ITOPVIS NV-V110U2 HD Conference Camera

ITOPVIS NV-V110U2 HD Conference Camera

Figure of Product Interface

1. Lens
2. Body
3. IR Receiver, power indicator
4. Hole for Installing screw
5. Hole for positioning
6. USB 2.0 interface(Type B)
7. 485 interface
8. RS232 interface
9. DC 12V power socket

Remote Control Description

1. (POWER) Key
   Pressing it, the camera goes into Standby Mode; Pressing again, the camera goes into Power-On Mode, it will self-test again and back to HOME position. (Note: If the preset position O is set, the camera will automatically go to the specified preset position in the power-on mode.)

2.  (CAMERA SELECT) Key Choose the camera address ready for control.

3.  (POSITION) Key Set or run presets.

4. I# J Key Key combination use.

5. I* J Key Key combination use.

6.  (Focus) Key (Auto) : Enter into auto focus mode. (Manual) : Enter into manual focus mode. (FOCUS+) Manually adjust the focus. (FOCUS-) Manually adjust the focus.

7. (Zoom) Key
   (ZOOM+) : Lens near.
   (ZOOM-) : Lens far.

8. (SET PRESET) Key
   (SET PRESET) + (0-9) number key.

9. (CLEAR PRESET) Key:
   (CLEAR PRESET) + (0-9) number key.

10. (PAN-TILT) Key:
    (A): Up.
    (v) : Down.
    I ( J : Left.
    I) J : Right.
    (HOME) : Back to the horizontal and vertical center position.

11.  (BLC ON/OFF) Key:
    Back light compensation ON/OFF (Reserved).

12. (MENU) Key:
    Open or close the OSD menu (Reserved).

13. Camera IR remote control address setting (•J + I# J + (Fl J : Camera address No. 1
    () + I# J + (F2) : Camera address No. 2
    () + I# J + IF3) : Camera address No. 3
    (•) + I# J + IF4) : Camera address No. 4

14.  Key combination Functions
    (#) + (#) + (#) : Clear all presets.
    (•J + (#) + 16) : Restore factory defaults.
    (•J + I#) + 17) : Image mirror.
    (•) + (#) + 19) : Image flip.

After the camera is powered on, it starts to initialize. Both the horizontal and vertical positions are turned to the middle position. The motor stops running and the initialization is completed.
( Note: if No.O preset position is set, the head will put it to No.O preset position)

Packing Listing of Product

Product Size

Product Specification

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>