fiodio AF11F 29 Inch LED Gaming Monitor User Manual

fiodio AF11F 29 Inch LED Gaming Monitor

Notices

• Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.
• Make sure the monitor is placed on a at surface. lf the monitor falls down, it may cause human injury or device damage.
• Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.
• Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
• The range of the supply voltage of the monitor is printed on the label on the rear casing. If it is impossible to determine the supply voltage, please consult the distributor or local power company.
• lf the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
• Please use a reliable earthing socket, do not overload the socket, or it may cause fire or electric shock.
• Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
• Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.
• Do not pull or twist the power cable forcedly.
• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or the product may be damaged and the warranty will be invalid.

Product introduction

Packing list

• Please check that the package of the monitor contains all parts.

• The color and shape of parts may vary with models. Figures in this User Manual are for reference only.

• Wires supplied may vary with purchased products. Figures in this User Manual are for reference only.

  • Display screen

  • Stand

  • Base

  • shaft assembly

  • DP cable

  • (PM4x10mm) Screws

  • (PM4x12mm) Screws

  • Power Cable

  • Power Adapter

  • User Manual

• Note: The redundant screws are used as spare screws.

Instructions for use

Description of buttons

1. Power button: Turn on/of the monitor.
2. Exit/Left button: Exit or return and shortcut keys.
3. Down button: Move down in the menu/game crosshair.
4. Menu button: Enter sub-menus.
5. Up button: Move up in the menu/pattern of situations.

Explanation of indicators

Indicator light:
Steady blue light indicates the power is on and the monitor runs normally. Red light indicates no horizontal or vertical synchronous signal detected or no video input signal, and that the monitor is in standby status. Please make sure your computer is turned on and operates normally and check that all video cables are fully plugged in and/or connected to the monitor.

Adjusting the monitor

Tilting angle
-5.0°(±2.0°)- +20°(±2.0°)

Installation of base

1. Open the carton package, take out the foam and put it flat on the table top. Keep the foam underneath the monitor before attaching the stand.

2. Take out the support and rotating shaft assembly and lock it with two screws.

3. Lock the bracket and base with a screw.

4. Put the assembled base into the corresponding slot of the back shell, gently press the bracket to lock it into the lock, then hold the middle of the bracket, gently lift the body twice, do not loosen, make sure it can be locked.

5. After assembly, simply hold the stand with hand to stand the monitor upright.

Note: During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid damage to the screen.

Installation of mount

1. Open the carton package, take out the foam and put it flat on the table top. Keep the foam underneath the monitor before attaching the stand.

2. Take out the wall mount assembly and lock the wall mount assembly with two screws.

3. Note: Hang the assembled product on a hard wall. Do not pinch the screen with your hands during the hanging process to avoid damaging the screen.

Note: In order to prevent the monitor from falling when it is used on the wall, please install it properly and do safety protection. Do not place or hang any objects on the wall bracket, and the wall height should be within 2 meters.

Cable connection

• The bottom interface configuration at the back of the monitor varies with products.
• Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.

HDMI interface

• Use the HDMI cable to connect the HDMI IN interface of the product to the HDMI OUT interface of a PC.

• Use the HDMI-DVI cable to connect the HDMI IN interface of the product to the DVI OUT interface of a PC.

DP interface

• Use the DP cable to connect the DP IN interface of the product to the DP OUT interface of a PC.

AUDIO OUT

• Connect audio outputting devices such as earphones to the AUDIO OUT interface.

DC interface

• Please connect the power adapter to the power cable, connect the power adapter plug to the corresponding power port of the monitor, and then connect the power cable to a properly grounded power outlet.

OSD menu

Menu description

• The color and shape of the OSD menu of the actual computer may be slightly different from them shown in the figure.
• Specifications of the OSD menu may change with improvements of functions without prior notice

Press the menu button on the control panel to access the monitor menu. The detailed information of each menu can be found in the following sections.

