TOURATECH 3261-0 Seitentasche Endurance Black 2er Set Instruction Manual
- August 22, 2024
- Touratech
Table of Contents
3261-0 Seitentasche Endurance Black 2er Set
Instruction Manual
3261-0 Seitentasche Endurance Black 2er Set
We recommend having the installation carried out in a workshop with appropriately trained personnel.
| Caution
---|---
| Note
| Warning
| Liquid
| Torque
| Template
| 2 Persons
| Original motorcycle part
Steel 8.8| lnox A2
M4 2,7| 0,8 Nm
M 5 5,5| 1,7 Nm
M 6 9,7| 3,0 Nm
M 8 23,0| 7,9 Nm
M10 47,0| 14,0
M12 80,0| 24,0 Nm
M14 130,0| -,- Nm
M16 196,0| 59,0 Nm
M18 270,0| -,- Nm
M20 385,0| 114,0 Nm
These instructions are written based on our current state of knowledge.
Information is provided without any guarantee as to its accuracy. Subject to
technical modifications.
The order of assembly steps must be followed.
Touratech accepts no liability for incorrectly fitted parts and resulting
material damage or personal injury!
Please observe applicable road vehicle (construction and use) regulations as
well as EC/ECE Directives and applicable laws in your country. If parts are
fitted which require inspection and/or approval after fitting, take your
vehicle to a testing station immediately and have the vehicle papers updated.
Check and if necessary tighten all bolted connections after SO km.
Standard tightening torques in Nm for bolted connections with strength class
8.8.
For special tightening torques refer to a workshop with appropriately trained
personnel !
Please take into account that fitting panniers, crash bars, foot peg lowering
kits (rider and pillion),Kickstand enlargmentplate, front spoilers and engine
guards may restrict the bike’s lean angle!
If modifications are made to the fairing, stem, handlebar, fairing parts,
etc., ensure that electrical wiring, brake lines, accelerator and clutch
cables are refitted correctly. Check clearance, both sides with full steering
lock.
Always disconnect the battery when working on the electrics!
We recommend cutting protective film to size and applying it to impact areas
that are likely to be chipped by stones.
Work on the brake system and suspension should always be carried out in a
workshop with appropriately trained personnel.
The maximum load on luggage racks is S kg! luggage racks ZegaPro TC is 10 kg!
If other original accessories or aftermarket accessories are used, ensure
clearance, fitment and do not come into contact with other parts!
Apply conventional lubricant to stainless steel bolts prior to assembly.
PDF fitting instructions also can be downloaded from the Touratech webshop.
Mounting instructions
01-055-3260/3261-0 Seitentasche Endurance Black by Tou ratech Waterproof 01-055-3260/3261-0 Seitentasche Endurance Black by Touratech Waterproof 01-055-3260/3261-0 Seitentasche Endurance Black by Tou ratech Waterproof 01-055-3260/3261-0 Seitentasche Endurance Black by Touratech Waterproof
April 2024 by: Touratech GmbH, Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>