dyras JE-333X Juice Extractor Instruction Manual

dyras JE-333X Juice Extractor

Product Information

Specifications

• Model: JE-333X
• Power: 800 W
• Input: 220-240 V, 50/60 Hz
• Noise Level: N/A

Product Usage Instructions

1. Power Connection:
   Ensure the product is connected to a power source with the voltage specifications of 220-240V and frequency of 50/60Hz.

2. Operating the Device:
   Follow the user manual to understand the various functions and settings of the JE-333X.

3. Maintenance and Cleaning:
   Regularly clean the product using a damp cloth and ensure it is unplugged before cleaning. Refer to the manual for detailed cleaning instructions.

4. Noise Level:
   The noise level of the product is not specified in the manual. Please observe and adjust usage based on personal comfort levels.

Frequently Asked Questions (FAQ)
Q: What should I do if the device does not power on?
A: Check the power connection and ensure the voltage input matches the product specifications. If the issue persists, contact customer support.

Instruction Manual

Please carefully read the instructions before using!

Juice Extractor
Model : JE-333X

SAFETY PRECAUTIONS

• Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
• This appliance can be used by children aged from 10 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 10 and supervised. Keep the appliance and its cord out of reach of children aged less than 10 years.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
• Children shall not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• This appliance is intended to be used in household and similar applications such as:
  • staff kitchen areas in shops, offices and other working environments;
  • by clients in hotels, motels and other residential-type environments;
  • bed and breakfast type environments.
• Check the voltage on the appliance’s rating plate corresponds to the voltage on your mains supply matter.
• Do not immerse the motor unit into water nor rinse it under the tap, Clean the motor unit with a damp cloth. Do not stand the product on hot or wet surfaces.
• Unplug the appliance before cleaning or when you do not us it.
• If the appliance malfunctions, or if the mains cord or the plug is damaged, please stop using. Return it to the manufacturer or the authorized service agent to repair. Do not take it apart by yourself.
• Do not use the appliance outdoors.
• Do not hang the cord on the table edge. Do not let the main cord touch hot surface or hang down where a child could grab it. Do not let the cord to get wet or rinse in water.
• The appliance is designed for home use, any business purpose use is forbidden.
• The Capacity of the expressed juice does not exceed the maximum graduation of the cup.
• Do not continuously operate too long. The motor may overheat. If the juicer has been used continuously for 5 minutes, it may need time to cool down completely before restarting.
• Regarding the instructions for cleaning surfaces in contact with food read further.
• Your juice extractor is equipped with suction feet. The suction feet will adhere to any smooth surface for them to adhere well, the surface must be flat and also free of dust or grease. The suction feet cannot adhere to a textured surface. Slightly moisten the suction feet before you press them onto the surface
• Do not fix the suction feet to sensitive surfaces. Some paints or synthetic coating may react adversely with the material of the suction feet and soften them This could cause them to leave marks
• Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts
• The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.

PARTS OF THE APPLIANCE

1. Pushing bar
2. Transparent cover
3. Juicing net
4. Middle ring
5. Handle
6. Residue barrel
7. Main machine
8. Juicer jug

PERFORMANCES

1. For the juicer with large diameter, entire apple or pear can be put in for juicing, no cutting apart needed, easy and quick.
2. Design is fine, simple, and beautiful, with combined structure, easy to operate and clean.
3. High speed electric motor with overheating protection is adopted, high efficiency, time saving, energy saving, high service life of the motor.
4. Safety lock unit for switching is specially designed, in order to make sure safety and reliability in use.

BEFORE USING

1. This machine is set with safety unit, when the cover is not fixed properly, the motor cannot turn, so as to ensure safety for the user.
2. When disassembling or assembling the juicer, press the upper of feed port of the cover with your hand, then force the handle to slide in or out of cover slot.
3.  When disassembling juicing net, first remove the cover and residue barrel, then turn the middle ring up to 30 degrees by holding juicing nozzle with your hand, and take up, the juicing net will automatically leave the rotor.
4. In order to avoid damage, before using, first check power supply for compliance with rated voltage.
5. Clean all parts able to disassemble (refer to the section of maintenance and cleaning”).
6. When assembling, please carefully read the diagram of “Parts of the appliance”.
7. Please carefully read the “Attentions” before using.

