Streamine Clawfoot Bathtub Installation Guide

OWNER’S MANUAL & INSTALLATION GUIDE

READ THE ENTIRE INSTALLATION GUIDE PRIOR TO INSTALLING THE BATHTUB THIS BATHTUB SHOULD ONLY BE INSTALLED BY A CERTIFIED PLUMBER

CAUTION! TWO PEOPLE ARE REQUIRED TO LIFT THE BATHTUB

QUESTIONS ON PRODUCT, INSTALLATION, RETURNS? PLEASE CONTACT

streamlinebath.com
[email protected]
1 (323)-612-8011

WARRANTY

RETURNS
We thank you for your purchase. Here at Streamline®, our goal is to provide customers with exceptional bathroom and kitchen products. We understand that things sometimes don’t work out. If you are unsatisfied with your Streamline® product and would like to initiate a return, please reach out to [email protected]. We continue to grow and want to offer the best customer experience possible, and by reaching out to us prior to initiating a return, we can ensure that these issues do not continue in the future.

LIMITED WARRANTY EXCLUSION
ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR  PURPOSE ARE HEREBY DISCLAIMED. STREAMLINE IS NOT LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SIMILAR DAMAGES  INCLUDING, BUT NOT LIMITED TO, LOST PROFITS OR REVENUE, INABILITY TO USE THE PRODUCT, OR ANY OTHER ASSOCIATED EQUIPMENT,  THE COST OF SUBSTITUTE EQUIPMENT, AND ANY CLAIMS BY THIRD PARTIES RESULTING FROM THE USE OF THIS PRODUCT.

This warranty gives you specific legal rights, and you may have other rights that vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions stated above may not apply.

WHAT IS NOT COVERED UNDER THIS LIMITED WARRANTY

• Normal wear and tear or cosmetic damage.

• Damage due to accidents, misuse, physical force, improper installation or operation,
  mishandling, neglect, fire, heat, water, humidity, liquids, insect infestation, or other intrusions.

• Products that have been repaired, altered or modified by anyone other than Streamline® or its authorized service representative.

• Damage caused by use of non-Streamline® accessories or misapplication.

• Products whose serial numbers have been removed, altered or rendered illegible.

• Products purchased, shipped from, used or serviced outside the United States.

• Damage caused by acts of nature such as, but not limited to, lightning damage.

• Products returned without valid proof of purchase.

DELIVERIES
Immediate inspection is required when receiving Streamline® items. It is important to notate any damage or carton count discrepancy on the BOL / Proof of Delivery (POD) receipt when you sign for the delivery, even if the package appears only slightly damaged. If the driver doesn’t allow or won’t wait, notate on the BOL / POD “Driver will not  allow inspection.” Damages should be reported to Streamline® within 3 calendar days of delivery.

Customers who sign for delivery and do not provide proper detailed descriptions assume responsibility if merchandise is damaged or missing cartons. If the product itself appears significantly damaged, you may refuse delivery after you notate it on the POD / BOL and provide clear pictures to Streamline®. Please notify Streamline® of refusal so we can anticipate the return and send out a new item.

Please look for the following when checking:

• Carton/Pallet Count
• Crumpled and pushed in areas
• Fork lift punctures
• Holes
• Any additional outside damage to packaging

ESTIMATED SHIPPING & TRANSIT TIME
We do our best to provide you with accurate shipping times for our products. The times are estimates only. Estimated transit time will not include the time it takes for the item to be processed. Products that are in stock normally ship from the warehouse within 1-2 business days, however these products are subject to prior sale and availability and lead times are not guaranteed.

Estimated shipping time is between 2-10 business days (the actual number will depend on the state and customer availability for delivery). These shipping times are not guaranteed. If you have a time-sensitive project we recommend that you contact a customer service representative at [email protected].

DAMAGE & DEFECTIVE GOODS POLICY
At Streamline®, we understand that a product may get damaged in transit or, on occasion, there may be a manufacturer product defect. Rest assured, we will stand behind you during this process and make sure we do everything we can to bring it to a satisfying and timely conclusion.

For us to offer this level of service, however, we need a little help from the customer in the form of a detailed product inspection immediately upon delivery. In this case, it is important to notate any damage on the BOL or POD when you sign for the delivery. Also, please provide clear photos of the damages to Streamline®. If the driver doesn’t allow or won’t wait notate on the BOL / POD “Driver will not allow inspection.” All damages should be reported to Streamline® within 3 calendar days of delivery.

REPLACEMENT PARTS
Replacement parts are sent at Streamline’s® sole discretion. For us to determine if replacement parts are necessary, please provide us with a clear description of what the issue is as well as supplementary photos for us to better serve you and understand the problem. Whether any additional fees or charges are to be assessed with respect to replacement parts will be determined on a case-by-case basis.

