OUKITEL WP20 Rugged Smartphone User Guide
- June 4, 2024
- OUKITEL
Table of Contents
OUKITEL WP20 Rugged Smartphone
Overview
Accessories
Battery
WP20 is included an internal battery.
You can track your battery status with the icon showed on the top right of the
screen. As microwave ovens, stoves, or radiators,batteries may explode when
overheated.
Warning
- Use only OUKITEL-approved batteries specifically designed for your phone. Incompatible batteries can cause serious injuries or damage to your phone.
- Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.
Basic parameters
- Display 5.93″ HD+ IPS To uch screen
- Operating system: Android 12
- Processor: Cortex-A53 up to 2.0 GHz 4
- GPU: IMG GE8300 @ 660 MHz
- RAM: 2/3/4GB
- ROM: 16/32/64GB
- Battery 6300mAh, Quick Charge
Camera
- Front Camera 20M AF+2 MFF
- Rear Camera 5.0MP
- LED Flash
Connection (I/O)
Europe Band: American Band:
GSM: 2/3/5/8 GSM: 2/3/5/8
WCDMA: 1/8 WCDMA: 1/2/4/5/8
FDD: 1/3/7/8/19/20 FDD: 2/4/5/7/12/17/28a/28b
FM: 87.5 MHz -108 MHz
SIM Card Slot: Dual SIM ,Nano+Nano /Nano+TF Card
Note: Based On Local Frequency Band
Other Features
Video: AVI, MP4, WMV, MKV, MOV, ASF, FLV
Audio: FLAC, APE, AAC, MKA, MP3, M4A, AMR, ALAC, WAV
Image: JPEG, BMP, GIF,PNG
Dimensions
- Height: 166.2mm
- Width: 81.2mm
- Thickness: 15mm
- Weight: 290g
Package contents
- 1″USB Cable
- 1 Charger
- 1*Warranty card
- 1″Multi-language Manual
- 1*SIM Card pin
Comes with the G0ogle app and Google Chrome
Android is a trademark of Google LLC
MANUFACTURER NAME: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY Co., LTD
MANUFACTURER ADDRESS: A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK, NO.20
DAFU INDUSTRIAL zONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,SHENZHEN
CHINA
This device complies with part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However nere is no guarantee that interference will r ina
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption kate (SAR) Information:
This Mobile Phone meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health.
requirements, use accessories that maintain a 10mm separation distance between
the user’s body and the back of the handset. The use of belt clips, holsters
and similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt clips, holsters, and Similar accessories used by this device
should not contain any metallic components.
Body-worn accessories that do not meet these requirements may not comply with
RF exposure requirements and should be avoided. Use only the supplied or an
approved antenna.
FCC ID: 2ANMU-WP20