eta Crystina Electric Glass Water Kettle User Manual
- June 4, 2024
- ETA
Table of Contents
Electric glass water kettle
USER MANUAL
Crystina
Electric glass water kettle
eta 5153
INSTRUCTIONS FOR USE
Dear customer, thank you for purchasing our product. Keep these instructions
including the warranty, the receipt, and, if possible, the box with the
internal packing.
**** SAFETY WARNING
-
Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
-
Check whether the data on the type label correspond with the voltage in your socket.
The power cord plug has to be connected to the properly connected and grounded socket according to the national standard. -
This product can be used by children at the age of 8 years and older if they are supervised or if they were instructed regarding use of the appliance in a safe way and if they understand possible risks.
User cleaning and maintenance must not be performed by children if they are younger than 8 year and unsupervised. Children younger than 8 years must be kept out of reach of the appliance and its power cord. -
The device may be used by persons with reduced physical or mental abilities or lack of experience and knowledge only if they are under supervision or they have been instructed about using the appliance safely and understand the potential dangers.
-
Children must not play with the appliance.
-
The electric kettle is intended for heating the maximum of 1.7 l of water. If the water level exceeds the maximum recommended amount, hot water may be splashing out.
-
WARNING: Do not open the lid if the water is boiling or if it is hot.
-
CAUTION: Do not use the appliance with a program, time switch or any other part that turns the appliance on automatically as there is a risk of fire if the appliance is not covered or placed properly.
-
WARNING: Position the lid so that steam is facing away from the handle.
-
When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
-
Do not plug the fork of the supply cord into the power outlet and do not unplug the cord with wet hands or by pulling by the supply cord!
-
Use the electric kettle with the stand designed for this type only and only for its intended purpose.
-
Prevent injuries when handling (e.g. by hot water, steam).
-
The appliance is equipped with the heat safety lock which disconnects power supply if the steam sensor fails, if water boils away or if an empty kettle is turned on. If it happens, unplug the appliance from power supply and let it cool down. Do not fill the kettle with cold water in order to
cool it down quickly. It could reduce life of the heating element. -
Use this appliance only for the purpose for which it was designed as specified in this user‘s manual. Never use the appliance for any other purpose.
-
The producer is not responsible for damage caused by improper use of the appliance (e.g. burning, scalding, fire) and its guarantee for the appliance does not apply to situations when the safety warnings above are not complied with.
-
The kettle may not be used without the filter sieve.
USE OF THE APPLIANCE:
-
Use the electric kettle with the stand designed for this type only.
-
Never immerse the electric kettle and the stand in water and other liquids (even partially)!
-
Never leave the appliance unsupervised and check it during the whole time of water heating!
-
This appliance is not intended for outdoor use.
-
The appliance is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast). It is not intended for commercial use!
-
Use the appliance in the working position only at places with no risk of turning over and in sufficient distance from heat sources (e.g. heater, stove, cooker, oven, grill), flammable objects (e.g. curtains, drapes, etc.) and wet surfaces (e.g. sinks, wash basins, etc.).
-
Do not place the appliance near objects or under objects which could get damaged by steam, e.g. walls, kitchen cupboards, sideboards, paintings, or curtains. Leaking steam could damage them.
-
Do not use the appliance in an environment saturated with explosive or flammable steams.
-
There must be water in the electric kettle before putting into operation. Do not fill the electric kettle with water if it is on the stand.
-
According to the type of your kettle, the surface is ceramic or glass. These materials are very fragile, pay special attention when handling, operation, maintenance and storage to avoid injury.
Never use the kettle if it is broken, cracked or shows signs of any damage or fissure. -
Do not touch outer surfaces during operation of the kettle, they are hot and there is a risk of getting burned. Do not touch thel lid during and after cooking!
-
Before switching on the kettle ensure that the water level is between MIN and MAX marks
-
If you are not going to use the electric kettle for longer time, we recommend unplugging the stand from power supply by taking the fork of the power cord out of the socket.
POWER CORD:
- If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.
- Never use the appliance if its power cord or plug is damaged, if it does not work properly, if it fell down and was damaged or if it fell to water. In this case take the appliance to a special service to check its safety and proper function.
- Never put the power cord on hot surfaces or do not let it hang over the edge of a table or a work top. Plugging or pulling the power cord e.g. by children can result in tilting over or drawing the appliance down and serious injury!
- The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into water or bent over sharp edges.
DESCRIPTION OF THE APPLIANCE
A – electric kettle
A1 – off/on button 0/I (steam sensor switch*)
A2 – control light
A3 – water gauge
A4 – handle
A5 – lid
A6 – filtration sieve
A7 – water filling hole
B – removable stand
B1 – central connector
B2 – power cord
- The steam sensor ensures automatic switch off the appliance after reaching the boiling point.
