dormakaba 9160-K5 Face Recognition Terminal User Manual

dormakaba 9160-K5 Face Recognition Terminal

USER MANUAL

1. Product description

1.2 Overview

Modern finish design ,8-inch LCD Touch screen . High-speed processing and a large storage capacity make the terminal a powerful range: 1:30,000 user identification is carried out in 1 second.

Technology & Function:

The dormakaba 91 60-K5 Face Recognition Terminal can be easily integrated into building structures. It has large screen ratio which supports 1:N or 1:1 face authentication .
The devices embed a web server enabling on-device enrollment, terminal configuration and transaction log retrieval. For scenarios requiring the use of contactless cards, the series also features multiple card reader or QR code reader

1.2 Technical Data

1.2.1 System
linux: gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf

1.2.2 Operating mode
Connect Discern Software for online or standalone.

1.2.3 RFID/Temperature Measurement

• RFID Reader Only(Legic&Mifare)
• RFID Reader with QR Code (Legic&Mifare)
• QR Code Only.
• Infrared Imaging Temperature Measurement Set

1.2.4 Power supply

• Rated voltage: 12V DC 1.8A

1.2.5 Inputs/outputs

• Network* 1
• USB* 1
• Tamper* 1
• Wiegand* 1
• Realy output 1 Input Single 2

1.2.6 Ambient conditions

• Operat ing temperature: -20℃ ~ + 70℃
• Relat ive humidity: 10% – 90% (non-condensing)
• Waterproof level: IP66

1.2.7 Dimensions

All dimensions in mm.

•  237mmL x 133mmW x20.8mmH
• Wall dimension drawing

Mounting dimensions of bracket without temperature measurement

Dimension drawing of module with temperature measurement

Mounting dimensions of bracket with temperature measurement

1.4 Featrue structure

1. Infrared fill light
2. RGB Camera
3. Infrared Camera
4. Indicator feedback signal
5. Infrared sensor module
6. 8 Inch Touch Screen
7. Card reading area
8. Bottom fixing screw
9. Bottom fixing screw wiring
10. Backplane fixing screw
11. Temperature measurement module

1.4 Labeling

The identification plate is located on the underside of the device.
The identification plate contains:

• Device name
• Item number
• Serial number
• Connection data (power supply)

2 Installation

2.1 Installation Lines

2.1.2 Power Supply Cable
Power is normally supplied to the 9160 terminal by the seperate power supply.
In case of long lines, the voltage drop due to line resistance will need to be considered.

2.1.2 Data lines
Recommended cable: CAT.5 or higher.
Data transmission is mainly network data transmission.

2.1.3 Connections
Recommended cable: RVVP 2* 1.0 or higher.
The following connect ions should be present at the installat ion locat ion:

• Ethernet cable, with RJ45 plug
• Power supply cable
• Lines to electric strikes and opener key.
• Lines to the Wiegand Interface

PRODUCT WIRING

Electric Lock Wiring

Note: The combination of NO and COM is normally open,while that of NC and COM is normally closed.The main equipment needs to use our power supply for independent power supply.

3. Start-up and commissioning

3.1 Start-up

Start-up and communication in regular operation are done via an Ethernet network. Power Suppply: DC12V 1.8A
The firewall configuration must therefore be adapted accordingly.
Without temperature measurement

With temperature

3.2 System Activation and login

System-specific settings, connection settings, such as assignment of a fixed IP address, can be made via the 91 60 system settings.

Activate the 91 60 system settings

1. Start the terminal.
2. If the 9160 is started for the first time, the system prompts you to activate it.
3. After the startup is complete, the main activation screen is displayed.

Step 1: The first login screen will prompt you to set the language to be used

Step 2: Set the account and password, enter the account password you need to set

Step 3: Set up network configuration

Step 4: User mode：default is Access mode. Attendance mode is currently disabled.

Management mode：
Server mode is to use software to configure the device(for example DISCERN) Standalon mode is the local configuration device
Server IP and account is the configured server connection address and account information

3.3 Device Local Management

Local Settings contain device parameters and some local configuration.

1. Personnel management
2. Logbook
3. Face Control
4. Parameter Setting
5. Peripherals
6. About

Login the 91 60:
In the upper right corner of the 91 60 screen, hold down the screen. The login screen is displayed. Enter your account and password to enter the main screen

3.3.1 Personnel management

The personnel management mainly consists of the locally add personnel photo , the local badge number and the output of Weigen number

1. The action menu is displayed after successful login and select the Personnel management

3.3.2 Logbook

Logbook mainly display local access log and system log and exception log 1.The action menu is displayed after successful login and select the Logbook

3.3.3 Face Control

Face Control is includes Face algorithm and access control interface Settings

1. The action menu is displayed after successful login and select the Face Control

Input 1: Set the door sensor fuction is enable.

