cossiga GOGRF9 GOG Tower Counter User Guide
- June 1, 2024
- cossiga
Table of Contents
GOG TOWER TOWER COUNTER SERIES
GOGRF9 GOG Tower Counter
RF GOGRF9
GOGRF12
GOGRF15
- Double glazed, condensation free, glass on glass construction
- Sliding double glazed rear doors argon filled
- Deck forced refrigeration
- Double glazed with painted edges
- Adjustable glass shelf (additional shelf available)
- Ticket strips on shelf and deck
- Under shelf and canopy LED lights
- Integral condenser, self evaporating
HT GOGHT9
- Deck forced heating
- Single glazed glass with front tilting hinged glass
- Sliding glazed rear doors
- Deck forced heating
- Two adjustable shelves
- Ticket strips on shelf and deck
- Under shelf and canopy LED lights
CABINET DIMENSIONS & SPECIFICATIONS
Maximum shelf load weight 15kg spread evenly
CORRECT AIRFLOW| IN CORRECT AIRFLOW
- Blocked air flow will retard operation on both HOT and COLD units
- Ensure trays or plates are not blocking air flow at rear
Locations to avoid
- Close to shop front exterior
- In an outside location
- In direct sunlight
- In a high wind
- Near any source producing excessive heat
- Service units more frequently in dusty or polluted areas
Environmental conditions
Heat from other equipment and natural conditions, such as direct sunlight
straight on units, can cause cooling to fail and overload compressor
EXTRACTION FAN
- Extract hot air from box joinery
- Fan and power cable supplied, screw fixed to joinery
- Electrical power cord 2000mm 3 pin 10 amp 1 phase socket required
- Fan 230v ~ 50Hz – 60Hz – 19 Watt in stainless steel case
- Cossiga part number X000611 Extraction Fan
VENTILATION GRILL
- Stainless steel construction
- Hole cut out size 540 mm x 298 mm
- Cossiga part number X000765 Ventilation Grill Screws not included
THESE UNITS ARE HEAVY AND REQUIRE LIFTING INTO BENCH TOPS
◁ REMOVE
To reduce weight remove
– All doors
– Shelving
– Base plates
▷ PLAN AHEAD
– Have plenty of labour on hand
– Use a mechanical lifting device – optional
– Check bench top hole measurement
– Ensure enough clear depth in cabinet work
– Protect bench top with a mat or similar
– Pre-adjust unit feet if needed
All accepted local safety work wear and standards should be adhered to with a safety programme developed before undertaking of this kind of lifting work
Date Modified: 13/05/24 Check website for latest version
Download C.A.D models or contact us on COSSIGA.COM