WaveLinx OEM-WIK-WH LITE Industrial Fixture Mount High Bay Low Bay Sensor Owner’s Manual

June 15, 2024
WaveLinx

Project| | Catalog #| Type|
---|---|---|---|---
Prepared by| | Notes| Date|

WaveLinx
LITE Industrial Fixture Mount
High Bay / Low Bay Sensor

Motion and closed loop daylighting including field installed shield
Typical Applications
Industrial • Manufacturing

Interactive Menu

  • Order Information page 2
  • Additional Resources page 3
  • Connected Systems page 7
  • Product Warranty

Product Certification*

Product Features

  • Meets latest ASHRAE Standard 90.1 requirements
  • Meets latest IECC requirements
  • Meets latest CEC Title 24 requirements
  • NEMA WD-7 and NEMA 4 compliant

Compatibility

Overview

The industrial sensors are an integral part of the WaveLinx LITE System and offer passive infrared (PIR) occupancy and a photocell for closed loop daylighting. WaveLinx LITE industrial sensors offer installation heights up to 40 feet and have coverage patterns up to 5000 square feet (see sensor specifications – field of view). When part of the WaveLinx LITE system, the sensor operates on a wireless mesh network based on IEEE 802.15.1 (Bluetooth® 4.2 Low Energy) standards.
The sensors offer simple tool-less integration into WaveLinx industrial light fixtures equipped with the 4-pin Zhaga Book 18 compliant socket. Once installed, sensors receive power from their co-located light fixture with no batteries to replace.
The sensor in combination with the WaveLinx LITE mobile application allows you to gain considerable energy savings from occupancy and daylight sensing lighting control. The WaveLinx LITE mobile application allows you to map the sensor to any area or control zone, select occupancy or vacancy, occupied and unoccupied light levels and set the hold time.

Product Features & Benefits

  • Models suitable for High bay (up to 40ft / 45ft major motion) and Low bay (up to 15ft) applications
  •  Out of the box functionality: Occupied to Full, Unoccupied to 10%, daylighting disabled
  • Passive Infra-Red (PIR) motion sensor with coverage up to 5000 square feet
  • Integrated photocell for closed loop daylight harvesting
  • Software configurable settings in networks of 40 devices with WaveLinx LITE mobile application
  • Simple tool-less twist lock fixture connection via 4-pin Zhaga Book 18 socket
  • IP66 rating for warehouse and manufacturing environments
  • WaveLinx LITE is DLC Listed for interior applications – meeting the NLC5 Technical Requirements

Order Information
WaveLinx LITE Industrial Fixture Mount High Bay / Low Bay Sensors are accessories to the WaveLinx LITE (WLC) system which may be used with out-of- the-box functionality or commissioned via the WaveLinx LITE mobile application.
WaveLinx LITE Industrial Fixture Mount High Bay / Low Bay Sensors are used to provide occupancy and daylight dimming to spaces from the industrial light fixture. For energy code compliance, additional sensors may not be required.
WaveLinx LITE devices are not currently compatible with the WaveLinx Pro Wireless Area Controller.

Catalog Number

Catalog # Ii. scri,tion
OEM-WIK-WH WaveLinx LITE Industrial Fixture Mount Low Bay Sensor, White, 7 –

15ft (2.1 – 4.5m)
OEM-WIM-WH| WaveLinx LITE Industrial Fixture Mount High Bay Sensor, White, 15 – 40f1 (4.5 – 12.2m)
Notes
For use with industrial light fixtures equipped with the WaveLinx Zhaga compliant 4-pin socket only.| Notes
When used as a component in the WaveLinx LITE system, design best practices (including the number of devices, installation locations, device to device spacing, etc. must strictly adhered. High mount models accommodate mounting height to 45ft (13.7m) for major motion (vehicles, fork trucks, etc.) – may not detect minor motion of people depending on conditions.

Optional Accessories
If the out-of-the-box behavior of the WaveLinx LITE Industrial Sensor does not satisfy project requirements, download and register the WaveLinx LITE mobile application from either the Google Play or Apple Store® .
This mobile application can be used to form a lighting network – creating control zones, occupancy sets, setting occupancy or vacancy modes of operation, configuring daylighting, etc.
Required Integration Components

Catalog Number

Catalog Number Description
OEM-BK18-SOCKET Zhaga compliant 4-pin book-18 socket
OEM-OUT-IND-CM WaveLinx Outdoor – Industrial 0-10V control module

