Schlage Horizon Smart Lock User Guide

Schlage Horizon Smart Lock

“`html

Specifications:

• Door Thickness: 32mm – 50mm
• Tools Required: Tape measure, Pencil, Level, Drill, Drill bit –
  10mm, Hole saw – 54mm, Screwdriver (Phillips), Spade bit – 25mm
  (timber door), Hole saw – 25mm (metal door)

Product Usage Instructions:

1. Prepare the Door:

A. Follow the Schlage Horizon template to prepare your
door.
B. Adjust the latch to the required backset position.
C. Mount the latch into position.
D. Ensure that the spindle hole is square to the door.

2. Prepare Jamb and Install Strike:

A. Install the strike and dust box.
B. Adjust the strike anti-rattle plate for a firm and sealed
door.
C. Contact a locksmith if jamb preparation is needed.

3. Handing (if required)

4. Fasten Posts:

A. Measure door thickness and choose the appropriate fixing
kit.
B. Fit the spindle, screw pins, and standoffs as per
instructions.

5. Position External Unit to the Door:

Position the external unit flush against the door with cables
through the prep hole and spindle through the latch.

6. Position Internal Unit to the Door:

A. Remove battery cover from the internal unit.
B. Connect cables ensuring excess cable is concealed inside the
door.
C. Line up spindle to the spindle hole in the unit body.
D. Affix internal and external units using mounting screws.

7. Install Batteries:

A. Insert 4x AA alkaline batteries correctly.
B. Secure the battery cover.

8. Test Latch Operation:

Test lock operation with door open:
A. Rotate external lever to ensure latch does not retract.
B. Rotate internal lever to ensure latch retracts.
Test operation using code 123456.

Pair and Program Lock:

For enhanced features, download Schlage Breeze mobile app from
Apple App Store or Google Play Store.

FAQ:

Q: Can I use zinc carbon batteries with the lock?

A: No, only use AA alkaline batteries as recommended for proper
operation.

“`

Schlage Horizon
SMART LOCK
Quick Start Guide

Parts

Box contents External lock body

Internal lock body

Adjustable deadlatch 60/70mm
Adjustable 60/70mm

Strike plate

Keys and tags

Door thickness 32mm – 50mm
Tools required Tape measure Pencil Level Drill Drill bit – 10mm Hole saw – 54mm Screwdriver (Phillips) Spade bit – 25mm (timber door) Hole saw – 25mm (metal door)

Fixing pack

Door thickness Mounting screws

32mm – 40mm

M525mm CSK screw x1 M540mm CSK screw x1

41mm-50mm

M540mm CSK screw x1 M550mm CSK screw x1

Installation fixings
7.87.860mm square shaft spindle x1 M530mm screw standoff with sliding screw x1
M530mm screw standoff x1 M535mm screw pins x2
M612mm replacement handle grub screw x2 (if needed)

For more information visit schlage.co.nz/horizon

Deadlatch fixings
M420mm screw for wooden door x4 M3.916mm screw for aluminium door x4

1

External assembly
Keypad Cylinder
Internal assembly
Battery cover Reset button

Installation
1. Prepare the door
A. Follow the Schlage Horizon template to prepare your door.
B. Adjusting the latch. Latch comes with backset in 60mm (2-3/8″) position. If required, pull latch case to extend to 70mm (2-3/4″) backset position.
C. Mount latch into position.
D. Ensure that the spindle hole is square to the door.

Ø60mm (2-3/8″)

Ø60mm (2-3/8″)

Ø70mm (2-3/4″)

Spindle hole

Ø70mm (2-3/4″)

2. Prepare jamb and install strike
A. Install strike and dust box as provided in box.
B. Adjust strike anti-rattle plate to achieve a firmly held and sealed door.
C. If jamb preparation is required, we recommend contacting a locksmith for installation.

2

3. Handing (as required)
Loosen lever retaining screw and rotate lever 180°. Then tighten lever retaining screw to secure lever. Repeat for internal unit.

4. Fasten posts cont.
B.

B.

C. x2

E. 2-3mm
F. Slides up
D.

4. Fasten posts
A. Measure door thickness and choose appropriate fixing kit for door thickness (see label on fixing packs).
B. Fit the spindle from the installation fixing pack.
C. Fit both screw pins either side of the spindle and tighten.
D. Fit lower screw standoff and tighten (D).
E. Fit screw standoff with sliding screw (E) by aligning flats under screw head with edges of slot.
F. Insert into slot and slide up. Adjust the top screw standoff to align with the top fixing hole.

