VIKYLIN PG Series 8MP Auto Tracking Pan Tilt Zoom POE IP Camera User Guide

PG Series POE IP Camera
Quick Start Guide

System Requirement

Operating System
Microsoft Windows XP SP1/7/8/ 10
CPU
3.0 GHz or higher
RAM
4G or higher
Display
1024768 resolution or higher
Web Browser
For camera that supports plug-in free live view Internet Explorer 8 – 11, Mozilla Firefox 30.0 and above version and Google Chrome 41.0 and above version.
Note:
For Google Chrome 45 and its above version or Mozilla Firefox 52 and its above version which are plug-in free, Picture and Playback functions are hidden. To use mentioned functions via web browser, change to their lower version, or change to Internet Explorer 8.0 and above version

Network Connection

2.1 Setting the Network Camera over the LAN
Purpose:
To view and configure the camera via a LAN, you need to connect the network camera in the same subnet with your computer, and install the Jade Tools or SADP software to search and change the IP of the network camera
Tools: http://ourdownload.store/

2.2 Wiring over the LAN
The following figures show the two ways of cable connection of a network camera and a computer
Purpose:

1. To test the network camera, you can directly connect the network camera to the computer with a network cable. (Connect- ing directly must supply the camera with DC 12V power supply) Connecting Directly

2. Set network camera over the LAN via a switch or a router. (If it is a POE switch, you do not need to power the camera).
   Connecting via a Router or a Switch

3. Connect cameras to NVR

NVR with POE

NVR without POE

Access to the Network Camera

3.1Accessing by Web Browsers
Steps:

1. Computer download and install the AjDev Tools or SADP software tool
2. After installation. open the software and click the Start Search
3. Search for the IP address of the camera;
4. Query the IP address of the Camera.
5.  Modify the IP address of the camera and computer in the same network segment

Setting method:

1. Select the IP address of the camera;
2. Click IP Batch Manual Setting IP address;
3. Modify the IP address of the camera to be in the same network segment as the IP address of the computer or choose DHCP to obtain an IP address automatically;
4. Select OK–Successfully modified;
5. The status shows ” Login success”, it can be accessed by the computer Web; If you want to configure the camera, click on “Remote configuration” or “Open Web Page”.

3.2Web login

Note:
The default IP address is 192.168.1110. Username: admin Password: 123456
First login Click “install Web Plug-in” when prompted

1. You have to download and run the executable as administrator.
2. If failed to install plug-in, download and save the WEBConfig.exe to computer, close all browsers then re-install it
3. If there is a delay in video response when accessing remotely, please switch to Sub Stream instead. To learn the function of each button, just put the mouse on, it will show screen tips.
4. P2P function settings

Steps: Configuration > Network »P2P >Enable>Save

Using the P2P ID or QR code, you can access the camera remotely anywhere VeraSMART phone with Internet access
Please register an account via mobile phone after installing the AC18Pro APP from APP Store or Google Play Market, then login and add your camera to start previewing. smart phone with Internet access
P2P function add steps:
Visit the Apple App Store or the Google Play Store to download the
AC18Pro app for i0S or Android devices

Scan QR code download http://www.icamra.com/getmobileapp/ac18pro/index.html

1. For new users, please select “registered account”. In the following page, Create Account .and enter your email or mobile number. Fill in the received verification code
2. Login with a registered account, Select to Add devices, Select “Wired connection” to get into the scan camera QR code page.
3. Scan the QR code of the P2P interface displayed on the web side of the camera- Choose Name of you Device. The camera has been successfully added to the phone.
4. select the camera list to start viewing video

Tips:

1.  Select iota to check your account profile and configure settings on
2. To share your camera with your friends or another user, click icon and type in or scan his/her AC18Pro account

Note:
If you can not connect the camera, please check your Internet connection and verify the IP address, gateway, and DNS setting in the camera. The Cloud login status should be online, which means the camera has registered to the cloud server.

Camera Connection to NVR

There are two ways that connect to NVR (two types of NVR)

1. Connect to POE port NVR
2. Connect to without POE port NVR

The camera can work with Hikvision POE NVR. Plug and Play, besides, the IP camera also supports standard ONVIF protocol ,which can be added to third- party video recorder easily with ONVIF.
Note:

1. Before connecting cameras to NVR that has POE switch ,Make sure the NVR and the camera are on the same network segment .( e.g.: Dehua NVR POE Port’s IP Network Segment is 10.1.1.XX, so the camera IP must be 10.11XX)
2. Before connecting cameras to NVR that has no POE switch, make sure the NVR, cameras and the POE switch router have valid IP scheme that match’s each other.( e.g.: POE switch router router’s IP is 192. 168, 1.1, so the camera IP must be 192. 168. 1.XX)
3. Some POE NVR models support plug and play(such as Hikvision POE NVR),if the “Plug & Play’ feature is not available or not applicable. please add camera manually.

Frequently Asked Questions

5.1 Why can’t open the default IP address 1921681110 via web browser ?
The default IP address may not match your LAN’s IP scheme. Check your computer’s IP address before accessing the camera. If the IP address does not match the 192. 168. 1.x scheme, please install the IP search tool from the download website to modify the camera’s IP address. Make sure the IP address of the camera matches the LAN IP scheme. For example, if the your LAN is 192. 168.0.xxx, then set the IP camera to 192. 168.0. 110 and so on.
5.2 How to reset the password?
The default Username: admin, Password: 123456. If you lost the password or want to reset the camera’s setting, please install the search Jadav to search the camera IP and click Batch Reset button.
5.3 How to upgrade the IP camera?

1. Ask the supplier for the suitable firmware.
2. You can use the web browser, search tool, or PC client to upgrade the camera
3. Go to the Configuration » System > update, click browse and select the firmware, then click Upgrade button and wait for the operation to complete.

5.4 How to fetch the RTSP video stream and http snapshot ?
(D Main Stream: rtsp://admin:123456@IPaddress/stream0
(2) Sub Stream: rtsp://admin:123456@IPaddress/stream1
5.5 Why does the NVR not show image after adding your IP camera ?

1. Make sure you selected the right protocol and enter the correct username and password when adding the cameras.
2. Make sure the NVR and IP camera are the same IP scheme. (eg NVR:192. 168. 1.x, and IP camera:192. 168. 1.y)
3. Try changing the camera encode mode to H.264 if the NVR can’t support H.265. (Configuration —» Camera – Video – Encode mode: H.264)

5.6 How to make the NVR record in motion detection mode ?

1. Enable the IP camera motion detection function via web browser.
2. add the IP camera via ONVIF protocol
3. change the NVR record mode to Motion Detection mode.
4. check the NVR screen motion detection icon and try playback (Please refer to your NVR’s manual for NVR’s motion record option.)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>