

Notes

Medeco/ASSA/Yale/Abloy (5 and 6-pin length)
5 and 6-pin Medeco/ASSA/Abloy cylinders require a special knob spacer (included in the package)

Simplex 8100 Series

$1008.00

Choose One Option from Each Category

Charge
C| LFIC, Corbin Russwin (6-pin length); core not included| No Charge
M ***| LFIC, Medeco/ASSA/Yale/Abloy (5 or 6-pin length); core not included| No Charge
R| LFIC, Sargent; core not included| No Charge
S| LFIC, Schlage; core not included| No Charge
Finish Options| Description| Price**
026| Bright Chrome (625)| Add $25.00
03| Bright Brass (605)| Add $25.00
05| Antique Brass (609)| No Charge
26D| Satin Chrome (626)| No Charge

Items Supplied with the Lock

• Installation Manual
• Full-Scale Template
• Required Installation Hardware

Notes

Medeco/ASSA/Yale/Abloy (5 and 6-pin length)
5 and 6-pin Medeco/ASSA/Abloy cylinders require a special knob spacer (included in the package)

Simplex LP1000 Series

Choose One Option from Each Category

Charge
C| LFIC, Corbin Russwin (6-pin length); core not included| No Charge
M++| LFIC, Medeco/ASSA/Yale/Abloy (5 or 6-pin length); core not included| No Charge
R| LFIC, Sargent; core not included| No Charge
S| LFIC, Schlage; core not included| No Charge
Finish Options| Description| Price
026| Bright Chrome (625)| Add $25.00
03| Bright Brass (605)| Add $25.00
05| Antique Brass (609)| No Charge
26D| Satin Chrome (626)| No Charge

Items Supplied with the Lock

• Installation Manual
• Full-Scale Template
• Required Installation Hardware

NOTES: Exit Device Compatibility

Black & Decker (K-12) QED111/112 Dorex 9500PR/9500FR

Cal Royal 5000/F5000 Monarch XX-R, FXX-R, 18-R, F-18-R*,

dorma 9100/9300 17-R, F-17-R, XX-V, F-XX-V, 18-V*,

Detex Advantex Series 10, 20, 21, 40, 50, 51 F-18-V, F-XX-V, 11-R, 11-V

Detex 10/F10 Series Von Duprin 22, 88 NL, 98, 99 Dorex 8500R/8500F

** Requires special K-Hub Adapter, not supplied by Dormakaba. Cannot be used with mortise design or vertical rod exit devices. Exit Devices are not included (sold separately).

Simplex 2015 Series

Notes
Key override orders will consist of all locks on the order being keyed alike unless there is a specific key cut called out or the locks on the order are requested to be keyed differently.

NOTES: Exit Device Compatibility

American Device 6300 Series, 6303 Series

Corbin 21, 22, 25, 26NT, 27K, 29, 29-1⁄4, 29M2, 29-1⁄2M2, 29NTM2, 29D20, LA29, 39, 39EL, 39LLD, 390, LA39

Detex Advantex Series 10, 20, 21, 40, 50, 51 Dorex 8500R/8500F

Dorex 9500R/9500FR

Magno Krom LHR only: 500-4, 550-4, 650-4, 1500-4, 1550-4, 1650-4; RHR only: 600-3

Monarch 18RBA, 18RP, 18VP, F18RBA, F18RP, F18VP, FXXRBA, FXXRP, FXXVP, XXRBA, XXRP, XXVP Precision Hardware FL-D103; RHRB only 810-H; RH or LH: 103, R103, D203, H-203, 1103, D1203, H1203

Russwin 365, 3651⁄4, LT365, 370, 372, LA372, 375, LT375, 377, 382, 384, 385, 388, 572, 572EL, 572ELD, U572, LA572

Sargent 2813, 2804, 6804, 12-6804, 9804RHRB, 12-9804LHRB, 9898E, 9898K

Von Duprin 22 Rim, 22 Rim-F, 88 Rim, 88 Rim-F, 98 Rim, 98 Rim-F, 99 Rim, 99 Rim-F; 2227, 2227-F, 9827, 9827-F,

9847, 9847-F, 9927-F, 9947-F; Yale 1500 Series, 7000 Series

Cannot be used with surface-mounted Exit Devices with counterclockwise rotating hubs, thumb-operated Mortise design Exit Devices, or vertical rod Exit Devices

ATTENTION: Compatibility is subject to change if modifications are made by Exit Device manufacturers without Dormakaba’s knowledge Exit Device not included (sold separately)

Simplex 3000 Series

Choose One Option from Each Category

$16.00
 |  |
Finish Options| Description| Price
26D| Satin Chrome (626)| No Charge
55| Duranodic—Powder Paint (695)| No Charge

For complete installation, a housing and drive assembly are required (drive assembly sold separately)

Choose a Drive Assembly

$97.00
3020-19-41| 31⁄32″ (25 mm) Backset/Handing Left Hand or Left Hand Reverse| $97.00
3030-19-41| 1⅛” (29 mm) Backset/Handing Right Hand or Right Hand Reverse| $97.00
3040-19-41| 1⅛” (29 mm) Backset/Handing Left Hand or Left Hand Reverse| $97.00

Also accommodates equivalent 1½” (38 mm) backset.

Items Supplied with the Lock

• Installation Manual
• Full-Scale Template
• Required Installation Hardware

Note
Cylinder not included – 15/16″ length minimum – if longer cylinder is required, use of spacers may also be required.