5. Position external unit to the door
Position the external unit flush against the door, making sure that the cable fits through the door prep hole and the spindle and screw pins go through the latch.

3

6. Position internal unit to the door
A. Remove battery cover from the internal unit.
B. Connect the cables ensuring excess cable is concealed inside the door.
C. Line up spindle to the spindle hole in the body of the unit.
D. Affix the internal and external units using the mounting screws.

7. Install batteries
A. Install 4x AA alkaline batteries, ensuring batteries are inserted the correct way around (do not use zinc carbon batteries).
B. Secure the battery cover.

8. Test latch operation
With the door in the open position test lock operation:
A. Rotate the external lever, ensure latch does not retract.
B. Rotate the internal lever, ensure latch does retract.
Test operation using code 123456 (ignore voice prompt during test).

4

Pair and programme lock
Get mobile access with Schlage Breeze
For an enhanced experience and additional functionality, we recommend you download the Schlage Breeze mobile app from the Apple App Store or the Google Play Store.

Apple App Store

Google Play Store

Schlage Breeze app user functions
Within the Schlage Breeze app, users have access to more features than those available on the lock itself. This guide provides information on many of the features available.
Status of lock
Use the locked and unlocked icons to easily lock or unlock your door, or simply to check the status of the lock (locked or unlocked).

1. Create a user account using your email address (or login if you have an existing account).
2. Ensure Bluetooth is enabled on your phone, tap the keypad of your Schlage Horizon lock to activate it.
3. To pair the lock with the app, click on the + and follow the instructions on the app.

PIN codes
The Schlage Horizon allows you to store up to 200 PIN codes – either custom, permanent, recurring or scheduled.
Default master PIN code is 123456
Master PIN codes must contain 6-11 digits
Custom created codes can contain 4-9 digits
To add a new PIN code, use the Grant Access icon, add PIN code. For a customised PIN code, use the custom feature, add your guest’s name, and set your PIN code.
To manage your PIN codes, select Manage Access and update or delete user access as required.

5

Manual programming
IMPORTANT: Note for homeowner
Manual factory reset
If your lock was installed by someone other than yourself, we highly recommend you complete a factory reset on the lock to ensure all previously set PIN codes are successfully deleted. 1. Remove the battery cover and using a
pointed object, press the reset button for 4 seconds (refer below or to page 2 for the location of the reset button). 2. The lock will prompt to enter a setup code. At this point enter 000 on the keypad. 3. The lock will prompt that the reset procedure is complete. 4. The lock is now available to be paired with a mobile device using the Schlage Breeze app.
Battery cover

Note for installer
Administrator code set up
Once the lock is installed on the door, the lock requires the default admin code to be changed. Refer to manual lock operation on page 8 to change the default admin code and set new PIN code/s.
Once PIN code/s are set, the lock voice command will no longer prompt for the lock to be paired to a mobile device.
Note
If the lock is connected to the homeowners Schlage Breeze mobile app, then this step is not required.

Reset button

6

Manual lock operation

Follow this simple chart if you are manually programming your lock. Further lock functions are available using the Schlage Breeze app, refer to pages 5 & 6 for more information.

Change Default Admin Code

Press 1 2

Press 1 2 3 4 5 6

Press New admin code

Repeat New admin code

Press

Change Admin Code

Press 1 2

Press Admin code

Press New admin code #

Repeat New admin code

Press

Add User Code

Press 8 0

Add Key Tag

Press 8 0

Press Admin code
Press Admin code

Press New user code #
Present One or more key tag#s

Repeat New user code
Press

Press

Delete All Passwords

Press 7 1

Press Admin code

Press

Delete All Key Tags

Press 6 9

Press Admin code

Press

Hardware specifications

Item External and internal assemblies
Battery

Specifications
174mm (L) x 77mm (W) x 71mm (D)
AA alkaline battery x 4 (Operation voltage: 4.8 to 6V)

Notes
Operation temperature: -20ºC to 50ºC
Lasts 6-12 months depending on usage 6 months with Schlage Wi-Fi Bridge (BZ100)

7

Virtual keys
When you regularly need to share access to many guests, you can message them PIN code access. This is a great solution for home share properties. Select Grant Access, Invite Breeze User and enter the details for your guest. You can share this virtual key by various options including email or text message.
Key tags
The Schlage Horizon allows you to store up to 200 key tag credentials. Three key tags are provided with your Schlage Horizon lock, additional key tags can be purchased through your local door hardware retailer.
To set up your key tags, select Grant Access, Add Credential, ensure you name your key tag and complete set up of your credential.
To manage your credentials, select Manage Access and update or delete user access as required.
Auto locking
The Schlage Horizon lock default is set with a 5 second auto lock, this can be changed in the Settings, Auto Lock function by selecting a different time delay.