1. Rocker key (Right) to enter the OSD main menu or enter sub-menus.

2. Rocker key (Up) to pattern of situations or move up in the menu.

3. Rocker key (Down) to enter the GamePlus or move down in the menu.

4. Rocker key (Left) to enter the Input Signal or exit the current screen.

• Functions of the monitor vary with models, and the functions in this manual are for reference only.
  Game Settings| Standard Mode| Off/On
  ---|---|---
  RTS/RPG Mode| Off/On
  FPS Arena Mode| Off/On
  MOBA Arena Mode| Off/On
  Adaptive-Sync| Off/On
  Shadow Balance| 0-100
  Response Time| Off/Normal/Fast/Ultrafast
  Refresh Rate| Off
  On: Top Right / Top Left / Bottom Right / Bottom Left
  Game Crosshair| Off/Crosshair 1/Crosshair 2/Crosshair 3/ Crosshair 4/Crosshair 5/Crosshair 6
  Game Time| Off/15:00/30:00/45:00/60:00
  Position: Top Right/Top Left/Bottom Right /Bottom Left
  Dynamic Brightness| Off/Normal/Expert/Elaboration
  MPRT| Off/On
  Ambient Lighting| Off/On
  Picture Settings| Brightness| 0-100
  Contrast| 0-100
  DCR| Off/On
  Contextual Model| Off/Movie Mode/Reading Mode/Night Mode /Care Eyes Mode
  Low Blue Light| 0-100
  Sharpness| 0-100
  Gamma| 1.8/2.0/2.2/2.4/2.6/ S.curve
  Aspect Ratio| Wide Screen/4:3/1:1/Auto
  Color Settings| Warm| Off/On
  Natural| Off/On
  Cool| Off/On
  User1| Off/On: Red, Green, Blue
  User2| Off/On: Red, Green, Blue
  User3| Off/On: Red, Green, Blue
  Hue| Red/Green/Blue/Cyan/Magenta/Yellow: 0-100
  Saturation
• Functions of the monitor vary with models, and the functions in this manual are for reference only.
  PIP/PBP| PIP/PBP Mode| Off/PIP Mode/PBP 2Win 1:1
  ---|---|---
  Sub-Signal Source| DP/HDMI1/HDMI2
  Audio Source| Auto/DP/HDMI1/HDMI2
  PIP Position| Top Right/Top Left/Bottom Right/Bottom Left
  PIP Size| Small/Medium/Large
  Window Swap| __
  OSD Settings| Language| 简体中文/English/한국어/عربى/Portugues do Brasilazil Deutsch/Nederland/Suomi/Français/ Ελληνικά/Indonesia/Italiano/ 日 本 語 /Malaysia/ Polskie/Português/PyccK11/Español/ไทย/ YKpa’iHcbKa/Tiếng Việt/繁體中文/Türkçe
  OSD Time Out| 0-100
  OSD H-Position| 0-100
  OSD V-Position| 0-100
  OSD Transparency| 0-100
  Hotkey1 Setting| Brightness/Contrast/Volume/Mute /Shadow Balance/Game Crosshair /Refresh Rate/Game Time/Contextual Model/ PIP/PBP Mode/Input Signal/ Dynamic Brightness
  Hotkey2 Setting
  Hotkey3 Setting
  OSD Lock| Off /On
  Other Settings| Input Signal| Auto/DP/HDMI1/HDMI2
  Volume| 0-100
  Mute| Off/On
  Auto Power| Off/On
  Eye shield Remind| Off/On
  Reset| Yes/No
  Information| Input Source:/Resolution:/Mode:/SN:

Basic parameters

The standard voltage and current may vary with countries, please refer to the label at the back of the product.

Product Dimensions Normal base| Without base| 701.10 × 317.63 × 121.71 mm
With base| 701.10 × 399.49 × 196.86mm
Net Weight| approx. 5.22 kg
Gross Weight| approx.7.3 kg
Tilting angle| Forward titling: -5°±2° ; Backward tilting : 20°±2°
Rotation angle| NA
Height angle| NA
Pivot angle| NA
Environmental conditions| Action| Temperature: 0°C~ 40°C (32°F ~ 104°F)
Humidity: 10%~90% RH (non-condensing)
Storage| Temperature: -20°~ 60° (-4°F ~ 140°F)
Humidity: 5%~95% RH (non-condensing)

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or  registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received,
3. including interference that may cause undesired operation.
   CAN ICES-3 (B)/NMB-3(B)

Customer Support

fiodio@cesz.com

Made in China

Documents / Resources

| fiodio AF11F 29 Inch LED Gaming Monitor [pdf] User Manual
AF11F 29 Inch LED Gaming Monitor, AF11F, 29 Inch LED Gaming Monitor, LED Gaming Monitor, Gaming Monitor, Monitor
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>