INCORRECTLY SHIPPED ITEMS
If the item received was incorrectly shipped or missing any component parts, please
contact us immediately at [email protected]

DAMAGES & REFUSING A FREIGHT SHIPMENT
If the shipment is damaged, a customer has the option of refusing the shipment. Contact our customer service representative immediately at [email protected]  when and if you refuse a shipment. Also, proper notation must be on the BOL / POD receipt.

Any external evidence of loss or damage that occurred during transit is considered visible loss or damage and must be noted on the BOL / POD and signed by the carrier’s agent (driver). Failure to adequately describe the visible loss or damage could result in the carrier delaying or refusing to honor the freight claim.

Any damage that occurred during transit that was not visible at the time of delivery is considered concealed loss or damage. Due to rough handling in transit, it is possible to damage the contents of a carton without damaging the outer packaging itself. If such a situation occurs, it is important to contact Streamline® immediately for instructions on how to handle this.
You must open all received boxes and inspect products for concealed damage within 72 hours (3 calendar days) of delivery and Streamline® must be notified at that time. After this time frame claims may not be honored.

Streamline® reserves the right to replace any damaged merchandise within 3 calendar days of notification by the customer. If a replacement item is available for shipping within that time period, then a refund cannot be issued. If no replacement is available, the damaged item(s) will be refunded in full if the damage was the fault of freight carrier, and all return procedures were followed. Failure to follow return procedure for the damaged item may result in a charge for the
free replacement item.

LIMITED MANUFACTURER’S WARRANTY [BATHTUB]
All parts and finishes of Streamline® bathtubs are warranted to the original consumer purchaser to be free from defects in material and workmanship for a period of two to five years [depending on model; please check the product listing or email us at [email protected]] after the date of original retail purchase. Proof of the original purchase is required to obtain a remedy under this limited warranty. Streamline® recommends using a professional plumber for all installation and repair.

Streamline® will replace, free of charge, during the warranty period any part or finish that proves defective in material and/or workmanship under normal installation, use, and service. Replacement parts may be obtained by emailing us at [email protected]

This warranty is extensive in that it covers replacement of all defective parts and even finish, but these are the only two things that are covered. Labor charges and/or damage incurred in installation, repair, or replacement as well as any other kind of loss or damages are excluded. Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to Streamline® for all warranty claims. This is the exclusive warranty by Streamline®, which does not make any other warranty of any kind, including the implied warranty of merchantability.

This warranty excludes all industrial, commercial and business usage, whose purchasers are hereby extended a one-year limited warranty from the date of purchase, with all other terms of this warranty applying except the duration of the warranty.

Any damage to this faucet as a result of misuse, abuse, or neglect, or any use of other than genuine  Streamline® replacement parts will void the warranty.

LIMITED MANUFACTURER’S WARRANTY [FAUCETS]
All parts and finishes of Streamline® faucets are warranted to the original consumer purchaser to be free from defects in material and workmanship for three years from date of purchase. Streamline® recommends using a professional plumber for all installation and repair.

Streamline® will replace, free of charge, during the warranty period any part or finish that proves defective in material and/or workmanship under normal installation, use, and service. Replacement parts may be obtained by emailing us at [email protected] This warranty is extensive in that it covers replacement of all defective parts and even finish, but these are the only two things that are covered. Labor charges and/or damage incurred in installation, repair, or replacement as well as any other kind of loss or damages are excluded. Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to Streamline® for all warranty claims. This is the exclusive warranty by Streamline®, which does not make any other warranty of any kind, including the implied warranty of merchantability.

This warranty excludes all industrial, commercial and business usage, whose purchasers are hereby extended a one year limited warranty from the date of purchase, with all other terms of this warranty applying except the duration of the warranty.

Any damage to this faucet as a result of misuse, abuse, or neglect, or any use of other than genuine Streamline® replacement parts will void the warranty.

PRIOR TO INSTALLING

These products must be installed by a fully insured and licensed plumber only.
Installation of any product by anyone other than fully insured and licensed plumber shall void limited warranty.
We are not responsible for any local code compliance for this product.
Building and plumbing codes may vary state-to-state.
Streamline shall not be held liable for any and all incidental damages or flood caused due to use of this product.
Streamline shall not be held liable for any and all fees stemming from cost of installation, re-installation, removal, subsequent damage, or transportation in a case of a product defect.

TOOLS REQUIRED

WHAT’S IN THE BOX

Please note:
Different bathtub models have different drain & clawfeet models. Please see the next page to determine which drain or clawfoot model applies to the bathtub model that you have purchased.

DRAIN MODEL COMPATIBILITY

FREESTANDING BATHTUB

DRAIN DIAGRAMS

Model: N-DWF-GLD
Model: N-DWF-CH

CLAWFOOT CONFIGURATION

Clawfeet: R-CFL03, R-CFL04, R-CFL06, R-CFL-20 have specific foot placement. Each foot in the set is unique. Inside each foot is labeled with a letter to help you find the proper location on the tub for installation. Match up the letters on the clawfeet with the letters on the underside of the tub. The letters on the tub will be the same as what are on the clawfeet and will match accordingly.

