nVent CADDY CCC0187 Cushion Insulated Strut Clamp for Pipe Tube Owner’s Manual
- September 16, 2024
- nVent Caddy
Table of Contents
nVent CADDY CCC0187 Cushion Insulated Strut Clamp for Pipe Tube
Product Usage Instructions
Installation Guidelines
- Ensure to refer to nVent’s product instruction sheets available at www.nvent.com or from your nVent customer service representative.
- Install the cushion clamp securely following the provided instructions.
Usage Recommendations
- Use the clamp for securing pipes or tubes with an outer diameter of 1 7/8 inches and a pipe size of 1 1/2 inches.
- Avoid exceeding the maximum load capacity specified for the clamp.
Maintenance
- Regularly inspect the clamp for any signs of wear or damage.
- Clean the clamp as needed to prevent the buildup of dirt or debris that may affect its performance.
FAQ
- Q: Can this clamp be used for outdoor applications?
- A: The clamp is suitable for both indoor and outdoor use, but proper precautions should be taken to prevent corrosion in outdoor environments.
- Q: What is the maximum load capacity of this clamp?
- A: The maximum load capacity of the clamp should not exceed the manufacturer’s specifications to ensure safe usage.
CATALOG NUMBER
- CCC0187
FEATURES
- Fits into the open side of the strut channel
- The plastic cushion is hinged to spread apart for easy installation
- Reduces noise and absorbs shock by gripping the pipe/tube firmly
- The square neck of the carriage bolt prevents over-tightening
- Nylon locknut prevents loosening under vibration
- FM® Specification Tested (from 3/8″ to 4″ of Copper Tube Size)
PRODUCT ATTRIBUTES
- Material: Steel; Polypropylene
- Finish: Zinc Chromate
- Outer Diameter (OD): 1 7/8″
- Pipe Size: 1 1/2″
- Width (W): 1.56″
- A: 2.33″
- B: 3.21″
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and
from your nVent customer service representative. Improper installation,
misuse, misapplication, or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury, and death and/or void your warranty.
CONTACT
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
nVent.com
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent