HYUNDAI HHA632301 Smart Doorbell User Manual

HYUNDAI HHA632301 Smart Doorbell

USER MANUAL

Thank you for purchasing the HYUNDAI Smart doorbell.

Please read this user manual carefully to fully understand the usage of the doorbell. Keep the manual for future reference since it contains important information.

PARTS DESCRIPTION

1. Camera lens
2. Photosensitive
3. Indicator light
4. Fill-in light
5. Doorbell
6. Horn
7. Charging port
8. TF Card

9. Reset key
10. Indicator light
11. Speaker
12. Volume size
13. USB plug port
14. Indicator light
15. Speaker

CONNECT WITH HYUNDAI HOME APP

To control the smart doorbell you can use the HYUNDAI Home APP on your phone or tablet.
Scan the QR Code to download the APP: HYUNDAI Home. If you can’t scan the QR code find the app “HYUNDAI Home” in the app store on your device.
Create an account to start using the APP. If you already have an existing account, enter your login details to continue.

SET UP YOUR ROUTER

This device only supports 2.4GHz frequency band router, does not support 5GHz frequency band router, please set the relevant parameters of the router before WiFi configuration, WiFi passwords do not include special characters such as ~!@#$%^&*(). When the device is configured in WiFi, the mobile phone and device are as close as to the router, which can speed up the configuration of the device.

ADDING A DEVICE

1. Turn on the bluetooth and location permission functions of the mobile phone

2. Press the doorbell button to start the device and the work indicator blinks. The device enters the network mode.
3. Open the APP, enter the “Home page”, click “+” on the upper right corner of the page, the APP will automatically scan and discover the device, click “Add”.

Note:
A. If the device is not automatically searched, please click
“Turn on Bluetooth” in the picture below and set “Allow device permissions near this application”.

B. Access permission management, enable WLAN, Bluetooth, and nearby devices and select Always, Allow.

4. After adding a doorbell, enter you 2.4Ghz wireless network account and password and click “Next”. When connecting, keep your router, mobile phone and doorbell as close as possible. After adding a doorbell click “Finish”. (Note : if the connection is not succesful, please reset the device and reconnect)

5. Fully charge the device and install it within the stable and effective range of WiFi signal. The smart doorbell host is succesfully added.

DOORBELL AND DING DONG MATCHING

1. Power on the Ding Dong machine (left)
2. Long press the pairing button of Ding Dong machine for 3 seconds (as shown in the picture), and the indicator blinks.
3. Press the doorbell button (right), Ding Dong machine rings than the match is succesful.

MOBILE MESSAGE PUSH

Enter mobile phone – settings – notification and status bar – Application notification management, open APP notification permission, enable notification, suspension, lock screen, sound reminder and other notification functions. (Note: Due to different mobile phone models, the operation interface and options are different, please choose independently).

FUNCTION INTRODUCTION

1. Message push: When visitors ring the doorbell, the mobile phone will receive the APP push message, click the push popup to enter the video call.

2. Video call: Hold down the microphone key to talk to each other, open the speaker to listen.
3. Doorbell sharing: Enter the real-time interface of APP, click Settings – Share device – Add Share – enter the registered account.
4. Low battery reminder: When the battery is low, the APP will push low battery reminder, please charge in time.

MATTERS NEEDING ATTENTION

• The device is a low-power doorbell. When no one rings the doorbell, the device goes into hiberation and goes offline, which is normal.
• The push settings vary according to mobile phone models. Set the settings as required.
• Only 2.4G WiFi is supported, but 5G or WiFi with special symbols is not supported.
• Do not install the device on a metal wall, because it may interfere with WiFi signals.
• The device supports TF card video storage. Do not insert or remove the memory card when it is powered on to avoid loss.

SPECIFICATIONS

• CPU+Sensor: BK+0328
• APP: Hyundai/Tuya
• Resolution: 480P/15frames
• Sensor angle: 125°wide angle
• Night vision: 2pcs 850nm 28Mil night light
• Distance Recording: 1-5Meters
• Video speed: 30W/7fps
• Battery capacity: Polymer lithium-ion 1000MAH, 2-3months standby
• WIFI connection: 2.4GHz wifi,support(802.11 b/g/n)
• Support SD card storage (not included): up to 64 GB
• Wake up method: by the buttom of the doorbel
• Waterproof level: IP54

CHIME

The HYUNDAI Video doorbell can operate together with the Chime. For more information or purchasing the Chime please go to www.hyundaihome.nl or www.alleenonline.nl

CUSTOMER SUPPORT

Please visit www.hyundaihome.nl or www.alleenonline.nl for downloading the e-Manual or for contacting customer support.

© 2022 The Investment Company Europe B.V. HYUNDAI is a trademark of HYUNDAI Corporation holdings, Korea. Licensed to The Investment Company Europe B.V. All rights reserved.
Licensed by HYUNDAI Corporation Holdings, Korea. Imported/Distributed by The Investment Company Europe B.V. exclusively developed for sales in the Netherlands, Belgium, and Luxembourg.

PATENT PENDING

The artwork and design of this package are protected by European copyright law and may not be reproduced, distributed, displayed, published or used for any purpose without prior written permission. It is not permitted to alter,
or reproduce any trademarks or copyright notice from this package.

NL / EN – www.alleenonline.nl

BE / FR – www.alleenonline.be

Specifications:

• Brand: HYUNDAI

• Model: HHA632301

• Product: Smart Doorbell

• Compatibility: HYUNDAI Home APP

• Frequency Support: 2.4GHz (not compatible with 5GHz)

• Features: Camera lens, Photosensitive sensor, Indicator lights,
  Fill-in light, Horn, TF Card slot, Reset key, Pairing key, Volume
  control, Music toggle, USB plug port, Speaker

FAQ:

Q: What should I do if my device doesn’t connect successfully?

A: If the connection fails, reset the device and try reconnecting by following the setup steps again.

Q: The camera cannot be previewed properly?

A: Check whether the network is normal, you can place the camera close to the router, if not, it is better to reset the camera and add it again.

Q: Why is it still in the list of devices after reseting?

A: The reseted camera only resets the network configuration of the camera, but cannot change the configuration in the App, remove the camera in your account,need to add again.

Q: How to cut the camera network to other router?

A: First remove and reset the camera in your App account and then configure your camera again by the App.

Q: Why doesn’t the camera identify the SD card?

A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.

Q: Why I can’t get the notifications with my cell phone App?

A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.

References

• Alleenonline.nl – Alles voor thuis
• Alleenonline.nl – Alles voor thuis
• Alleenonline.nl – Alles voor thuis

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>