CyberPower PR1000RT2U Smart App Sine Wave UPS Instructions

September 16, 2024
CyberPower

CyberPower PR1000RT2U Smart App Sine Wave UPS

CyberPower-PR1000RT2U-Smart-App-Sine-Wave-UPS-PRO

Product Information

Specifications:

  • GreenPower UPSTM Bypass Technology: Yes
  • Topology: Line Interactive
  • Input Voltage: 100 – 120 VAC
  • Output Power Capacity: 2200 VA / 2200 W
  • Battery Type: Sealed Lead-Acid
  • Battery Quantity: 4
  • Runtime at Full Load: 3.2 minutes
  • Runtime at Half Load: 11.8 minutes
  • Surge Suppression: 2430 J
  • Management: Multifunction LCD, USB Port, SNMP/HTTP Remote Monitoring
  • Form Factor: Rack/Tower, 2U

Product Usage Instructions:

Installation:

  1. Place the UPS in a well-ventilated area.
  2. Connect the input plug to a compatible power outlet within the specified voltage range.
  3. Connect your devices to the battery & surge-protected outlets on the UPS.
  4. Install any necessary management cables for remote monitoring.

Battery Maintenance:
Ensure the UPS is regularly charged to maintain battery life. Replace batteries as needed following the specified guidelines.

Troubleshooting:
Refer to the LED indicators and LCD display for information on UPS status. Contact customer support if you encounter any faults or issues.

FAQs:

  • Q: How do I know if the UPS is functioning correctly?
    A: Check the LED indicators for normal operation status. The LCD display will also provide detailed information on the UPS status.

  • Q: Can I replace the UPS batteries myself?
    A: Yes, the batteries are user-replaceable. Follow the instructions in the user manual for safe battery replacement.

  • Q: Is the UPS compatible with network management systems?
    A: Yes, the UPS comes with a pre-installed network management card for remote monitoring and control via web browsers or network management systems.

Product Introduction

Protect corporate and network servers, telecom installations, and Voice Over Internet Protocol (VolP) systems.

The PR2200RT2UCN is a Smart App Sinewave rack/tower convertible UPS with line- interactive topology, surge protection, and battery backup. CyberPower’s Smart App Sinewave series creates a sine wave output devoid of power gaps which could cause unexpected shutdowns of sensitive equipment.

The Smart App Sinewave PR2200RT2UCN improves battery life through battery equalization technology and Automatic Voltage Regulation (AVR), which corrects minor power fluctuations without switching to battery power. The enhanced chassis design with an easy-to-access toolless front panel, captive screws for battery panel access, and color-coded rear panel make battery changes and installations simple and fast. The PR2200RT2UCN also has an innovative LCD panel that rotates 90°, tilts for a better viewing angle, and provides information on 47 different settings including UPS stats, UPS setup and control management, and testing options.

This model includes pre-installed RMCARD205 network management card for remote management and control via a standard web browser or network management system and built-in cloud monitoring.

With a $400,000 connected equipment guarantee and a three-year warranty, you can trust CyberPower’s commitment to the quality of the PR2200RT2UCN.

TYPICAL APPLICATIONS

  • Department Servers
  • Storage Devices
  • VoIP Installations
  • Network Devices
  • Corporate Servers
  • Telecom Installations

FEATURES

  • Capacity: 2200 VA / 2200 W
  • Topology: Line Interactive
  • Waveform: Sine Wave
  • Output: 100-120 VAC +/- 5%
  • Runtime (half/full): 11.8 minutes / 3.2 minutes
  • Plug type & cord: NEMA L5-30P, 10-ft. cord
  • Outlets: 8 surge + battery backup
  • Outlet types: 8 × NEMA 5-20R
  • Communication: USB, Serial, SNMP, Relay, EPO, Cloud
  • Management software: PowerPanel® Business
  • Remote management: Yes, pre-installed RMCARD205 and built-in cloud
  • Warranty: Three-Year
  • Connected Equipment Guarantee: $400,000
  • ENERGY STAR® certified: Yes

SPECIFICATIONS

GENERAL   INPUT – CONT.
Active PFC Compatible Yes Cord Length
Energy Saving GreenPower UPS™ Bypass Technology Input Frequency Range

– 63 Hz
ENERGY STAR® Certified| Yes| Input Plug Type| NEMA L5-30P
UPS Topology| Line Interactive| Input Voltage| 100 – 120 VAC
INPUT| Input Voltage Range| 75 – 149 VAC
Adjustable Voltage Range| 69 – 155 VAC| Nominal Input Voltage| 100 – 120 VAC
Circuit Breaker| 30A| Plug Style| Straight (Twist Lock)