Input 2 function is not available at present

Input 3 function is not available at present

3.3.4 Parameter Setting

Parameter Settings include Customer setting and Communicationsetting and Universal setting The action menu is displayed after successful login and select the Parameter Settings
3.3.4.1 Customer Parameters
3.3.4.2 Communication Settings
3.3.4.3 Universal Settings

3.3.4.1 Customer Parameters

Customer Parameters include Basic settings and Display Settings

1.The action menu is displayed after successful login and select the Parameter Settings–Customer Parameters

3.3.4.2 Communication Setting
Communication Settings mainly include IP address and communication interface server address Settings

1.The action menu is displayed after successful login and select the Parameter Settings– Commnication setting

3.3.4.2 Communication Setting
Communication Settings mainly include IP address and communication interface server address Settings
1.The action menu is displayed after successful login and select the Parameter Settings–
Commnication setting

3.3.4.3 Universal Parameters

Universal Parameters include the local language, NTP server Settings

1.The action menu is displayed after successful login and select the Parameter Settings–Universal Parameters

3.3.5 Peripherals

Peripherals mainly include how to enable and configure the temperature measurement function.

1.The action menu is displayed after successful login and select the Peripherals–Temperature Parameters

3.3.6 About
About mainly include About includes basic device information (model, serial number, and MAC address), APP update, and firmware upgrade.

3.3.6.1 Basic Device Information

Basin Device Information includes: Device model, serial number, MAC address, device version, and activation code information.

1.The action menu is displayed after successful login and select the About.

3.3.6.2 Modify activation

Use activated device purpose

1.The action menu is displayed after successful login and select the About–Modify activa

The device is delivered with an activation code. If the device does have an activation code, you need to contact the manufacturer to obtain the activation code and enter the activation code to activate the device while keeping the device connected to the Internet

3.3.6.3 Update
Update the 91 60 APP version
1.The action menu is displayed after successful login and select the About- Update

Update:

Steps to update your APP
1.Copy the attachment “xxxxx.tar.gz” to the root directory of U disk
2.Rename xxxxx.tar.gz to “update_app.tar.gz” on your USB drive
3.Insert the U disk into the USB interface of the 9160
4.Keep touching the upper right corner of 9160 to display the login interface (Enter the account and password for initializing the device for the first time)
5. About–Update

Note:You can update APP versions with interfaces (e.g. DISCERN and third-party interface software)

3.3.6.4 Firmware Upgrade

Upgrade the 91 60 firmware version

1.The action menu is displayed after successful login and select the About- Firmware Upgrade

Firmware Upgrade:

Steps to update your firmware

1. Copy the attachment “xxxxx.img” to the root directory of U disk
2. Rename xxxxx.img to “update.img” on your USB drive
3. Insert the U disk into the USB interface of the 9160
4. Keep touching the upper right corner of 9160 to display the login interface (Enter the account and password for initializing the device for the first time)
5. About–Firmware Upgrade

Note: After the firmware is updated, the device needs to be reactivated. Please back up the activation code of the device

3.3.6.4 Restore the factory

Restore factory Settings will clear the local Settings and account information

1.The action menu is displayed after successful login and select the About- Restore factory

Restore factory:

Restore factory Settings will clear all data of the 91 60, and you need to initialize the device to set the account and password of the 91 60.

3.3.6.5 Restore default

Restore Default will Clear user Settings and restore the device to factory default Settings.

1.The action menu is displayed after successful login and select the About- Restore default.

Restore default:
Restore Default Settings Clear user Settings and restore the device to factory default Settings.

4. Troubleshooting

• Discount  the  power  and  confirm  that  the  power  supply  cable  is  correctly connected (See “Wiring” above).
• Check the input voltage is sufficient (See “Specifications” above).

Auto Restart|

• Check the input voltage is sufficient (See “Specifications” above).

Cannot read card number correctly|

• Check the format setting on the controller if it is the same as the card format. Use approved card (known format and Facility Code) to test.
• Check  if the shield cable is correctly connected to Classis Ground at ONE point only.

Reader beeps but No card data info|

• Check if data 0 & data 1 cable is correctly connected (See “Wiring” above).
• Check the input voltage at the card reader end is correct (See “Specifications” above).

Specifications

• System: Linux:
  gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf

• Operating Mode: Connect Discern Software for online or standalone

• RFID/Temperature Measurement: Included

• Power Supply: Not specified

• Inputs/Outputs: Not specified

• Ambient Conditions: Not specified

• Dimensions: Details available in the user manual

FCC Statement

Any  Changes  or  modifications  not  expressly  approved  by  the  party responsible  for  compliance  could void the user’s authority to operate the equipment.
This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is subject  to  the  following  two  conditions:

(1) This device may not cause harmful interference, and
(2) This  device  must  accept  any  interference  received,  including interference  that  may  cause undesired operation.

RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirment. The device can be used in portable exposure condition without restriction.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device,  pursuant  to  part  15  of  the  FCC  Rules.  These limits  are  designed  to  provide  reasonable  protection against harmful interference in a residential installation. This equipment generates,uses  and can  radiate  radio  frequency  energy  and,  if  not  installed  and  used in  accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment  does  cause  harmful interference  to  radio  or  television  reception,  which  can  be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

FAQ

Q: What should I do if the terminal does not recognize my face?

A: If the terminal does not recognize your face, ensure that you are positioned correctly in front of the camera and that there is adequate lighting. You may also need to re-enroll your face in the system.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>