Xtreme AUTO XT-XLB71028BLK Auto LED Accent Light User Manual
- June 7, 2024
- Xtreme AUTO
Table of Contents
Xtreme AUTO XT-XLB71028BLK Auto LED Accent Light User Manual
CUSTOMIZE YOUR COLOR EXPERIENCE
855-999-8041 | www.XtremeCables.com
Remote Control
- On/Off switch
- White light (mixed color)
- Flash (flashing function)
- Strobe (slow fading out of a color)
- Fade (slow fading out with color change)
- Smooth (smooth color change)
- Control panel for color selection (12 mixed colors)
- RGB setting (red, green, blue)
- Increase/decrease the intensity of color
Installation
- Clean the surface you intend to stick the light strip to.
- Peel off the backing strip off the 3M adhesive tape.
- Press and hold the light strip firmly against the surface.
- Remove the tab from the battery compartment of the remote control.
- Plug the DC Adapter into your car’s 12V DC power socket.
Operation
- Press the power button located on the DC plug, the LED power indicator will illuminate indicating there is power to the LED Accent Light.
- Turn on the LED Accent Light by pushing the ON button on the remote control.
- Select the desired color or the desired effect and push the corresponding button on the remote control.
- Set the desired color brightness using the buttons to increase/decrease the intensity of color.
- Push the OFF button to run off the LED Accent Light.
Changing the remote control battery
The battery for the remote control has already been installed. Remove the battery pull tab to operate.
- The battery compartment is located on the narrow side of the remote control.
- Remove the empty battery and insert a 3V battery, type CR2025. The positive terminal must point upwards.
- Place the battery compartment back in the remote control so it locks in place.
Technical data
Voltage supply:
LED strips (USB): 5V
Remote Control: 3V (1 x 3V battery, type CR2025)
Output: 2.5W
Package Contents
2 RGB Color Changing LED Strips
DC Adapter
Remote
Safety and Care Instructions
- Do not attempt to disassemble the unit.
- Repairs to electrical equipment should only be performed by a qualified service person. Improper repairs may place user as risk and void warranty.
- Do not puncture or harm the exterior surface of the product in anyway.
- Do not drop or let the unit fall from high places, as doing so may damage the device.
- Do not use this unit for anything other than its intended user or purpose. Doing so may damage the device and void warranty.
- This product is not a toy. Keep out of reach of children.
- Do not expose batteries or battery pack to excessive heat or open flame.
- Do not expose the unit to extremely high or low temperatures as this will shorten the life of the device, destroy the battery, and /or distort certain parts.
- Do not use abrasive cleaning solvents to clean the unit. In order to prolong battery life, turn off when not in use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>