VOLVO 32257777 Charging Cablr Mode 2 Typr Connector User Guide

VOLVO 32257777 Charging Cablr Mode 2 Typr

Specifications

• Input Voltage: Type B / C 20A breaker for IEC 60309 Blue 1P16A, Type I, Type G, CEE 7/7 AC input plug
• Grounding: Equipped with equipment grounding conductor and grounding plug
•  Operation Mode: Type 2

Product Usage Instructions

Installation and Mounting
Wall mounting and cable rewind with the attached Velcro is recommended for permanent or temporary surface installation.

Charging an Electric Vehicle

1. Connect the AC plug to a dedicated AC socket outlet.
2. When connected, the LED indicator will illuminate solid white, indicating readiness for charging.
3. Connect the vehicle connector to the electric vehicle inlet to start the charging session automatically.

Stopping Charging

1. Press unlock on the key or EVI button.
2. Disconnect the vehicle connector from the electric vehicle.
3. Remove the AC plug from the AC socket-outlet.

Changing the AC Plug

1. Disassemble the adapter plug by rotating the adapter cap for loosening the plug.
2. Assemble the adapter plug by aligning the mark and inserting the plug, letting the adapter cap rotate automatically.

Charging Cable Indicator Status

recovered.
Blinking white / Solid white| Charging. The charging cable is ready to charge.

FAQ
Q: Can I use this charging cable with any electric vehicle?
A: The charging cable is intended for vehicles not requiring ventilation during charging. Ensure compatibility with your electric vehicle before use.

ACCESSORIES USER GUIDE
CHARGING CABLE – MODE 2 TYPE 2 CONNECTOR

The specifications, constructional data and illustrations contained in this publication are not binding. We reserve us the right to make alterations without prior notification.

Safety Information
Important safety instructions – save these instructions

WARNING
A RISK OF FIRE OR ELECTRIC SHOCK CAUTION: To reduce the risk of fire, connect only to a circuit provided with Type B / C 20A breaker for IEC 60309 Blue 1P16A, Type I, Type G, CEE 7/7 AC input plug, and a circuit provided with Type B / C / D 20A breaker for IEC 60309 Red 3P16A, and Type B/C/D 40A breaker for IEC 60309 Blue 1P32A AC input plug.

The charging cable is intended only for charging vehicles not requiring ventilation during charging.
Read the safety information and instruction carefully before you install and operate the charging cable to avoid fire and injury.

• Read all the instructions before using this product
• Always follow local electrical regulation when using the charging cable.
• Always conduct a visual inspection to ensure no physical damage to charge cable outlook. Stop using it immediately and contact local Customer Support if there is any damage.
• DO NOT use the charging cable with damaged socket-outlet.
• DO NOT use this product if the flexible power cord or EV cable is frayed, has broken insulation, or any other signs of damage.
• DO NOT use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other indication of damage.
• Children should be supervised when in the vicinity of the charging cable, when the charging cable is connected.
• DO NOT put your fingers into the connector.
• DO NOT use the device at potentially explosive atmosphere areas.
• DO NOT pull the charging cable while it is in charging session.
• DO NOT use the charging cable with an extension cord and the adapter of vehicle connector.
• DO NOT make any unauthorized changes or modifications to the charging cable.
• DO NOT remove any identifiers such as safety symbols, warning instructions, plates, labelsor cable markings.
• Must disconnect the AC plug from AC socket-outlet when using adapter plug.
• Repair work to charging cable shall only be performed by the manufacturer.

Grounding instructions

This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate socket-outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING
Improper connection of the equipment-grounding conductor is able to result  in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product – if it will not fit the socket-outlet, have a proper socketoutlet installed by a qualified electrician.

Installation

Mounting
Wall mounting and cable rewind with the attached Velcro on a surface permanently or temporary is recommended.

Storage

Use the Velcro to tie up the charging cable.

Operation
Mode 2 (Type 2) Charging Cable Overview

1. AC input plug
2. Harness
3. Adaptor plug (if applicable)
4. LED indicator
5. Harness
6. Vehicle connector
7. Vehicle connector cap

| NOTE
---|---
The adaptor plug is not a standard offer depending on the applied regions.

AC Input Plugs

Charging an Electric Vehicle
To start charging an electric vehicle:

1. Connect the AC plug to a dedicated AC socket-outlet.

2. When the charging cable is connected to an AC socket-outlet, the LED indicator will illuminate solid white, indicating the charging cable is ready for charging.
   NOTE

   • The vehicle shall be parked close enough to the AC socket-outlet for connection.
   • Ensure the charging cable will not be stepped on to avoid damage.

3. Connect the vehicle connector to electric vehicle inlet, the charging session will start automatically.

To stop charging an electric vehicle

1. Press ”unlock” on the key or press the button on the EVI.
2. Disconnect the vehicle connector from the electric vehicle.
3. Remove the AC plug from the AC socket-outlet.

Changing the AC Plug
The AC plug of the charging cable can be changed to adapt the electrical environment.

NOTE

• The adaptor plug is not a standard offer depending on the applied regions.
• This instruction is only applicable to Mode 2 charging cable – with adaptor plug.

1. Disassemble the adapter plug: rotate the adapter cap for loosening the plug.

2. Assemble the adapter plug: align the mark and insert the plug, the adapter cap will rotate automatically.

NOTE

• Only the corresponding adaptor plugcan be plug into the charging cable adaptor.
• Must not connect other device to the charging cable adaptor.
• Must disconnect the AC plug from AC socket-outlet when you change the plug.
• Must not use the charging cable if the align mark is not in the right position.

Charging Cable Indicator Status

Fault and Troubleshooting Indicators

User maintenance

Environmental Specifications

Storage Environment

Humidity:
Temperature:
Altitude:| <95%RH
-40°C ~ +85°C

(-40°F ~ +185°F)

4,000 m (13,120 ft.)
Operation Environment
Himidity:

Temperature:

Altitude:

| <95%RH
-40°C ~ +60°C

(-40°F ~ +140°F)

4,000 m (13,120 ft.)
External magnetic field:

Frequency:

Sinusoidal wave distortion:

| Not exceeding five times the earth’s magnetic field in any direction.
Rated Value (as defined in spec label).
Not exceeding 5%

Cleaning

• Only clean the charging cable in unplugged condition.
• Clean the charging cable with a dry cloth and make sure no water enters the pins.
• Do not use cleaning agent to clean the charging cable.

Disposal

The charging cable is an electronic device and must be disposed of separately from normal house wastes. Please have it disposed in compliance with the waste disposal and recycle local regulation.

Warranty

Customer Service can provide more information on the terms of the warranty. However, the following cases are not covered by the warranty:

• Defects or damage caused by not using the product as specified in this instruction.
• Costs and damage caused by repair work that is provided by unauthorized specialist.

Volvo Cars Support
Go to support.volvocars.com to visit the site. The support site contains contact details to customer support and your nearest Volvo retailer. For more information and customer service, please refer to vehicle user manual or contact dealership.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>