LOREX F462AQ Series 2K WiFi Camera User Manual
- June 3, 2024
- Lorex
Table of Contents
LOREX F462AQ Series 2K WiFi Camera
Package Contents
- 2K Wi-Fi Camera (x1)
- Mounting Template (x1)
- Mounting Bracket (x1)
- Anchors (x4)
- Screws (x4)
- Ethernet Cap Cover (x1)
- Power Adapter (x1)
- 32GB MicroSD card (x1)
- Drill
Overview
- Ethernet Port
- Power Port
- Wi-Fi Antennas
- Pairing/Reset Button
- MicroSD card slot
- Status Indicator
- Warning Light
- Infrared Light
- Rear Speaker
- Lens
- Microphone
Status Indicator
| Flashing | Ready for network connection. |
|---|---|
| Solid | Operating correctly. |
| Flashing | Network connection failed.* |
Solid| Device malfunction.*
Flashing| A firmware update is in progress.
Try resetting the device by holding down the reset button
Setup
- Download Lorex Home app
- Tap + in the app to add the device
- Plug in the power adapter and connect it to the device.
- Follow the in-app instructions to complete setup
Need help?
For up-to-date information and resources visit
- Download product guides
- Find related troubleshooting tips & FAQs
- Watch how-to-videos
FCC
Register your product
Please see our full Terms of Service and Limited Hardware Warranty Policy at
As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>