HOMSHADE HY21LB 10ft Solar Lights Offset Cantilever Patio Umbre User Manual

HOMSHADE HY21LB 10ft Solar Lights Offset Cantilever Patio Umbre

Specifications:

• Product Name: 10-Foot Solar LED Patio Offset Umbrella With Base
• Model Number: HY21LB

Product Usage Instructions

Before First Use:

1. Hold the umbrella upside down and shake gently to separate the umbrella ribs. If necessary, carefully pull the ribs apart to free them.
2. Slowly turn the crank to open the umbrella. Make sure that the ribs are not stuck together.

Product Assembly:

1. Insert the part B crossbar into the part A crossbar.
2. Attach the part C base to the crossbars with four part 1 screws and four part 2 washers.
3. Connect the hooks, remove the plastic film on the solar panelbefore use, insert the battery connector, and rotate the solar panel to the umbrella top.
4. Firmly insert the canopy of the umbrella into the umbrella frame.
5. Insert the umbrella into the part C base and tighten the knob to lock it in place.

To Open the Umbrella:

1. Flip the handle and move the arm up.
2. Lock it in your desired position by sliding the sleeve down to secure the arm.
3. Slowly turn the crank to open the canopy.

To Tilt the Umbrella:

1. Lift the sleeve, flip the handle, and move the arm up/down to adjust the tilt angle of the umbrella.
2. Lock it in your desired position and replace the sleeve.

To Close the Umbrella:

1. Untie the canopy’s strap from the umbrella pole.

To Replace The Battery:

1. Open the lid.
2. Replace the battery with Ni-MH 1.2V 1800mAh rechargeable batteries recommended. Insert the battery in the correct polarity.
3. Cover the lid.

FAQ:

Q: What type of battery is recommended for replacement?
A: Ni-MH 1.2V 1800mAh rechargeable batteries are recommended for replacement.

Q: How do I clean and store the umbrella?
A: [Add cleaning and storage instructions here]

Q: Can I use the umbrella on sandy or loose soil?
A: It is advised not to use the umbrella on sandy, muddy, or loose soil as it may cause instability.

Q: How do I turn on or off the lights on the umbrella?
A: Press the button on one of the umbrella ribs to turn on or off the lights.

Questions? Contact Our Professional Customer
Support at support@homshade.com.

• THE DIAGRAM IS FOR REFERENCE ONLY

NOTICE

• For residential use only.
• Always remove umbrella from its stand when not in use.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
• Do not use umbrella in inclement weather, such as snow, heavy rain, thunderstorms, or strong wind.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the product warranty.
• The umbrella must be secured in place at the bottom using weights. Do not assemble the umbrella on sandy, muddy or loose soil.
• If the crank gets too hard to turn, check if the rope has come off the pulley. lf you continue to turn the crank, the rope or crank handle could break.

BEFORE FIRST USE

1. Hold the umbrella upside down and shake gently to separate the umbrella ribs. If necessary, carefully pull the ribs apart to free them.
2. Slowly turn the crank to open the umbrella. Make sure that the ribs are not stuck together.

CLEANING AND STORAGE

• Wipe clean with mild detergent, warm water, and a soft cloth.
• Do not use abrasive materials or cleaners.
• Store in a dry area shielded from the weather.
• If necessary, cover with a furniture cover or tarp.

PARTS LIST

PRODUCT ASSEMBLY

Insert the part B crossbar into the part A crossbar.

Attach the part C base to the crossbars with four part 1 screws and four part 2 washers.

These accessories are for offset hanging umbrella with base.

STEP 1

Note:
Please mind the insert direction

STEP 2 Use Sand Only

Remove the plastic film on the solar panel before use. Then insert the battery connector.

Firmly insert the conopy of the part D umbrella into the umbrella frame.

Insert the umbrella into the part C base. Tighten the knob to lock it in place.

To open the umbrella

1. Flip the handle and move the arm up.
2. Lock it in your desired position. Slide the sleeve down to secure the arm.
3. Slowly turn the crank to open the canopy.

To tilt the umbrella

1. Lift the sleeve. filp the handle, and move the arm up/down to adjust the tilt angle of the umbrella.
2. Lock it in your desired position and replace the sleeve.

Caution: Avoid fully tilting in windy conditions.

To close the umbrella

To Replace The Battery

STEP 1
Open the lid.

STEP 2
Replace the battery. Ni-MH 1.2V 1800mAh rechargeable batteries recommended. Insert the battery in the correct polarity.

STEP 3
Cover the lid.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>