HYUNDAI HY-T02 Pro True Wireless Earphones User Manual

HYUNDAI HY-T02 Pro True Wireless Earphones

Please read all instructions carefully and retain for future use

Usage Instruction

1. Don’t attempt to disassemble the unit and change any part, except there is an operation method mentioned in the manual.
2. Don’t expose the unit to liquid, moisture or humidity, since it is not a waterproof product.
3. Disconnect the unit with your BT device and move it to the safe area if the liquid get inside the unit.
4. Don’t assemble or disassemble the unit to avoid electric shock,if there is water on your hands.
5. Don’t expose the unit to extremely high temperatures or dispose of the unit in fire as it will result in an explosion.
6. Don’t place the unit in an electromagnetic interference environment to avoid malfunction.

Packing list

Product schematic description

Specifications

Product specification

• Bluetooth version: V5.4
• Transmission distance: 10M
• Battery capacity: 30mAh
• Usage time: approximately4 hours (headphones)
• Charging time: approximately 1.5 hour (for headphones)
• Rated input: 5V–35mA

Charging case specification

• Battery capacity: 230mAh
• Charging time: approximately 1.5 hours
• Rated input: 5V-300mA

(All technical information is subject to actual performance)

• Charge the Charging case
  • Connect the Type-C cable to the 5V power adaptor, and anotherend to the charging port of the Charging case.

( Kind reminder: When the white indicator light of the charging compartment flashes.please charge the charging compartment in a timely manner.)

LED Indicator Status

• Charging compartment indicator light
  • Charging the charging compartment (not fully charged): Ice blue light flashes
  • Charging case fully charged: Ice blue light on continuously
  • Discharge display: 7-color light cycle breathing
  • Low battery display: Ice blue light flashes 3 times each time
• Earphone indicator light
  • Power on: Red light flashing rapidly
  • Shutdown: Red light flashes three times
  • Left and right headphone pairing: slow flashing red light
  • Pairing successful: light off

Product operating instructions

1. Power on
   • Method 1: Remove from the charging compartment, the headset automatically turns on.
   • Method 2: Long touch the MF button of the headphones for 3s to turn on the headphones.
2. Power off
   • Method 1: Put the headphones into the charging case directly and close the case to turn off.
   • Method 2: Long touch the MF button of the headphones for 5s to turn off the headphones.
3. Pairing to the BT device
   • Step 1: Open the upper cover of the charging compartment to remove the headphones, binaural automatic pairing;
   • Step 2: open the BT list of smart devices, search ” HY-To2 Pro” and Connect (single ear use is supported).

Touch control button operating

Music playing mode

• Left/Right headphone operating

Hands free function

• Left/ Right headphone operating (incoming call)

Voice Assistant

• Left/Right Earphone Operation

Restore factory settings

• After turning on the phone without pairing state, click the headset function key 5 times to clear the pairing information and then turn off the phone.

Name and content of hazardous

Name and content of hazardous substances in products

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

More Information

• Authorized by: Modern Integrated Commercial Holdings Co., Ltd
• Authorized party: Shenzhen Modern Digital Electronics Co., Ltd
• Address: 601A, Chentian R&D Building, No. 50 Baotian Road, Xixiang Street, Bao’an District, Shenzhen
• Manufacturer: Modern Innovation (Shenzhen) Technology Development Co., Ltd
• Address: 1909, Block A, Rongchuang Zhihui Building, Intersection of Longsheng Road and Jinglong Jianshe Road, Shangfen Community, Minzhi Street, Longhua District, Shenzhen

FCC STATEMENT

According to Part 15 of the FCC Rules, this device has been tested to meet the restrictions for Class B digital devices. These restraining decrees In providing reasonable protection against harmful disturbances in residential facilities. The device generates and uses radiofrequency energy,lf this instruction is not installed and used in accordance with the regulations, it may cause harmful interference to radio communications. However, there are There is no guarantee that interference will not occur in a particular installation. If this device has built for radio or television reception Into harmful interference, the device can be determined by turning it off and on when the user is encouraged to try to pass through one or Several more measures below:

• Redirect or reposition the receiving antenna.
• Increase the distance between device and receiver.
• Sockets connected to devices on circuits different from the receiver are connected.
• Please consult a dealer or experienced radio/TV technician for assistance.

This device complies with Part 15 of the FCC Rules. The operation is restricted by the following two conditions

1. The device shall not cause harmful interference.
2. The device must accept any received interference, including interference that may cause unexpected operation.

Changes or modifications that are not explicitly approved by the compliance responsible party may invalidate the user’s permission to operate the device.
This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>