dyras TF-40 Tower Fan Instruction Manual
- September 14, 2024
- dyras
Table of Contents
dyras TF-40 Tower Fan
Product Information
Specifications:
- Power Rating: 40W
- Input Voltage: 220-240V ~50/60Hz
- Timer: 12 hours
- Display: LED
- Control: Remote control, buttons
Assembly
- Nut
- Base
- Base holder
Take all of the appliance parts out of the packaging and remove all packaging materials and inserts. Turn the fan upside down, unfasten the nut on the bottom of the body. Prepare the base which consists of two halves, before connecting two halves, make sure the power cord goes through the hole of the base. Put the connected base onto the base bracket. Then fix them with the nut. Lead the power cable on the bottom part of the base through the cable outlet groove.
Display Functions
- On/Off
- Speed
- Timer
- Oscillation
- Wind mode
Usage
Cleaning and Maintenance: Before cleaning the unit, turn off the fan and unplug the plug from the main socket first. Use a soft cloth to clean the surface of the unit and a soft bristled brush to remove dust from the air inlet and outlet grills. Never spray with liquids or submerge the Tower Fan in water or any other liquid. Dispose of used batteries properly.
Waste Management: Follow local regulations for proper disposal of electronic waste and batteries.
CE Symbol
The CE mark indicates that the product complies with European Union
standards.
FAQ
-
Q: Can I use the Tower Fan without assembling it?
A: No, proper assembly is required for safe and efficient operation of the Tower Fan. -
Q: How do I change the speed settings?
A: You can adjust the speed settings using the Speed button on the control panel or remote control.
Instruction Manual
Please read the instructions carefully before using!
GENERAL SAFE GUARDS
To reduce the risk of fire, electric shock, and/or injury when using electrical appliances, the following basic safety precautions should always be followed:
- To reduce the risk of electric shock, always unplug the unit before disassembling/assembling, cleaning, or repositioning the unit.
- Improper handling can result in injury and interference to the device! The device may only be used for its intended purpose! The manufacturer accepts no liability for damage resulting from improper use or improper handling.
- Before connecting to the mains, make sure that the current and voltage correspond to the values on the rating plate.
- Do not immerse the device in water or any other liquid. If the appliance has been dropped into the water, unplug it immediately! Risk of electric shock!
- Never try to open the cover!
- Do not use the device with wet hands, on wet ground or in a humid environment!
- Never unplug the power supply with wet or damp hands!
- Check the condition of the cable and connector regularly!
- Damaged power cords should be replaced by a service center to avoid hazards.
- The unit will not operate if the cord or plug is damaged or otherwise damaged. In such cases, consult a specialist garage.
- Never operate the appliance damaged! Risk of electric shock!
- If you use an extension cord, it must be of sufficient capacity with the rating plate, otherwise the cable and / or connector may overheat!
- This appliance is for household use only!
- Caution! The device is powered on while it is connected to the mains.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
- This appliance is intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, in children under the age of 8, unless they have been given supervision or instruction concerning use of the appliance by a qualified person. , and understand the dangers of use.
- Children should be supervised to ensure that they do not play with the appliance. Children should not be allowed to clean and service without supervision!
SPECIFICATION
| Power | 40W |
|---|---|
| Rating | 220-240V, ~50/60Hz |
| Timer | 12 hours |
| Screen | LED |
| Operating | Remote control, buttons |
ASSEMBLING THE APPLIANCE
Assembly
- Nut
- Base
- Base holder
Take all of the appliance parts out of the packaging and remove all packaging
materials and inserts.
Turn the fan upside down，unfasten the nut on bottom of body. Prepare the base
which consists of two halves, before connecting two halves,make sure the power
cord through the hole of base.Put the connected base onto base bracket. Then
fix them with the nut. Lead the power cable on the bottom part of the base
through the cable outlet groove.
Display 
- Display
- On/Off
- Speed
- Timer
- Oscillation
- Wind mode
- Speed
- Timer
- On/Off
- Oscillation
- Wind mode
USING THE APPLIANCE
Insert the plug into the electrical socket. You will hear a short “beep” sound and the display will show the current temperature and fan will switch to standby position. The unit’s functions can control by touch panel or remote control.
- ON/OFF: Press the “ON/OFF” button on the control panel or remote control to turn on the unit. The unit will start at low speed, in normal mode. To return to standby mode, simply press the ON/OFF button again.
- SPEED : The speed can be adjusted on 3 levels (1-2-3) by pressing the “SPEED” button. During operation, the display shows the selected stage.
- TIMER : Press the “TIMER” button to set the operating time of the fan from 0 to 12hours. The remaining time is indicated on display.
- MODE : Press the “MODE” button to select the natural, the sleep, or the normal operation mode. The fan speed is changed according to the built-in program and ignores the speed set by the SPEED button.
- OSC : Press the “OSC” button to activate the oscillation function on or off.
CLEANING AND MAINTENANCE
Before cleaning the unit, turn off the fan and unplug the plug from the main
socket first. Use a soft cloth to clean the surface of the unit and a soft
bristled brush to remove dust from the air inlet and outlet grills.
Never spray with liquids or submerge the Pedestal Fan in water or any other
liquid. The batteries after used should not be throwing away, it will be
reclaimed.
WASTE MANAGEMENT
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Manufacturer/Importer:
CE SYMBOL
The mark is intended to indicate that the product complies with the relevant European Union standards and can be freely marketed in the European Union.