Passage mode
The lock can be switched to passage mode in the Schlage Breeze app within the Settings function. In this mode, the internal and external lever is unlocked, and you may enter freely. You can either set specific days/times to operate passage mode or disable this feature. When passage mode is in operation, you may still lock the unit externally by holding the key for 3 seconds. It will resume passage mode when unlocked via PIN, key tag or key override until the passage mode period completes or the feature is disabled via the Schlage Breeze app.

Clock
After installation of your lock and registering for the Schlage Breeze app, the clock is automatically set to your local time. The lock has a feature within the Settings function to change to daylight savings, if you use the scheduled PIN code feature, ensure you change to current daylight savings time to ensure the correct time is used by the lock.

Lock notifications history

To view the audit trail of when

the lock was used and by which Sarah
user, select History. This provides

information on your users,

Rachel

timing, or any attempts of adding

Rachel

incorrect PIN codes.

Mike

Grandpa
Lock sound
To enable or disable the lock sound select Settings, Lock Sound. Note, by disabling the sound, both the lock voice prompts and beeps will be disabled.

8

Schlage Horizon lock functions
Refer to the manual lock operation on page 8 for further instructions on manually programming your lock.
Tips · To activate and illuminate
the keypad, press the key. · Always press the key after
entering your PIN code.

Random PIN code
This security feature allows a user to randomly enter digits before and/or after the PIN code to prevent the user PIN code from being exposed.

Fake PIN

User PIN

User PIN

Fake PIN

Tamper alert
The Schlage Horizon lock allows for four attempts to correctly input your code, on the fifth incorrect entry the lock alarm will sound. The alarm sounds for 30 seconds, during this time you cannot continue to enter PIN codes. You can however unlock the lock through the Schlage Breeze app which will also turn the lock alarm sound off.
Low battery notification The keypad flashes to notify you when the battery is low, with a voice prompt saying, `Battery low please replace’. Also, while in the Schlage Breeze app, the app will display a low battery notification.

9

Warranty conditions
The Schlage Horizon provides a 2 year mechanical and electronic warranty.
Our goods come with guarantees that cannot be excluded under the local consumer law. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The warranty does not cover any defect or damage which may be caused or partly caused if the goods are not properly maintained, installed or are not suitable to the specified application.
Refer to our website for our finish warranty www.allegion.co.nz/finisheswarranty.

Schlage Wi-Fi Bridge (BZ100)
Empower your Schlage Horizon smart lock with Wi-Fi capability. The Schlage Wi- Fi Bridge (BZ100) pairs to your Schlage Horizon smart lock, to provide you with a real-time connection through your smartphone.
Ask your retailer about the Schlage Wi-Fi Bridge (BZ100), sold separately.

Factory default settings

Settings Master PIN code Beeper Wrong code entry limit Bluetooth mode

Factory default 123456 Enabled 5 times Enabled

Refer to page 7 for instructions on how to complete a factory reset if required.

Care and maintenance
Door furniture
At six (6) monthly intervals, the fixing screws securing the furniture to the door, both surface fix and through fix, should be checked and tightened as required. Loose fitting furniture which fails will not be covered under warranty.
All door furniture should only be wiped clean with a soft damp cloth. A non- abrasive mild household detergent may be used to remove ingrained grime.
Mortice latch
Care should be taken to ensure the internal components are kept free of dirt and filings during installation as this is the most common cause of malfunction and will not be covered under warranty.

10

For more information visit schlage.co.nz/horizon

Australia 1800 098 094 info.au@allegion.com www.allegion.com.au

New Zealand 0800 477 869 nzinfo@allegion.com www.allegion.co.nz

© 2024 Allegion

PDSC0045

References

• Allegion NZ Homepage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>