VIKYLIN NVR 4MP Full Color Night Vision PoE Security System HD Kit 4 Cameras User Guide

VIKYLIN NVR 4MP Full Color Night Vision PoE Security System HD Kit 4

Cameras

NVR Connection Diagram

8 Channel NVR back panel

16 Channel NVR back panel:

Wizard Setup

The configuration wizard will pop up after start-up, please follow the steps below to finish configurations.

Wizard Setup

1. Select language

2. Login system with default account (User name: admin Password: 123456} To prevent your system from being hacked, please set up a password for system for the first time.
   Tips: Write down your password on a notebook in case you forget it !

3. Set a Pattern to unlock your system (you can skip if you don’t need pattern!)

4. Click Next to setup time zone

5. TCP/IP setup (network configuration). Please check in Enable DHCP

How to Play Audio?

• Please click on the channel to select the camera, then click the speaker icon to play audio.

Note

1. If your monitor does not come with a speaker, or does not support audio input via HOM/, it may fail to output audio;
2. Some cameras do not support audio.

Name Your Cameras
Please click on the channel to select the camera, then click the OSD to edit camera name.

Access System Using Mobile Device

Please make sure you’ve connected your NVR to the router directly with an Ethernet cable.

1. Download “Guard Viewer” on your mobile phone from Apple App Store or Google play; You can also scan the QR code below to download the mobile app.
2. Go back to the monitor which is connected with your NVR Box. Please right click your mouse on the monitor and choose Main menu➔ Network➔ Basic➔ P2P, make sure Enable P2P and Add Without Signup are checked in.
3. Open Guard Viewer and click Sign up to register an account.
4. Type in your E-mail address and click Verify. Then type in the verify code you received in your email and click Next.
5. Set a password for your account and check in I have read and agree to«Service  Agreement». Click  Sign Up  to register account.
6. Click on the top left and choose Devices
7. Click +Add and Scan to scan the QR code on the monitor which is connected with your NVR system (Please right click your mouse on the monitor and choose Main menu-+ Network-+Basic-+P2P to get the QR code).
8. Type in a name of your device and click on the top right corner to save the device.
9. Wait for about 1 minute, then click on your device and choose Start Live View to view live video.
10. Select one camera and click to enable audio
11. Click Playback on the bottom of the page to playback video

Access System Using PC Client Software

1. Download the PC client software on Windows PC or MAC and install Guard Station
   Add Device
   Windows PC: Add Cloud Device
   

   • Launch Guard Station, go to Control Panel. Click Device Management to add device
   • Click Cloud Device and Register to register a cloud account (If you’ve already registered an account on your mobile app Guard Viewer, please login with the account directly).
   • Type in user name, password, email address and the verification code and click Sign up to sign up an account.
   • Click +Add Device to add device
   • Input the Register Code and set a name for your device. Click Add to add device. (How to get Register Code?  – please right click on the monitor which is connected with your NVR system and choose Menu-> Network-> Basic-> P2P to get the register code)
   • Go back to your PC client software Guard Station and login with the account you registered.
   • Go to Live Preview page and double click the device to view video
   • For audio cameras, please move mouse to the channel, an icon bar will show up, then click the speaker icon to play audio.

MAC PC: Manually add via serial number

• Launch Guard Station, login with default account. (User name: admin Password: 123456)
• Click Device Management to add device
• Click Cloud Device and Register to register a cloud account {If you’ve already registered an account on your mobile app Guard Viewer, please login with the account directly).
• Type in user name, password, email address and the verification code and click Sign up to sign up an account.
• Click +Add Device to add device
• Input the Register Code and set a name for your device. Click Add to add device. (How to get Register Code? – please right click on the monitor which is connected with your NVR system and choose Menu-> Network-> Basic-> P2P to get the register code)
• Go back to your PC client software Guard Station and login with the account you registered.
• Click Menu on the left top and choose Live View
• Double click your device to view live video
• For audio cameras, please move mouse to the channel, an icon bar will show up, then click the speaker icon and uncheck Silent to play audio.

Access System Using Internet Explorer

1. Find the Register Code of your device: Right click your mouse on the monitor-> Menu-> Network-> P2P;

2. Type in www.star4live.com in your IE browser bar;

3. Login with the account you registered on mobile app Guard Viewer or PC client software
   Guard Station. (If you didn’t register an account before, please click Sign up and follow the Step-c to Step-eon page 11 to register an account and add device)

4. Download web plugin, close your browser and install the web plugin;

5. Go back to www.star4live.com and login again. Click Access to go to the live view page.

6. Download another web plugin and refresh the page.

7. Drag your cameras one by one to the windows on the right side to view video

Recording Setup

please right click your mouse on the monitor which is connected with your NVR system and choose Menu-> Storage-> Recording to set up recording

• Normal Recording {24*7 Full Time Recording+ Motion Recording) This is the default record mode. The system will record continuously. When you check the recording in playback page, it will mark the motion recordings in orange. In this mode you won’t miss any moment.