Product Specifications

Key Features

  • Models suitable for High bay (up to 40ft / 45ft major motion) and Low bay (up to 15ft) applications
  • Out of the box functionality:Occupied to Full, Unoccupied to 10%, daylighting disabled
  • Passive Infra-Red (PIR) motion sensor with coverage up to 5000 square feet
  • Integrated photocell for closed loop daylight harvesting
  • Software configurable settings with WaveLinx LITE mobile application
  • Simple tool-less twist lock fixture connection via 4-pin Zhaga Book 18 socket
  • IP66 rating for warehouse and manufacturing environments
  • Control modules suitable for 120-277VAC with 6 amp zero cross relay and 0-10V continuous dimming

Sensor Mechanical
Size: Base Diameter 3.2” (82mm) Height: 1.6” (41mm)
Weight: 0.20 lbs (0.10 kg)
Environment:

  • Operating temperature: -40°F to 131°F (-40°C to 55°C)
    Note: Sensor passive infrared (PIR) performance may become exceedingly sensitive below -4°F (-20°C)

  • Storage temperature: -40°F to 158°F (-40°C to 70°C)

  • Relative humidity operating: 0% to 95% non-condensing

  • For indoor use only
    Mounting: Fixture mount
    Mounting Height: High bay up to 40ft (12m)
    Color: White
    Housing: UV stabilized plastic
    Ingress protection: IP66
    Light Sensor Detector Shields: Field configured shield included
    Daylighting Installation:

  • Ensure that sensor is not looking directly at artificial light

  • Ensure that sensor is not obstructed

  • Use configurable lens mask for desired directionality
    Socket Mechanical
    Socket Color: Gray
    Socket Housing: PBT
    Socket Nut Color: Black
    Socket Nut Housing: Nylon
    Socket Contacts: Copper Alloy, Sn over Ni finish
    Star Washer: Stainless Steel
    Lock Washer: (Ref P/N: 2213817-1) and Nut: (Ref P/N: 2213791-1) not assembled, shipped bulk pack
    Electrical Control Module
    Input Voltage: 120-277VAC, 50/60Hz
    Input Current: 6mA @ 120VAC, 4.5mA @ 277VAC
    Output Voltage: 120-277VAC, 50/60Hz (Relay)
    Output Current: 6A MAX
    Load Types: Electronic Ballast, LED, Magnetic Ballast
    Output Control: 0-10VDC, Class 2
    Software Specifications

  • Mobile app configuration for Occupancy/Vacancy

  • Remote Hold Time settings fully configurable via mobile app

  • Mobile app configuration of Occupied and Unoccupied light levels
    Wireless Specifications
    Radio: 2.4GHz
    Standard: IEEE 802.15.1 – Bluetooth®
    4.2 Low Energy (BLE)
    Transmitter Power: +14dBm
    Range: Device to device; 100ft (30m) LOS (best practice)
    System Performance
    Maximum number of nodes supported: Up to 50 devices per commissioned network (best practice 40 devices)
    Standards/Ratings*

  • cULus Listed – Energy Management Equipment (UL916)

  • FCC Part 15/ECES-003

  •  Meets latest ASHRAE Standard 90.1 requirements

  • Meets latest IECC requirements

  •  Meets latest CEC Title 24 requirements

  •  Socket must comply with Directive 2002 / 95 / EC (ROHS)

  •  WaveLinx LITE is DLC Listed for interior applications – meeting the
    NLC5 Technical Requirements
    Warranty
    Five year warranty standard

Download the WaveLinx LITE mobile application from either the Google Play or Apple Store®

Installation

The WIK / WIM easily installs into WaveLinx-ready LED fixtures equipped with Zhaga Book 18 4-pin sockets. Sensor connection is enabled via the simply twist-lock connection and provides immediate out-of-the-box functionality.

https://uqr.to/idqk

Field of View – Low Mount

Field of View – High Mount

Note: False motion detection can occur when objects of contrasting temperature with the surrounding environment move within the sensor field of view.
Wind blowing leaves, branches, or other objects can trigger the motion sensor. It is recommended that the sensor be mounted away from these objects.
Note: Air movement at temperature contrasting with the environment may cause false motion detection. For that reason, it is recommended that the sensor be mounted 3-4ft away from air vents, when possible.

System Diagram:

This diagram shows the the main components and topology of the WaveLinx system with LITE devices. The WaveLinx LITE devices use standardized IEEE 802.15.1 (Bluetooth® 4.2 Low Energy) mesh technology for device to device communications without the requirement of a gateway. The WaveLinx LITE enabled luminaires provide out-of-the-box functionality for independent operation when energized. With the use of the WaveLinx LITE mobile application with MyApps secure cloud portal access, groups of independent luminaires may be created and maintained with areas, control zones, and occupancy sets. WaveLinx LITE devices are not currently compatible with the WaveLinx Area Controller.

Control Systems
• WaveLinx

Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
© 2023 Cooper Lighting Solutions
All Rights Reserved.
Specifications and dimensions subject to change without notice.
PS503304EN
July 2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals