VIKYLIN Ycx 4K Outdoor Security Camera User Guide
- September 19, 2024
- VIKYLIN
Table of Contents
VIKYLIN Ycx 4K Outdoor Security Camera
Turn on the camera alarm light and alarm audio
Go to Camera Web
Approach A : Connect the camera directly to a computer, or a switch or router on the same LAN as the computer
Download and install ajdevtool on your computer.
Download address: http://ourdownload.store/AjDevTools_V5.7.2_20230825.exe
Search for the camera to see the camera’s ip address
Right-click on the camera’s ip address to go to the camera’s web side, and plug theca era into the nvr’s poe port after completing the second step
Approach B : Access to the web side of the camera via virtual host Connect all cameras to the poe port of the nvr, and connect the nvr to a computer, or atwitch or router on the same LAN as the computer
Download and install “sadp” on your computer.”
Download address：
https://www.hikvision.com/en/support/tools/hitools/clea8b3e4ea7da90a9/?q=sadp&pageNum=1&position=1&hiksearch=true
Search for nvr, you can see the ip address of nvr.
Double click on the ip address of the nvr to go to the web side of the nvr.
Click “configuration-network-advanced settings – other” Check enable virtual host”
Click “system – camera Management ” And click on the blue ip address to go to the web
Click “configuration – event – intelligent detect” Change the status of the
camera to “enable”.
Change Arming Setting to “all day Deployment”.
- light blink: the camera’s white light is blinking
- Trigger: The camera sounds an alarm.
- Tiggre output : The camera emits a red and blue light alarm