INSTRUCTIONS FOR USE
Remove all the packing material and take out the electric kettle with the stand. Remove all possible adhesion foils, stick-on labels, or paper from the appliance. Fill the kettle with clean cold water up to max., turn it on and let the water boil before first use. Then Pour the water out and repeat the process several times (at least five times).
APPLICATIONS
Unwind the necessary length of the power cord B2 from the storage space of
the stand B. Plug the fork of the power cord to the electric socket. Hold
the kettle A on the handle A4. Fill the kettle with drinking water through
the water filler hole A7 (or remove the lid A5 and replace it properly
after filling the kettle). Fill the kettle with drinking water. The minimum
and maximum amount of water is marked on the water gauge A3. Put the
electric kettle on the stand and turn it to the I position by the A1
button. Function of the electric kettle is signaled with the control light
A2. After boiling the appliance switches off automatically. Before
reaching the boiling point, you can switch off the appliance by turning the
A1 button to the 0 position. Always use fresh drinking water for boiling.
ATTENTION
-
When heating water, the lid must be closed, otherwise the kettle will not turn OFF.
-
In bigger tilting of the electric kettle backwards, particularly when it is filled up to maximum, water can flow out from the electric kettle in the bottom part of the kettle.
This does not affect safety or other functions and it does not mean any failure of the electric kettle. In the case of tilting the electric kettle with hot water there is a risk of scalding. Therefore do not tilt the electric kettle. -
Recommendation: When the kettle is not used, do not place it on the stand connected to the mains. If you are going not to use the kettle for a long time, unplug the power cord from the wall socket.
MAINTENANCE
Unplug the appliance from power supply by taking the fork of the power cord out of the socket! Clean the kettle only when it is cooled down! Do not use rough and aggressive detergents (e.g. sharp objects, scrapers, diluting agents or other solvents)! The casing of the electric kettle is made of top-quality glass and the heating bottom is made of top-quality stainless steel, but in common use, impurities from water get stuck on them (water scale), particularly above the heating element. It is not rust or another material defect of the kettle container and the appliance is not subject to a complaint for this reason.
Cleaning the kettle
Pour about 50 g citric acid to the kettle with the water scale sediment. Fill
the kettle to about one half and mix. After it dissolves, fill the kettle to
3/4 of the maximum amount of water. Place the electric kettle on the stand and
turn it on. Before boiling, turn off the kettle, let the solution take effect
for about 10 minutes and then pour it out. Clean the kettle thoroughly with
clean water. Repeat the whole procedure if the kettle is too soiled. Clean
the electric kettle regularly!
Cleaning the sieve (A6)
Take the sieve from the kettle. Clean it from possible sediments in running
water using a fine brush. Then put the sieve back in the opposite way.
ENVIRONMENT
Printed signs of materials used for manufacture, packing, components, and accessories, as well as their recycling, are on all the pieces if their dimensions enable it. The symbols on the product or in the accompanying documentation mean that the used electric or electronic products must not be disposed together with municipal wastes. Please, hand them over to the collection points designed for their correct disposal, where they will be accepted free of charge. By correct disposal of this product you can help to preserve valuable natural resources and help to prevent possible negative impacts to the environment and to human health, which could be the results of incorrect waste disposal. For further details ask the municipal authorities or the nearest collecting point. Penalties can be charged for incorrect disposal of such wastes, according to national regulations. If the appliance is to be put out of operation definitely, we recommend cutting off the feeder cable, to disable its use.
Expert service must do the large maintenance or to intervene into inside parts of the appliance! Non-observance of the instructions of the manufacturer cancels the right for guarantee repair!
TECHNICAL DATA
Voltage (V) | shown on the type label of the appliance |
---|---|
Absorbed power (W) | shown on the type label of the appliance |
Max. volume (l) | 1.7 |
Weight (kg) approximately | 1.1 |
Protection class of the appliance | I. |
Size, (mm): | 210 x 150 x 230 |
Input in off mode is | < 0.5 W |
The manufacturer reserves the right to change the technical specifications and accessories for the respective models.
HOUSEHOLD USE ONLY.
DO NOT IMMERSE IN WATER OR OTHER LIQUIDS.
TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC
BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS
BAG IN CRIBS, BEDS, CARRIAGES, OR PLAYPENS. THIS BAG IS NOT A TOY.
The product must not be disposed as household waste.
When the product durability is over, please, deliver the product to the
respective collection point, where the electrical appliances will be recycled.
Do not use the appliance close to bath tubs, showers, bash basins, or other
water containers.
© DATE 12/04/2022
e.č.08/2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>