OUKITEL WP17 WP Series Redefine Outdoor Communication User Manual
- June 4, 2024
- OUKITEL
Table of Contents
WP17 WP Series Redefine Outdoor Communication
User Manual
Accessories
Battery
WP17 includes an internal battery. You can track your battery status with the
icon shown on the top right of the screen.
Warning
- Use only OUKITEL-approved batteries specifically designed for your phone.
- Incompatible batteries can cause serious injuries or damage to your phone.
- Never place batteries or phones on or in heating devices such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.
How to insert the card
-
• To make sure your smartphone is able to call, put the SIM card in the following order. Press the card pin into the side hole and then the card tray pops up and pull out it.
-
Take out the card slot and place the Nano card or Nano card Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
-
with the phone facing up, insert the cardholder into the phone in the direction of the arrow
How to boot
Non-removable battery Press the power button for 3-5 seconds to boot
How to send SMS, MMS
SMS
- Open the SMS app
- Select New Information
- Enter a phone number or browse your contacts
- Select Edit Information and enter your text
- Send
MMS-video
- When writing a text message
- Select images, videos, or other files you want to add, even you can take a new picture or video right away. Selecting or sending
Language switching settings
- Main menu –settings-system setting–language and input method
- Language and input method—language–language adding
- Select the language you need, and the system will automatically jump back to the language interface
- Select the icon after the language bar and drag it to the first one.
SAR
- The maximum electromagnetic radiation absorption ratio(SAR) of this product is < 2.0W/kg
- In line with the requirements of the national standard EN 50360:2017; EN 50566:2017; EN62209-1:2016; EN 62209-2:2010; EN 62479:2010;
Safety-In order to ensure safety using the product, you must strictly abide by the following rules
- The phone should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
- Do not expose the device and other batteries together to high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
- If the device is equipped with a non-removable battery, do not replace the battery yourself to avoid damaging the battery or device.
- Use of an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
- Do not disassemble or reset the battery, insert other objects, or immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
- Do not drop, crush, scratch, or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
- The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
If you want to read the full CE compliance, please check this link:https://www.oukitel.com
Maintenance
- Thoroughly understand the maintenance of this mobile phone to use the mobile phone more safely and effectively, and extend the service life of the mobile phone as much as possible.
- Please follow the instructions in the manual to open the phone, disassemble the accessories, and do not try other methods.
- Please avoid falling, knocking, or shaking your phone. Rough handling of the phone can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
- Do not use chemical solvents or detergents to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or mild soap.
- Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display.
- If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a mobile phone that cannot remove the battery, please press and hold the power button for more than 12 seconds, and the mobile phone will be forced to restart( unlock the phone when restarting) It can solve the general bug; for the mobile phone that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
- When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.
This machine’s standard package (package box –mobile phone–manual–protective
film–USB data cable — charger)
Manufacturer’s Name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO., LTD Smart
Phone Model number: WP17 Operating Temperature: -10° C to 40° C
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 0mm must be maintained
between the user’s body and the handset, including the antenna. Third-party
belt clips, holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or approved antenna. This device is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU. All essential radio test suites have been carried out.
- Use carefully the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
- CAUTION: RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
- The product shall only be connected to a USB interface of version USB 2.0
- The adapter shall be installed near the equipment and shall be easily accessible.
- The plug is considered as a disconnect device of the adapter
- The device complies with RF specifications when the device is used at 0mm from your body
This device complies with part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information:
This Mobile Phone meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluations
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health.
requirements, use accessories that maintain a 10mm separation distance between
the user’s body and the back of the handset. The use of belt clips, holsters,
and similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements and should be avoided. Body-worn
Operation This device was tested for typical body-wom operations. To comply
with RF exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or approved antenna.
FCC ID: 2ANMU-WP15
Manufacturer Name: Shenzhen YunJi Intelligent Technology CO., LTD
Manufacturer Address: A-side A2 Building 2/F Enet New Industrial Park,No.20
Dafu Industrial Zone, Aobei
Community, Guanlan, Longhua New District, Shenzhen China
Comes with the Google™ app and Google Chrome™. Android is a trademark of
Google LLC
https://www.oukitel.corn ****