Motion Recording

1. Click Motion on the right side, then press the left button of your mouse and drag your mouse to select time period.
2. Click Copy on the lower left and choose All and OK to copy settings to all the channels.

Set Motion Area

1. Please right click your mouse on the monitor and choose Main Menu- Alarm- Motion.
2. Select a camera and click Clear All, then press the left button of your mouse and drag your mouse on the image to select motion area.
3. Click Apply to save changes.

Scheduled Recording

1. Click Edit on the right side.
2. Select a day.
3. Uncheck All Day
4. Manually set time period and choose record mode for each time period.
5. Click OK to save the changes.

Vedeo Playback

Playback on NVR

1. Right click your mouse on the monitor and choose Playback
2. Select camera and date on the left side.
3. Click the play icon to playback.

Playback via IE browser

1. Type in www.star4live.com in your IE browser bar and login with your account (ff you didn’t register an account before, please click Sign up and follow the Step-c to Step-eon page 11 to register an account and add device).
2. Click on Access and go to Playback page, then select camera and date on the left side, click play icon to playback.

Playback via PC client software Guard Station

1. Open your PC client software, go to Control Panel and click Playback
2. Select Recording Playback mode {default is Normal Recording Playback).
3. Check in your device and select date, click Search to playback.

Video Backup

Attention: Please use “PotPlayer” for windows PC and “VLC” for MAC to play the video you back up from the NVR system.

Backup on NVR

1. Insert a USB disk into the NVR USB port. Right click your mouse on the monitor and choose Main Menu-> Backup; Select camera, date and time, then click Search.
2. Then a window will pop up, click Backup to continue.
3. Choose USB disk, select a folder and click Backup to back up video.

Backup via IE browser

1. Run Internet Explorer as administrator, type in www.star4live.com in your IE browser bar and login with your account (If you didn’t register an account before, please click Sign up and follow the Step-c to Step-eon page 11 to register an account and add device).
2. Click on Access and go to Playback page.
3. Click download icon behind the camera and select camera, date and time. Then click Query. Check in the files you want to back up and click Download to back up video.

Backup via PC software Guard Station

1. Open your PC client software, go to Control Panel and click Playback
2. Cllck on the lower left corner.
3. Click on By File, check in your device, select time and click on Search. Then select files and click Download to back up video.
4. Click on on the lower left corner to check the downloading process.
5. Click on to open the folder and find the files you downloaded.

Mobile App and Email Notification

Mobile App alarm

1. Open mobile APP Guard Viewer, click on the top left corner and choose Alarm Notification-+Allow Notification, enable notification of your system.

Set Alarm Schedule for App Alerts
(default is 24*7 for all the cameras, all type of alerts)

• Click on Advanced Settings-+ Channel to select camera;
• Click Time to set Start time & End time (click +Add to add more time period) and select day;
• Click Type to select alarm type and click on the top right corner to save the schedule.

iPhone: Me >General >Push Notification

Android phone: Settings- > Notifications-> Allow Notifications.

E-mail Notification

1. Right click your mouse on the monitor which is connected with your NVR, choose Main menu➔ Network➔ Basic➔ Email. Type in the information of your sender and recipient and click Apply.

Click Test to verify the email settings. (please check with your email supplier if you have troubles in email SMTP configuration)

Set Alarm Schedule for Email Alert (default is 24*7 full time)

• Click behind Arming Schedule, select day, set time period and click Apply and OK to save schedule.
  Check in day behind Copy To to copy schedule to other day.

• Click Alarm → Motion, select camera and click  behind Trigger Act

• Check in Send Email and click Apply and OK.

Tips: You just enabled Send Email for the selected camera, please select other cameras and do the same steps to enable Send Email for other cameras.

Please take a photo of the page and email it to to get security code to reset your password.

To get more support or user manual please go to or email us at

Intelligent Smart VCA functions

• Intelligent Smart VCA functions
• NVR VCA Capabilities:
  • Face Recognition Face Detection Face Comparison
  • Perimeter Protection Cross Line Intrusion Detection Enter Area / Leave Area
  • Mixed-Traffic Detection Vehicle Detection Human Body Detection
  • People Counting People Flow CountingCrowd Density Monitoring Counting Report
  • Exception Detection & Statistics Defocus Detection Scene Change Detection Object Removed Object Left Behind Auto Tracking

Note:
Different camera models may have different functions, the pictures above are for reference only. If you have any questions about VCA contact your supplier.

Human Body Detection

Vehicle Detection

Intrusion Detection

VCA playback
Go to Start -> Playback or right-click menu Playback to get into the playback interface, select Video Retrieval for VCA type event video search.

Note:
Different camera models may have different functions, the pictures above are for reference only. If you have any questions about VCA contact your supplier.

Reset Passward

1. Click Forget Password
2. Open Guardviewer APP, goto Me-> General-> Forget Device Password,Scan the QR code to get the code by email.

Note:
If you input a wrong email address or no Email show, please send the picture back to your supplier for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>