APPLICABLE MODELS

CLAWFOOT DIAGRAM

BATHTUB INSTALLATION

1. Ensure that the floor at the installation site has sufficient floor support and is level.
   

2. Waterproofing the floor is highly recommended.
   

3. Determine the location of the drainpipe on the floor by taking measurements of the drain and waste location underneath the unit. Clean the drain hole area in preparation for setting the drain. The area should be dry & free from any debris.
   

4. Remove the bathtub from its box. It is recommended that the bathtub is carried by a minimum of two people. Ensure to carry and set down the bathtub only in the upside-down position.
   

5. Gently place the bathtub in the upside-down position on a tarp or cardboard sheet in order to avoid contact with any rough surface.
   

6. Take (1) adjustable foot [#1], place it through the hole in the clawfoot [#2],
   

7. Place (1) rubber washer [#5] and place it over the bolt [#6]

8. Take the clawfoot [#2] and place it over over the rubber washer [#5] and bolt [#6].
   

9. Take one washer [#4] and place it over the clawfoot [#2] and bolt [#6].
   

10. Take (1) nut [#3] and place it over the washer [#4].
    

11. Make sure to adjust the clawfoot so that it fits snug with the bolts on the bathtub. This will help to ensure that the clawfeet are placed correctly and are functioning properly.
    

12. Tighten the nut [#3] with a wrench and adjust the clawfoot as needed. Repeat for the other 3 claw feet.
    

13. Take the strainer, place silicone sealant around it, and then place it into the drain hole ensuring a tight connection with the drain ell & gasket. Use silicone sealant. DO NOT use plumber’s putty to seal.
    

14. Insert the tailpiece into the trap inlet using the O-ring, coupling nut, & flange. The tailpiece may need to be cut for proper fit. 1”-2” of the tailpiece shoudl fit inside the trap. Slip the flange over the tailpiece and slide down to the floor.
    

15. Assemble the tee section to the tailpiece, overflow, & drain ell using the coupling nuts and O-rings that are provided.
    

16. Attach the tapered rubber gasket to the overflow ell. Align the overflow ell with the overflow hole & secure the drain to the tub with overflow plate and screw provided.
    

17. Make sure a watertight seal exists on all bath drain connections.
    

SINGLE HANDLE FREESTANDING
TUB &SHOWER FAUCET
H-140-TFMSHCH

RECOMMENDED TOOLS

ATTENTION : for easy installation, you will need:
1. To read all the installation instruction completely before beginning.
2. To read all the warning, attention, and maitenance information.

THE TOOLS MIGHT BE APPLIED TO THE FOLLOWING PLACES:

FAUCET INSTALLATION

1. Drill one hole of 130mmx130mm max and drill 3 holes with 80mm diameter as shown.
   

2. Align the base ① with the holes exactly as shown.
   

3. Insert the expansion anchors ① into the holes on the base ② with a hammer, tighten with adjustable wrench.
   

4. Tighten the shower holder ① into faucet body ④ with a screw ② and Allen key ③.
   

5. Slide the flange ④ into the welded rack ③ as shown, and connect the flexible hose ② to the faucet body ①, Then assemble the welded rack ③ to the faucet body ① and fix it with screws ⑤.
   

6. Connect flexible hose ① to the connector ② correctly as shown,tighten with adjustable wrench.
   

7. Insert 3 screws ② into holes on the plate ④, Tighten with Allen key ③.Cover it with flange ①.
   

8. Assemble the shower hose ③ to hand shower ② and connector under the shower holder ① as shown. Then finish the installation of the faucet.
   

CHECKING AND TESTING

1. Remove the aerator ② with aerator wrench, take out the o-ring ① too.Turn the faucet handle all the way on, turn on hot and cold water supply and flush water lines for one minute. Reinstall aerator with aerator wrench.
   

2. Check all connections at arrows for leaks, re-tighten it if necessary.
   

MAINTENANCE

A. If there is splash or low flow rate,please remove the aerator with the wrench and clean the debris.

B. If faucet leaks from the handle or drips from spout, please replace cartridge following the following steps:
1. Remove the handle screw with Allen key ③, take out the handle ①, then remove the trim cap ④.

2. Unscrew the cartridge locknut ① with Adjustable Wrench, then take out the old cartridge ②.

3. Place a new cartridge in the cartridge seat, then screw the cartridge locknut and assemble the handle by securing the screws.

CLEANING AND CARE

Daily cleaning and care are required in order to keep the product shining and properly working.
1. Clean it with water and dry it with soft cloth.
2. Clean the product with gentle liquid or glass cleaner.
3. Don’t use acid cleaner.
4. Don’t clean with abrasive material, abrasive paper or knife.

PARTS LIST

References

• Streamline | Kitchen and Bathroom | Bathtubs, Vanity Tops

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>