Simplex 6200 Series

Choose One Option from Each Category

Items Supplied with the Lock

• Installation Manual
• Full-Scale Template
• Required Installation Hardware

Simplex 7100 Series

$221.00

Choose One Option from Each Category

Items Supplied with the Lock

• Installation Manual
• Full-Scale Template
• Required Installation Hardware

Notes
7106 model available as shown below:

• Black outside housing with black inside trim.
• Satin chrome outside housing with black inside trim.

7102, 7104, 7108
Black outside housing comes with satin chrome inside trim.

Simplex 900 Series

Choose One Option from This Category

$58.00
10| 1″ (25 mm) Deadbolt Latch, 1¾”–2⅛” (44 mm–54 mm) thick, key override| Add $58.00
17| ⅝” (16 mm) Deadlocking Spring Latch, flat front, 1⅜”–1½” (35 mm–38 mm) thick, latch holdback| Add $25.00
19| ⅝” (16 mm) Deadlocking Spring Latch, flat front, 1¾”–2⅛”(44 mm–54 mm) thick, latch holdback| Add $25.00
20| ⅝” (16 mm) Deadlocking Spring Latch, flat front, 1⅜”–1½” (35 mm–38 mm) thick, no latch holdback| Add $25.00
22| ⅝” (16 mm) Deadlocking Spring Latch, flat front, 1¾”–2⅛” (44 mm–54 mm) thick, no latch holdback| Add $25.00
27+| ⅝” (16 mm) Deadlocking Spring Latch, flat front, 1⅜”–1½” (35 mm–38 mm) thick| Add $114.00
29+| ⅝” (16 mm) Deadlocking Spring Latch, flat front, 1¾”–2⅛” (44 mm–54 mm) thick| Add $114.00
35| ⅝” (16 mm) Deadlocking Spring Latch, flat front,

1⅜”–1½” (35 mm–38 mm) thick, latch holdback, key override

| Add $82.00
38*| ⅝” (16 mm) Deadlocking Spring Latch, flat front, 1¾”–2⅛” (44 mm–54 mm) thick, latch holdback, key override| Add $82.00

Key override orders will consist of all locks on the order being keyed alike unless there is a specific key cut called out or the locks on the order are requested to be keyed differently (applies to key override models that call out key override.)

Simplex 900 Series

Choose up to Four Options – Insert 0 if Less than Four Options are required.

Options

Description
Substitutes a surface-mounted strike box for metal door frames in place of the standard strike box (part number 74464) (see 900 Series Accessories—Adapter Kit)

Price
Add $5.00

1

Deletes the key cylinder from key override models. Recessed escutcheon recommended for standard rim cylinder installation. Rim cylinder
2| tailpiece must be reduced in width to accommodate the tail receptacle. Specify the position of the cylinder tailpiece (vertical or horizontal) to mate with the standard size rim cylinder (not supplied).| Less $21.00
3| Substitutes a 2½” (64 mm) lever in place of the standard inside thumbturn (part number 74437) (cannot be used with option 5)| Add $32.00
4*| Master Keyed (key override models)| Add $12.00
5| Adds the panic bar release kit to a spring latch model (part number 74438) (cannot be used with option 3)| Add $34.00
6| Deletes latch holdback (935 and 938 models)| No Charge
 | Deletes the key cylinder from key override models and changes gear plate to a 100 Series. Recessed escutcheon recommended for standard|
7| width to accommodate the tail receptacle. Specify the position of the cylinder tailpiece (vertical or horizontal) to mate with the standard size rim cylinder (not supplied).| Less $21.00
8| Changes gear plate to accept a horizontal tailpiece (key override models)| No Charge
 |  |
Finish Options| Description| Price
26D| Satin Chrome (Powder Paint)| No Charge
04++| Satin Brass (Powder Paint)| No Charge
Notes|  |

• D.O.D. Compliant
• 04 Finish not available on Model 927/929
• Key override orders will consist of all locks on the order being keyed alike, unless there is a specific key cut called out or the locks on the order are requested to be keyed differently.

Simplex 9600 Series

Choose One Option from Each Category

Simplex 9600 Series

Cabinet Locks, no options available

Simplex File Guard

FG10, F2500, F2570, F2580 Series

Available in Black (B) only.

Notes

• Includes: Mounting Hardware: Notch Pins, Clevis Pins, Lock Washers, Screw Nuts, and Screws as required
• Special Lengths: Available with a minimum quantity of 12 per length; Maximum 66″, Minimum 17″
• F2576—Self-storing lock, special length has extended lead time 2.

Accessories

Simplex® 900 Series

Simplex® 1000, L1000, and 5000 Series

*Simplex® Mounts—Hardwood product demonstration mount, packaged 1 per box**

Simplex Features Comparison

Strong, Powerful Security Solutions Since 1862.

• 8100 and EE1000 series fit 1 3/4″ to 2 1/4″ door thickness
• L1076 model fits 1 3/4″ door thickness only

A Solution for Every Access Point…and Every Budget.

• 8100 and EE1000 series fit 1 3/4″ to 2 1/4″ door thickness
• L1076 model fits 1 3/4″ door thickness only

For more detailed information, please visit www.dormakaba.us.

Our Sustainability Commitment
We are committed to fostering sustainable development along our entire value chain in line with our economic, environmental and social responsibilities toward current and future generations.

dormakaba USA

• 6161 E. 75th Street Indianapolis, IN 46250
• T: 1.800.849.8324
• dormakaba.us.

dormakaba.

References

• dormakaba USA | For every place that matters

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>