QNAP TS-h973AX-8G NAS Server Owner’s Manual

: September 20, 2024
: QNAP

Table of Contents

QNAP TS-h973AX-8G NAS Server
Specifications
Product Usage Instructions
Frequently Asked Questions
Warning
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QNAP TS-h973AX-8G NAS Server

Specifications

Model: TS-h973AX-8G
CPU: AMD RyzenTM Embedded V1500B 4-core/8-thread 2.2 GHz processor
CPU Architecture: 64-bit x86
Floating Point Unit: Yes
Encryption Engine: Yes (AES-NI)
System Memory: 8 GB SODIMM DDR4 (1 x 8 GB)
Maximum Memory: 64 GB (2 x 32 GB)
Memory Slot: 2 x SODIMM DDR4 Support optional ECC memory
Flash Memory: 5GB (Dual boot OS protection)
Drive Bays: 5 x 3.5-inch + 4 x 2.5-inch
Drive Compatibility:
- 3.5-inch bays: 3.5-inch SATA hard disk drives, 2.5-inch SATA solid state drives
- 2.5-inch bays: 2.5-inch SATA solid state drives, 2.5-inch U.2 NVMe PCIe Gen3 x4 solid state drives
SSD Cache Acceleration Support: Yes
Ethernet Ports: 2 x 2.5 Gigabit Ethernet Port (2.5G/1G/100M), 1 x 5 Gigabit Ethernet Port (5G/2.5G/1G/100M), Optional 10 Gigabit Ethernet Port via QNA-UC5G1T adapter
USB Ports: 1 x Type-C USB 3.2 Gen 2, 3 x Type-A USB 3.2 Gen 2
Form Factor: Tower
LED Indicators: HDD 1-5, SSD 1-4, Power/Status, LAN, USB
Buttons: Power, Reset, USB Copy
Dimensions (HxWxD): Dimensions do not include a footpad (footpad may be up to 30mm / 1.18 inches high depending on model)
Weight (Net): 9.57 lbs
Weight (Gross): 11.2 lbs
Operating Temperature:
Storage Temperature:
Relative Humidity:
Power Supply Unit: External, 120 W, AC 100 to 240 V
Fan: 1 x 140mm, 12VDC
Kensington Security Slot: Yes
Standard Warranty: 3 years
Max. Number of Concurrent Connections (CIFS) – with
Max. Memory: 2000

Product Usage Instructions

Initial Setup:

Ensure the NAS is placed on a stable surface with proper ventilation.
Connect the power supply and Ethernet cable to the NAS.
Power on the NAS using the power button.

Data Storage Configuration:

Install compatible HDDs or SSDs into the drive bays.
Access the NAS interface via a web browser using the provided IP address.
Create storage volumes and configure RAID settings as desired.

Network Setup:

Assign a static IP address or configure DHCP settings for network connectivity.
Create user accounts and set up shared folders for network access.

Data Backup and Sync:

Utilize built-in backup features to schedule backups to external drives or cloud services.
Synchronize files between devices using Qsync for seamless data access.

Frequently Asked Questions

Q: Can I install different types of drives in the same bay?
A: No, to avoid damage, make sure to install only compatible drive types in their designated bays.

Q: How do I update the firmware of the NAS?
A: You can update the firmware through the NAS interface by navigating to the settings section and selecting the firmware update option.

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications and refer to the hardware user manual to install compatible QNAP memory modules.

Warning

Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting. QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress, and HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, the colors of products may also appear different from those shown on the site. Designs and specifications are subject to change without notice.