OUKITEL MC-4 PV Portable 200W Solar Charger Panel Instruction Manual
- June 1, 2024
- OUKITEL
Table of Contents
Solar Charger
Oukitel: 200W Solar Panels
an instruction manual
Connection Method
How to use
-
Remove the solar panel.
-
Connect the MC4 terminal connector on the solar panel to the PV terminal on the connecting cable. (Sold separately)
-
If solar panels are oriented so that they are constantly exposed to full solar radiation, they can generate electricity more effectively.
The solar panel can also be used in an upright position and should be placed at an anyle of 60-90″ to the ground for charging.
Series and parallel connection methods
Parallel connection
(see diagram below)| 1.Connect the positive and negative poles of the two
solar panels in parallel with the MC4 parallel cable (see diagram below).
2. Connect the sink connector of the MC4 parallel cable to the MC4- PV
terminal cable.
3. Then connect the MC4-PV terminal cable to the PV port of the product to
charge he product.
---|---
Series connection
(see diagram below)| 1. Connect the positive and negative MC4 connectors of
the two solar charging panels in series.
2. After series connection, connect the positive and negative of the
remaining two MC4 ports with the MC4 to PV terminal cable.
3. Next, connect the MC4 to PV terminal cable to the PV port of the main
product to charge the product.
4. For use in series: no more than four 200 W solar panels.
---|---
200W solar panels
Maximum power output: 200W (+/-5W)
Open circuit voltage: 25 V (23.5 V under load)
Short-circuit current: 11.4 A (load current 10.5 A)
Rated voltage: 21V
Freeze current: 9.5A
Efficiency: > 22%
Battery type Type: monocrystalline silicon
Connection method: MC4
Operating temperature: +25°C (-10° C to 65° C)
(technical) specification
Weight: 7 kg
Developed size (Lx Wx D): 536 x 2349x25mm
Storage size (LxWxD): 536x618x54mm
Warranty: 12 months
Safety certification
Precautions.
- Do not bend the solar panel (do not bend it lower than a 30° angle) as this may cause damage.
- The solar panel is IPX4 waterproof, but please do not use in water or rain.
- When dirty, please avoid washing with water and wipe with a cloth.
- Please avoid use and storage near fire and heater.
- Please do not damage the product with nails or sharp objects and avoid stepping on it.
- Disassembly is prohibited.
- Avoid the use of corrosive chemicals.
Frequently asked questions
Are Rock power solar panels waterproof?
Yes. The surface is IPX4 waterproof but should not be used in water or in the rain
Rockpower 200w ... (no change)
(No change)
USB devices ... (no change)
No. Can accommodate the needs of your device. If your smartphone accepts 1A, the charger will also provide 1A.
If the folding solar panel is not charging the device.
1 (No change) 2(No change) (iii) (No change) (iv) Avoid fire, water and chemicals
Cloudy or in the shade ... (No change)
enquiry
1-year limited product warranty
If you have any questions, please contact us by phone and email
Email enquiries: support@oukitelpower.com