TELLUR TLL511471 Vibe Bluetooth Over Ear Headphones User Manual
- June 13, 2024
- Tellur
Table of Contents
TELLUR TLL511471 Vibe Bluetooth Over Ear Headphones User Manual
Thank you for choosing Tellur products!
To ensure an optimum performance and safety, please read this user manual
carefully before using the product. Keep this user manual safe for future
references.
GENERAL SAFETY INFORMATIONS:
WARNINGS
- Please, keep the headset away from water or other liquids.
- If you need to clean the headset, please, make sure it is not connected to the power supply.
- Avoid using next to sources of increased heat or humidity.
- Unplug the headset from the power source when is not charging.
ATTENTION
- Don’t use the product if it is damaged in any way, shape, or form.
- Don’t attempt to repair, disassemble, or modify this product.
- Don’t place the product near any heat source.
NOTES
- Do not use it while operating a motorized vehicle. It may create a traffic hazard and is dangerous.
- If you experience a ringing in your ears, reduce volume or discontinue use.
- Do not use your headphones at a high volume for a long time. Hearing experts advise against continuous extended play.
PRODUCT OVERVIEW
PRODUCT DIAGRAM
MAIN FUNCTIONS
- Power key
- Long press the button for three seconds to power on.
- Long press the button for three seconds again to power off.
- Find the Bluetooth name “Tellur Vibe” in the search list to connect it to your mobile or other Bluetooth devices.
- While the music is playing, click the power button once to play/pause music.
- In wireless mode when receiving a call: short press to answer/end the call, long press to refuse incoming call.
- Triple press to activate voice assistant.
- + key:
- Short press: volume +
- Long press: next song
- key:
- Short press: volume –
- Long press: previous song
- ANC button
- Short press once to activate ANC mode, short press again to switch back to normal mode.
- You can also insert a 3.5mm cable and connect your mobile with the headset and listen to the music from your mobile or computer.
- LED lights
Power on | Red and blue flash |
---|---|
Power off | Red light flash 3 times |
Connected | Light off |
Incoming call | Blue light flash quickly |
During call | Blue light flash every 8 seconds |
Fully charged | Light off |
IN THE BOX
- 1 x Headset Over-Ear Bluetooth
- 1 x Type C cable,
- 1 x Audio cable
- 1 x User Manual
TECHNICAL SPECIFICATIONS
Bluetooth version: v5.3
Wireless range: 10 m
Microphone: Yes
Frequency: 2.4GHz, Class 2
Supported profiles: HSP/HFP/A2DP/AVRCP
Driver unit: 40mm
Frequency response: 20Hz-20KHz
Sensitivities: 113±3dB
Impedance: 32Ω Technology ANC Yes
Music play time: up to 15 hours ANC on, up to 20 hours ANC off
Standby time: up to 200 hours
Charge time: up to 2 hours
Volume control: Yes
Input: Type C, 5V
Audio port: AUX 3.5 mm
Bluetooth pairing name: Tellur Vibe
Color: Black
Product dimensions: 19 x 18.5 x 8cm
Product weight: 150g
Package includes:
1 x Bluetooth Over-Ear Headphones,
1 x Type C cable,
1 x Audio cable
1 x User Manual
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product, battery, literature, or
packaging reminds you that all electronic products and batteries must be taken
to separate waste collection points at the end of their working lives; they
must not be disposed of in the normal waste stream with household garbage.
It is the responsibility of the user to dispose of the equipment using a
designated collection point or service for separate recycling of waste
electrical and electronic equipment (WEEE) and batteries according to local
laws. Proper collection and recycling of your equipment helps ensure EEE waste
is recycled in a manner that conserves valuable materials and protects human
health and the environment, improper handling, accidental breakage, damage,
and/or improper recycling at the end of its life may be harmful for health and
environment.
Warning and Declaration
Corded and Wireless – Europe
Please read through all applicable sections.
For your protection and comfort, ABN Systems International S.A. has
implemented protective measures in this product designed to maintain safe
volume levels and ensure that the product operates in compliance with
government safety standards.
AUDIO PRODUCT WARNING!
PERMANENT HEARING LOSS MAY RESULT FROM LONG-TERM EXPOSURE TO SOUNDS AT HIGH
VOLUMES. USE AS LOW A VOLUME AS POSSIBLE.
Avoid prolonged use of headsets at excessive sound pressure levels.
You can reduce the risk of hearing damage by following these safety
guidelines:
- Prior to using this product follow these steps
- Before using the product, turn the volume control to its lowest level,
- Put the headset on, if applicable
- Slowly adjust the volume control to a comfortable level.