CyberPower-PR1000RT2U-Smart-App-Sine-Wave-UPS-1

OUPUT

  • Automatic Voltage Regulation Double Boost, Single Buck
  • On Battery Frequency 50 Hz – 60 Hz +/- 1%
  • On Battery Voltage 100/110/120 VAC +/- 5%
  • On Battery Waveform Sine Wave
  • Outlet Type 8 x NEMA 5-20R
  • Outlets – Battery & Surge Protected 8
  • Outlets – Critical Load 4
  • Outlets – Total 8
  • Output Power Factor 1
  • Overload Protection
    • Internal Circuitry Limiting
    • Circuit Breaker Protected
  • Typical Transfer Time 6 ms Max 13 ms at normal sensitivity
  • VA 2200 VA
  • Watts 2200 W

BATTERY

  • Battery Quantity 4
  • Battery Size 12 V / 9 Ah
  • Battery Type Sealed Lead-Acid Battery
  • Hot-Swappable Yes
  • Replacement Battery Cartridge 1 x RB1290X4J
  • Runtime at Full Load 3.2 min.
  • Runtime at Half Load 11.8 min.
  • Typical Recharge Time 3 Hours (0% to 90% charged)
  • User-Replaceable Battery Yes

SURGE PROTECTION & FILTERING

  • EMI/RFI Filtration Yes
  • Surge Suppression 2430 J

MANAGEMENT & COMMUNICATIONS

  • Audible Alarms

    • Battery Mode
    • Low Battery
    • Overload
    • Overcharge
    • Fault
  • Emergency Power Off (EPO) Port
    Yes

  • HID-Compliant USB Port
    Yes

  • LCD
    Multifunction LCD

  • LED Indicators

    • Power On
    • Line Mode
    • Battery Mode
    • Fault
    • UPS Fault
  • Management Cable

    • USB Cable
    • EPO Cable
  • Serial Port

    • 1 Serial
    • 1 Dry Contact
  • SNMP / HTTP Remote Monitoring

    • Yes – RMCARD205 pre-installed
    • Yes – with built-in RJ45 ethernet connection cloud port
  • Software (Free Download) PowerPanel® Business

PHYSICAL

  • Color Black
  • Form Factor Rack/Tower
  • Material of Construction Metal
  • Rack Height 2U

CyberPower-PR1000RT2U-Smart-App-Sine-Wave-UPS-2

DIMENSIONS

Dimensions – Width/Height/Depth (cm)| 43.43 x 8.64 x 41.15 cm
Dimensions – Width/Height/Depth (mm)| 434 x 86 x 411 mm
Dimensions – Width/Height/Depth (in.)| 17.1 x 3.4 x 16.2 in
Weight (kg)| 27.12 kg
Weight (lbs.)| 59.8 lbs.
SHIPPING DIMENSIONS
Shipping Dimensions – Width/Height/Depth (cm)| 53.34 x 26.67 x 57.15 cm
Shipping Dimensions – Width/Height/Depth (mm)| 533.4 x 266.7 x 571.5 mm
Shipping Dimensions – Width/Height/Depth (in.)| 21 x 10.5 x 22.5 in
Shipping Weight (kg)| 34.06 kg
Shipping Weight (lbs.)| 75.1 lbs.
ENVIRONMENTAL
Audible noise at 1m from surface of unit| 52.5 dBA
Online Thermal Dissipation| 135 BTU/hr
Operating Elevation| 0 – 9,843 ft (0 – 3,000 m)
Operating Relative Humidity| 0 – 95 % (non-condensing)
Operating Temperature| 32 – 104 °F (0 – 40 °C)
Storage Elevation| 0 – 49,213 ft (0 – 14,999 m)
Storage Relative Humidity| 0 – 95 % (non-condensing)
Storage Temperature| 5 – 113 °F (-15 – 45 °C)
CERTIFICATIONS
Environmental| RoHS Compliant
Safety| UL1778 VCCI

FCC Class A

CSA C22.2 No 107.3

WARRANTY
CEG Amount| $400,000
Connected Equipment Guarantee| Lifetime
Extended Warranty Option| WEXT5YR-U4B
Product Warranty| 3-Year Limited

©2024 Cyber Power Systems (USA), Inc. CyberPower is a registered trademark and brand of Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners. CyberPower reserves the right to change, without notice, marketing programs, product offerings and specifications. www.cyberpowersystems.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals