dyras UH-6675 Ultrasonic Humidifier Instruction Manual
- September 16, 2024
- dyras
Table of Contents
dyras UH-6675 Ultrasonic Humidifier
Product Information
Specifications
- Water tank capacity: 4 L
- Power: 25W
- Power supply: 230 V, 50 Hz
- Adjustable mist output
- Anti-bacteria water tank (plastic material)
- Low energy consumption
- Long using time, up to 16 hours
- LED light
- Automatic waterless protection
Product Structure
- Spray port
- Water tank
- Water tank base
- Knob
- Base
Product Usage Instructions
- Put the product on a stable, flat surface.
- Take off and turn up the water tank, rotate the lid to open, then pour pure water into the tank.
FAQ
What should I do if the LED light is not working?
If the LED light is not functioning, please check the power connection and
ensure that the unit is receiving an adequate power supply.
Instruction Manual
Ultrasonic humidifier
Model: UH-6675
Please carefully read the instructions before using!
SAFETY WARNINGS
- Do not pull the power plug with wet hands, or there might be a risk of electric shock.
- Do not disassemble the product, so as to avoid electric shock.
- Do not scratch, damage, excessively bend, reverse, knot the power cord and do not apply pressure or clamp on heavy objects. Otherwise, it may be caused electric shock, short circuit or fire.
- Do not arbitrarily change different power cord to connect the product.
- Product can only be used indoors.
- Do not use the machine in the vicinity of flammable, corrosive gases and dust.
- This device is not intended for use by people with reduced physical, sensory or mental capabilities (including children), as well as people who do not have sufficient knowledge and experience working with electrical appliances if they are not looked after by persons responsible for their safety.
- The device should be placed on a flat and stabile surface, at a distance of at least one meter from other electrical appliances.
- Do not use much than 4 litre water! Max. capacity is 4 litre.
- If the supply cord is damaged, please contact the manufacturer or the service agent in order to avoid any dangerous situation.
- Please do not disassemble the product yourself!
- Please do not place this product near electric appliances and heat sources!
- Please do not place the product close to water, into water or in damp places.
- Keep it far from babies and small children!
- The device emits max. 250ml of cold steam per hour, any slight condensation on the surface of the device and its direct surroundings is normal. Accordingly, please place the device carefully.
- It is recommended to use distilled water to reduce the incidence of calcification.
- When the appliance is not in use, always keep both the tank and the base dry to prevent bacteria or fungi settle on them!
SPECIFICATION
Water tank capacity: 4 L
Power: 25W
Power supply: 230 V, 50 Hz
Adjustable mist output
Anti-bacteria water tank (plastic material)
Low energy consumption
Long using time, up to 16 hours
LED light
Automatic waterless protection
PRODUCT STRUCTURE
- Spray port
- Water tank
- Water tank base
- Knob
- Base
USING THE APPLIANCE
- Put the product on a stabile, flat surface.
- Take off and turn up the water tank, rotate the lid to open, than pour pure water into the tank. It is recommended to use destiled water to avoid limescale build-up. Please pay attention that the water temperature should not exceed 40°C. The water level should cover at least two-thirds of the water tank.
- Put back and tighten the lid, place the tank onto the base, than switch on the device.
- When power indicator illuminate to BLUE, it means there is enough water in the tank and it is ready to work; when it become RED, it means you should add more water for the device to work.
- According to dryness, rotate the knob to get the right amount of fog for your room.
- When the tank is short of water, the indicator will turn to RED, and the internal safety device to cut off the fog generation process. If you want the device work again, you need to turn off the power and add enough water into the tank.
- How to add water:
- Please add clean and pure water into the tank. The temperature should be under 40 C°. After the tank is filled with water, tighten the lid and wipe the water droplets on the surface with a cloth.
CLEANING AND MAINTENANCE
- Unplug the appliance before cleaning!
- Wipe the outer surfaces of the unit with a damp soft cloth and wipe dry
- Do not use slovents or abrasive cleaners!
- To clean the inside of the watertank, you can add a few drops of citric acid to the water.
- After cleaning, rinse the watertank with warm water and let it dry inside, too.
- We suggest to store the appliance in a plastic bag or in its box if you not operate it for a while, to protect it from dust and dirt.
- Never touch the humidifier with a sharp instrument!
WASTE MANAGEMENT
Correct Disposal of this product
****| This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Manufacturer/Importer: Vöröskő kft., 8200 Veszprém, Pápai út 36.
CE SYMBOL
The mark is intended to indicate that the product complies with the relevant European Union standards and can be freely marketed in the European Union.
No parts of the content (including logos, design, photos, text, colour scheme
arrangements, etc.) may be reproduced, reused or redistributed for any purpose
whatsoever, or distributed to a third party for such purposes, without the
written permission of Dyras Europe Kft.
“dyras” is a registered trademark of Dyras Europe Kft.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>