QCY BH24H3C Wireless Noise Cancelling Headset User Manual
- September 12, 2024
- QCY
Table of Contents
QCY BH24H3C Wireless Noise Cancelling Headset
Specifications
- Brand: QCY
- Model: H3 Lite
- Port: Type-C
- ANC: Yes
- Audio Port: 3.5mm AUX
- LED Indicator: Yes
- Bluetooth Version: 4.2
- Input: 5V 1A USB
Overview
The QCY H3 Lite is a wireless noise-canceling headset with adjustable slider, Type-C port, volume control, and multifunction button (MFB). It also features an ANC button, 3.5mm AUX audio port, and LED indicator.
Packaging List
Above pictures are for reference only yet practical product may vary.
How to Connect
To connect the headset, power it on and it will automatically enter pairing mode. On your phone, search for “QCY H3 Lite” and tap to connect. The headset will reconnect to the last device in its memory. To reset the headset to factory settings, press and hold both volume + and – buttons for 10 seconds until the LED blinks red 5 times.
Power on the headset and it will auto-turn connectable. On phone, search QCY H3 Lite and tap to connect.(It will auto-reconnect to the last device in the connectivity record, if any. If you need to make it turn connectable again, power it o and press and hold MFB for 4s.)
Multi-Point Connection
To use multi-point connection, connect the headset to Device A, turn off Bluetooth on Device A, and the headset will enter pairing mode (LED blinks red and blue). On Device B, search for QCY H3 Lite and connect. Then, turn on Bluetooth on Device A to reconnect it to the headset.
Factory Setting
Power on headset, press and hold both volume + and – for 10s or until LED blinks red 5 times to reset it factory. It will then auto-turn connectable.
LED
- Connected: LED blinks white every 10s
- Charging: LED glows solid red
- Top-up: LED glows solid white
Functions
- Power-on: Hold MFB for 2 seconds
- Power-off: Hold MFB for 4 seconds
- Answer/end call: Press MFB
- Skip track backward: Hold Volume- for 1 second
- Skip track forward: Hold Volume+ for 1 second
- Volume up: Press Volume+
- Volume down: Press Volume-
- Voice assistant: Double press MFB
- Playback/pause: Press MFB
- Gaming mode: Triple press MFB
- Switch mode: Press ANC Button to switch among ANC ON, ANC OFF, and Transparency
Warranty
Your QCY product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. Retain your purchase receipt. In case of defects within the warranty period, bring the warranty card and receipt to an authorized dealer for complimentary replacement services.
The manufacturer’s warranty is void under the following circumstances but not limited to:
- Improper or inadequate maintenance or modification.
- Accident, misuse, abuse, contamination, or other external causes.
- The use of unspecified adapter and accessories.
- Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
- Damages that occur as a result of one’s failure to follow the instructions.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCCID:RDR-BH24H3C
Notice:
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling.
Safety Precautions
- Please carefully read and retain this user manual before using the product.
- If the product is not used for an extended period (more than 2 weeks), please recharge it.
- You must choose a charger produced by a legitimate manufac-turer and certified by the national safety authority.
- If your phone cannot detect the Bluetooth earbuds, either re-enter pairing mode or perform a factory reset on the Bluetooth earbuds. If there is a phone program error, close and reopen Bluetooth on the phone or restart the phone.
- Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
- Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
- Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
- Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
- Do not the product indicator light near the eyes of children or animals.
- Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
- Do not use oil or other volatile liquids to clean the product.
- please do not use this device for long periods of time and at high volume, as there is a risk of hearing damage。
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City Guangdong Province
China
FAQ
-
Q: How do I reset the headset to factory settings?
A: Power on the headset, press and hold both volume + and – buttons for 10 seconds until the LED blinks red 5 times. -
Q: How do I use multi-point connection?
A: Connect the headset to Device A, turn off Bluetooth on Device A, and connect the headset to Device B by searching for QCY H3 Lite on Device B. -
Q: What is the warranty coverage?
A: The product is covered by a one-year limited manufacturer warranty from the date of delivery. -
Q: Does the headset support Wi-Fi connectivity?
A: No, the headset only supports Bluetooth connectivity.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>