JUICING

1. Before using, please confirm the button switch of the main machine in stop state, in this way, in case assembly is not completed, starting the main machine can be avoided, so unnecessary damage for persons or property avoided.
2. Before juicing, first confirm juicing net and rotor clutched in position, and no hard contact between juicing net cutter and transparent cover. Put the transparent cover on, put the handle into the cover slot, then turn on the machine.
3. For using, assemble according to the diagram of “Parts of the appliance”. Turn on power supply, press switch to let the machine run no-load for 5 sec. Put prepared vegetable or fruit into feed port of the juicer, press with the pushing bar, evenly, hard and slowly, juice of the vegetable or fruit can be found, original, fresh, good for health.
4. Note: when pressing food with the pushing bar, force shall be even or indirect, pressing force shall not be more than 1 kg, no too sudden force, otherwise, juicing effect will be reduced.

OPERATING TIME

This machine is designed with button switches of:

• O grading: stop
• I grading: for weak grading
• II grading: for strong grading

For juicing, select strong grading, for operating time, after operating for 1min, stop for 1min, then use again. After the above operation is performed for three times, stop for 15 min, do not operate until the motor is cooled, in this way, service life of this machine will be prolonged, the machine will serve you more efficiently.

The uniform or indirect compressive force shall not exceed 1 kg.
Do not apply too sudden a force to the push rod!
Keep rest periods at least 15 seconds between two operations!

ATTENTIONS

1. Before juicing, first confirm juicing net and rotor clutched in position, and no hard contact between juicing net cutter and transparent cover. Put the transparent cover on, fasten tight the handle, then turn on the machine.
2.  Before being used, the motor works in running-in phase, there may be slight peculiar smell and spark, this is normal, after the motor works for some period, the above phenomenon will disappear. During juicing, make sure there is not too full juice and residue in the middle seat and residue cup, if too full, please cut off power supply, clean up, then use again.
3.  During using, do not open the cup cover. In case power supply is on, do not put hand or any ware into the mixing cup or feed port, otherwise, harmful accident may occur or this machine may be damaged.
4. In order to prolong service life of this machine, over-temperature protective device is mounted in the motor. If the motor works for a long time or overloaded, when over warning temperature, power supply will automatically cut off. After the motor stops, pull out plug of power supply, wait for the motor to cool (about for 30 min), use again.
5. When this machine works in mixing, mincing or grinding conditions, no-loaded or over loaded work is strictly prohibited.
6. After operation, do not pour the food out until pull out the plug of power supply.
7. Cutters are very sharp, in order to avoid danger, when cleaning a cutter, please put the cutter under water tap for washing, do not wash it with hand.
8. This machine must not be used for others beyond regulated purposes.
9. In case of damaged power supply cord, in order to avoid danger, replacement must be performed by the manufacturer or its service department or similar professional persons.

MAINTENANCE AND CLEANING

1. This machine shall be often used, so as to keep the motor dry and clean.
2. If not using for a long time, please store this machine at a dry and well-ventilated place so as to prevent the motor from being damped and going moldy.
3. Do not wash the main machine. When cleaning, only wipe with wet cloth. Other components may be washed directly with water, such as pushing bar, cover, middle seat, residue cup, juice nozzle cover.

TECHNICAL SPECIFICATIONS

WASTE MANAGEMENT

Correct Disposal of this product

****| This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product forenvironmental safe recycling.

Manufacturer/Importer: Vöröskő Kft., 8200 Veszprém, Pápai út 36.

CE SYMBOL

The mark is intended to indicate that the product complies with the relevant European Union standards and can be freely marketed in the European Union.

References

• Dyras | Fedezze fel a különbséget!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>