OUKITEL C25 Smartphone User Manual

October 27, 2023
OUKITEL

C25 Smartphone
User Manual
Most Affordable Cutting -Edge Phone

Overview

OUKITEL C25 Smartphone - Figure 1

Accessories

OUKITEL C25 Smartphone - Figure 3

Battery

C25 includes an internal battery.
You can track your battery status with the icon showed on the top right of the screen When overheated by microwave ovens, stoves, radiators, batteries may explode.

OUKITEL C25 Smartphone - Figure 4

Battery
C25 includes an internal battery.
You can track your battery status with the icon showed on the top right of the screen When overheated by microwave ovens, stoves, radiators, batteries may explode.

basic parameters

Display: 6.517″HD+ incell water drop screen
Operating system: Android ” 11
Processor: Cortex 2 OGHZ_ A75*1+A55 1 8GHZx3
GPU: PowerVR GE8300,800MHz
RAM: 2/3/4GB
ROM: 16/32/64GB
Battery: 5000mAh

Camera

Rear Camera
13M+0.3M+0.3M
Front Camera
8M

Connection (I/O)
2G: 62/3/518 3G: B1/8 (European version) 3G:B2/4/5 (American version) 4G: FDD B1/3/5/7/8/19/20 TDD B40 (European version) 4G:B2/4/5/7/12/17/25/26/28A /288/66 (American version) SIM Card Slot: Dual SIM, Nano/TF Card FM:87.5 MHz -108 MHz
Other Features
Video: AVI, MP4, MKV, MOV, ASF, FLV Audio: AAC/AAC+/AMR/AWB/MP3/WMANORBIS/FLAC/APE Image: JPEG, BMP, GIF,PNG
Dimensions
Height: 166mm Width: 76.8mm Thickness: 9.8mm Weight: 210g
Package contents
1LISB Cable Charger
1
SIM Card pin
1Multi-language Manual
l
Warranty card
Comes with the Google app and Google Chrome
Android is a trademark of Google LLC
MANUFACTURER NAME: SHENZHEN YUN.11 INTELLIGENT TECHNOLOGY CO.,LTD MANUFACTURER ADDRESS: A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK,N0.20 DA FU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,SHENZHEN CHINA

Manufacturer’s Name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Smart Phone
Model number: C25
Operating Temperature: -10° C to 40° C
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.

  1. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
  2. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
  3. The product shall only be connected to a USB interface of version USB 2.0
  4. Adapter shall be installed near the equipment and shall be easily accessible.
  5. The plug considered as disconnect device of adapter
  6. The device complies with RF specifications when the device used at 0mm form your body
    This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not  installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to  try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information:
This Mobile Phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health requirements, use accessories that maintain a 10mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
FCC ID: 2ANMU-C25

www.oukitel.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals