OUKITEL WP 20 Pro Smartphone User Manual

October 27, 2023
OUKITEL

OUKITEL WP 20 Pro Smartphone User Manual

Overview

Product Overview
Product Overview

Accessories

  • Quick Charger
    Charger

  • TYPE-C

  • SIM card pin

Battery

WP20 Pro is included an internal battery.
You can track your battery status with the icon showed on the top right of the screen. As microwave ovens, stoves, or radiators, batteries may explode when overheated.

Battery

Warning

  • Use only OUKITEL-approved batteries specifically designed for your phone. Incompatible batteries can cause serious injuries or damage to your phone.
  • Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.

Basic parameters

  • Display: 5.93″ HD+ I PS To uch screen
  • Operating system: Android 12
  • Processor: 4Cortex-A53 2.0GHz+4Cortex-A53 1.5GHz
  • GPU: IMG GE8320 650MHz
  • RAM: 4GB
  • ROM: 64GB
  • Battery: 6300mAh, Quick Charge

Camera

  • Rear Camera
    20M AF LED Flash

  • Front Camera
    5.0MP

Connection (I/O)

  • Europe Band:
    • GSM: 2/3/5/8
    • WCDMA: 1/8
    • FDD: 1/3/7/8/19/20
  • American Band:
    • GSM: 2/3/5/8
    • WCDMA: 1/2/4/5/8
    • FDD: 1/2/3/4/5/7/8/12/17/18/19 /25/26/28a/28b/66

FM: 87.5 MHz -108 MHz
SIM Card Slot: Dual SIM ,Nano+Nano/Nano+TF Card
Note: Based On Local Frequency Band

Other Features

  • Video: AVI, MP4, WMV, MKV, MOV, ASF, FLV
  • Audio: FLAC, APE, AAC, MKA, MP3, M4A, AMR, ALAC, WAV
  • Image: JPEG, BMP, GIF,PNG

Dimensions

  • Height: 166.2mm
  • Width: 81.2mm
  • Thickness: 15mm Weight: 290g

Package contents

  • 1*USB Cable
  • 1*Charger
  • l*Warranty card
  • 1*Multi-language Manual
  • 1*SIM Card pin

Comes with the GoogleTM app and Google ChromeTM.
Android is a trademark of Google LLC
MANUFACTURER NAME: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD MANUFACTURER ADDRESS: A-SIDE A2 BUILDING 2/F [NET NEW INDUSTRIAL PARK,N0.20 DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,SHENZHEN CHINA

About Device

Manufacturer’s Name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
Smart Phone
Model number: WP20 Pro
Operating Temperature: -10° C to 40° C

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.

  1. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
  2. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 3.The product shall only be connected to a USB interface of version USB 2.0
  3. Adapter shall be installed near the equipment and shall be easily accessible.
  4. The plug considered as disconnect device of adapter
  5. The device complies with RF specifications when the device used at 0mm form your body.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information:
This Mobile Phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
requirements, use accessories that maintain a 10mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

FCC ID: 2ANMU-WP20 Pro

QR Code
http://oukitel.com

Icons

OUKITEL Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals