HENEX HC-3208R Wireless Barcode Scanner 2D with Auto Sensing Stand User Manual

HENEX HC-3208R Wireless Barcode Scanner 2D with Auto Sensing Stand

Introcuttion

This scanner includes wireless 2.4G, wireless Bluetooth and Type-C transmission modes, these transmission modes can be switched any time.
When the scanner turns on, it will automatically enter the interface detection status, if the Type-C cable is connected and recognized, the scanner will enter the wired transmission mode, therwise it will enter wireless transmission mode.

Factory default()
Note: Factory default settings are marked with an asterisk “” in this manual

Communication Mode

Pair Method

4G Receiver mode

To enter the pairing status, first scan “2.4G Receiver Mode”, then scan “Pairing Setting”(the green light will flash or the screen will flash (optional) ). Now plug the USB dongle into the device, when hearing a “beep” sound, it means the pairing is successful and the blue light is always on or the screen stops flashing (optional). (The whole pairing process takes about 1 min, if timeout and the pairing failed, it will automatically exit the pairing mode)

Bluetooth pairing

To enter the pairing status, fi rst scan”Bluetooth HID Mode”, then scan “Pair Setting”(the green & blue light will flashor the screen will flash (optional) ). Now turn on the Bluetooth in your device , search and select the device “Barcode Scanner HID”, when hearing a “beep” sound, it means the pairing is successful and the blue light is always on or the screen stops flashing (optional). (The whole pairing process takes about 1 min, if timeout and the pairing failed, it will automatically exit the pairing mode)

Scan Mode

Inventory Mode

Note: upload all data, means that upload all data in storage.

Immediate Mode

In immediate mode, after the wire or wireless transmission is successful, the scanner emits a short sound and the green light flashes once.
The scanner exceeds the transmission distance or send data fails, all data will be lost, at the same time, sound 3 times alarm prompt continuously and green light flashes 3 times.

Bluetooth upload speed setting

Sound Setting

Shake Setting

Sleep Time Setting

Terminal Setting

Language Setting

Interface

LED Indicator

1. Red light is always on when charging, it turns off when the battery is full or the charging line is not connected. If the red light flashes, the battery may be not applied or not applied appropriately;
2. Regular blue light indicates that all connections are in good condition;
3. Green light flashes when under 2.4G connection Or the screen flashes (optional);
4. Green & blue lights flash synchronously when under HID connection Or the screen flashes (optional);

Buzzer Description

Notification

1. Please read this manual carefully before using the barcode scanner;
2. The charging voltage of the scanner is 5V, please use a 5V/1A power adaptor for charging to ensure that there is sufficient power for the normal operation of scanner;
3. Our company reserves all rights, and reserves the right to make changes to the product to improve its reliability, functionality or design;
4. This package includes: 1 barcode scanner; 1 receiver; 1 Type-C cable; 1 usefs manual;
5. Please be advised that any revision of this manual will not be informed.

This user’s manual is designed for 2D barcode scanner. For detailed usage information, please download the complete user’s manual from our website or from our authorized distributors.

How to program this scanner:

1. Scan the “Enter setup” code
2. Scan the settings codes which you need
3. Scan the”Exit setup” code.
4. Setup is now complete and the scanner is ready to be used with your selected settings.

System settings

Factor y default settings

Note: Factory default settings are marked with an asterisk “*” in this manual.

Interface

Barcode types

Reading mode

Sensitivity

Sound

Aiming

USB-KBW Setting

Keyboard Charactor output

Case Conversion

Keyboard layout

Baud rate

Documents / Resources

| HENEX HC-3208R Wireless Barcode Scanner 2D with Auto Sensing Stand [pdf] User Manual
HC-3208R Wireless Barcode Scanner 2D with Auto Sensing Stand, HC-3208R, Wireless Barcode Scanner 2D with Auto Sensing Stand, Barcode Scanner 2D with Auto Sensing Stand, Auto Sensing Stand, Sensing Stand, Stand
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>