WaveLinx OEM-SWPD3 PRO Industrial Fixture Mount Cooper Lighting Solutions Owner’s Manual
- September 14, 2024
- WaveLinx
Table of Contents
WaveLinx OEM-SWPD3 PRO Industrial Fixture Mount Cooper Lighting Solutions
Motion and Closed Loop Daylighting including Field Installed Aisle Shield
Typical Applications
Industrial • Manufacturing
Interactive Menu
- Order Information page 2
- Additional Resources page 3
- Connected Systems page 5
- Product Warranty
Product Certification
- Meets latest ASHRAE Standard 90.1 requirements
- Meets latest IECC requirements
- Meets latest CEC Title 24 requirements
Product Features
Compatibility
Overview
The industrial sensors are an integral part of the WaveLinx connected lighting system and offer passive infrared (PIR) occupancy and a photocell for closed loop daylighting. WaveLinx PRO industrial sensors offer installation heights up to 40 feet and have coverage patterns up to 5000 square feet (see sensor specifications – field of view). When part of WaveLinx PRO, the sensor operates on a wireless mesh network based on IEEE 802.15.4 standards.
The sensors offer simple tool-less integration into WaveLinx PRO industrial light fixtures equipped with the 4-pin Zhaga Book 18 compliant socket. Once installed, sensors receive power from their co-located light fixture with no batteries to replace. The sensor in combination with the WaveLinx Mobile application allows you to gain considerable energy savings from occupancy and daylight sensing lighting control. The WaveLinx Mobile application allows you to map the sensor to any area or control zone, select occupancy or vacancy, occupied and unoccupied light levels and set the hold time.
Product Features & Benefits
- Models suitable for High bay (up to 40ft / 45ft major motion) applications
- Out of the box functionality: Occupied to Full, Unoccupied to 10%, daylighting disabled
- Passive Infra-Red (PIR) motion sensor with coverage up to 5000 square feet
- Integrated photocell for closed loop daylight harvesting
- Software configurable settings with WaveLinx Mobile application
- Simple tool-less twist lock fixture connection via 4-pin Zhaga Book 18 socket
- IP66 rating for warehouse and manufacturing environments
- Energy calculations available through WaveLinx CORE
Order Information
WaveLinx PRO Industrial Fixture Mount Sensors are accessories to the WaveLinx
connected lighting (WCL) system and requires a WaveLinx Area Controller (WAC)
for full functionality.
WaveLinx PRO Industrial Fixture Mount Sensors are used to provide occupancy
and daylight dimming to spaces from the industrial light fixture. For energy
code compliance, additional sensors may not be required.
Catalog Number
Catalog # | Description |
---|---|
OEM-SWPD3-WH | WaveLinx PRO Industrial Fixture Mount Sensor, White, up to |
40ft (12.2m)
Notes| Notes
For use with industrial light fixtures equipped with the WaveLinx PRO Zhaga
compliant 4-pin socket only.| When used as a component in the WaveLinx
connected lighting system, WaveLinx PRO system design best practices
(including WaveLinx Area Controller placement, line of sight distances, number
of hops, etc.) must be followed.
High mount models accommodate mounting height to 45ft (13.7m) for major motion (vehicles, fork trucks, etc.) – may not detect minor motion of people depending on conditions.
Required Integration Components
Catalog Number
Catalog Number | Description |
---|---|
OEM-BK18-SOCKET | Zhaga compliant 4-pin book-18 socket |
OEM-OUT-IND- CM | WaveLinx PRO outdoor – Industrial 0-10V control |
module
Product Specifications
Sensor Mechanical
Size: Base Diameter 3.2” (82mm) Height: 1.6” (41mm) Weight: 0.20 lbs (0.10 kg)
-
Environment:
-
Operating temperature: -40°F to 131°F (-40°C to 55°C)
Sensor passive infrared (PIR) performance may become exceedingly sensitive below -4°F (-20°C)
Note : WaveLinx Area Controller should be installed in an indoor conditioned envirionment, preferably with line of sight through a window to one or more WaveLinx PRO wireless devices. -
Storage temperature: -40°F to 158°F (-40°C to 70°C)
-
Relative humidity operating: 0% to 95% non-condensing
-
Default behavior intended for indoor use only
-
-
Mounting: Fixture mount
-
Mounting Height: High bay up to 40ft (12m)
-
Color: White
-
Housing: UV stabilized plastic
-
Ingress protection: IP66
Light Sensor Detector Shields: Field configured shield included -
Daylighting Installation:
- Ensure that sensor is not looking directly at artificial light
- Ensure that sensor is not obstructed
- Use configurable lens mask for desired directionality
Socket Mechanical
- Socket Color: Gray
- Socket Housing: PBT
- Socket Nut Color: Black
- Socket Nut Housing: Nylon
- Socket Contacts: Copper Alloy, Sn over Ni finish
- Star Washer: Stainless Steel
- Lock Washer: (Ref P/N: 2213817-1) and Nut: (Ref P/N: 2213791-1) not assembled, shipped bulk pack
Electrical Control Module
- Input Voltage: 120-277VAC, 50/60Hz
- Input Current: 6mA @ 120VAC, 4.5mA @ 277VAC
- Output Voltage: 120-277VAC, 50/60Hz (Relay)
- Output Current: 6A MAX
- Load Types: Electronic Ballast, LED, Magnetic Ballast
- Output Control: 0-10VDC, Class 2
Software Specifications
- Any number of sensors can be mapped to any number of zones
- Mobile app configuration for Occupancy/Vacancy
- Remote Hold Time settings fully configurable via mobile app
- Mobile app configuration of Occupied and Unoccupied light levels
- Energy calculations available through WaveLinx CORE
Wireless Specifications
- Radio: 2.4GHz
- Standard: IEEE 802.15.4
- Transmitter Power: + 8dBm
- Range: Sensor to sensor; 160ft (49m) LOS (best practice)
System Performance
Maximum number of nodes supported: 150 per WaveLinx Area Controller (best
practice 100 devices)
**Standards/Ratings***
- cULus Listed – Energy Management Equipment (UL916)
- FCC Part 15/ECES-003
- Meets latest ASHRAE Standard 90.1 requirements
- Meets latest IECC requirements
- Meets latest CEC Title 24 requirements
- Socket must comply with Directive 2002 / 95 / EC (ROHS)
Warranty
Five year warranty standard
Dimensional Details
Mounting Height
Installation
The SWPD3 easily installs into WaveLinx PRO-ready LED fixtures equipped with
Zhaga Book 18 4-pin sockets.
Sensor connection is enabled via the simply twist-lock connection and provides
immediate out-of-the-box functionality.
For wiring/installation details
Field of View
Note : False motion detection can occur when objects of contrasting
temperature with the surrounding environment move within the sensor field of
view. Wind blowing leaves, branches, or other objects can trigger the motion
sensor. It is recommended that the sensor be mounted away from these objects.
Note : Air movement at temperature contrasting with the environment may
cause false motion detection. For that reason, it is recommended that the
sensor be mounted 3-4ft away from air vents, when possible.
System Diagram
This diagram shows the main components of the WaveLinx connected lighting
system with CAT and PRO devices.
The PRO devices communicate using wireless mesh technology based on the IEEE
802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller
(WAC) is required for power and data access to the building lighting network.
The CAT devices communicate over the category 5 based communication bus and
control the light fixtures using a relay (on/off) and 0-10V output
(dim/raise).
WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the
Ethernet network.
Control Systems WaveLinx
Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
© 2024 Cooper Lighting Solutions
All Rights Reserved.
Specifications and dimensions subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>