- During the use of this product
- Keep the volume at the lowest level possible
- If increased volume is necessary, adjust the volume control slowly
- If you experience discomfort or ringing in your ears, immediately discontinue using the product. With continued use at high volume, your ears may become accustomed to the sound level, which may result in permanent damage to your hearing without any noticeable discomfort.
GENERAL SAFETY INFORMATION!
-
If you have a pacemaker or other electrical medical devices, consult your physician before using this product.
-
This package contains small parts that may be hazardous to children. Always store the product out of reach from children. The bags themselves or the many small parts they contain may cause choking if ingested.
-
Never try to dismantle the product yourself, or push objects of any kind into the product, as this may cause short circuits which could result in a fire or electric shock.
-
None of the components can be replaced or repaired by users. Only authorized dealers or service centers may open the product. If any parts of your product require replacement for any reason, including normal wear and tear or breakage, contact your dealer.
-
Avoid exposing your product to rain or other liquids.
-
Keep all products, cords, and cables away from operating machinery.
-
Observe all signs and instructions that require an electrical device or RF radio product to be switched off in designated areas such as hospitals or aircrafts.
-
If the product overheats, has been dropped or damaged or has been dropped in a liquid, discontinue use.
-
Dispose of the product according to local standards and regulations (see www.tellur.com/weee).
Remember: Always drive safely, avoid distractions and follow local laws!
The use of a speaker while operating a motor vehicle may be regulated by local laws. Using a headset while operating a motor vehicle, motorcycle, watercraft or bicycle may be dangerous, and is illegal in some jurisdictions, just as use of this headset with both ears covered while driving is not permitted in certain jurisdictions. Check with your local authorities.
BUILT-IN BATTERY CARE: Please observe the following if the product contains a battery. -
Your product is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.
-
The battery can be charged and discharged hundreds of times, but will eventually wear out. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.
-
If left unused, a fully charged battery will lose its charge over time.
-
Leaving the product in hot or cold places will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A product with a hot or cold battery may not work temporarily, even when the battery is fully charged.
Battery warning! -
”Caution” – The battery used in this product may present a risk of fire or chemical burn if mistreated. Batteries may explode if damaged.
-
Only recharge your battery with the provided approved chargers designated for this product.
-
Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste or in a fire as they may explode.
-
Unless otherwise specified in the user manual or quick start guide the battery in your product can not be removed or replaced by the user. Any attempt to do so is risky and may result in damage of the product.
For information on batteries please go to: www.tellur.com/batteries.
CHARGER CARE: Please observe the following if the product is supplied with a charger -
Do not attempt to charge/power your product with anything other than the charger provided. The use of any other types may damage or destroy the product and could be dangerous. Use of other chargers may invalidate any approval or warranty. For availability of approved enhancements, please check with your dealer.
-
Charge/power the product according to the instructions supplied with the product.
Important: Please refer to the user manual for a description of the charging status indicator lights. Some products cannot be used while charging. Charger warning! -
Do not use a wall charger with more than 5V and 2A output.
-
When you disconnect the power cord or any enhancement, grasp and pull the plug, not the cord. Never use a charger that is damaged.
-
Do not attempt to disassemble the charger as it may expose you to dangerous electric shock.
MAINTENANCE
- Unplug the product or charger before cleaning
- Clean the product by wiping with a dry or slightly damp cloth. The cord and charger may only be dry-dusted.
Declaration of conformity
We, ABN SYSTEMS INTERNATIONAL S.A, Bucharest, Sector 1, Marinarilor street, nr. 31, declare on own responsibility that the product below:
Product description | Brand | Product code |
---|---|---|
Vibe Bluetooth over-ear headphones, black | Tellur | TLL511471 |
Does not endanger life, health, work safety, does not have a negative impact
on the environment and corresponds to the standards stated in the
manufacturer’s declaration of conformity.
The product is compliant with the following standards and / or other
normative documents:
-
RED – 2014/53/EU
-
Applied standards:
-
EN IEC 62368-1:2020+A11:2020
-
EN 55032:2015+A11:2020+A1:2020
-
EN IEC 61000-3-2:2019 +A1:2021
-
EN 55035:2017+A11:2020
-
EN 61000-3-3:2013+A2:2021+AC:2022
-
ETSI EN 301 489-1 v 2.2.3 (2019-11)
-
ETSI EN 301 489-17 v 3.2.4 (2020-09)
-
ETSI EN 300 328 v2.2.2 (2019-07)
-
EN 50663:2017, EN 62479:2010
ROHS – 2011/65/EU
The product bears CE mark, applied in 2023.
Name: George Barbu
Function: General manager
Place and date: Bucharest, 22.03.2023 Signed:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>