MMD MXH Series Components Oscillator User Guide
- June 17, 2024
- MMD
Table of Contents
**MMD MXH Series Components Oscillator User Guide
**
- Low Profile SMD Package
- Hermetically Sealed
- Wide Frequency Range
- Custom Options Available
Electrical Specifications
| Frequency Range | 1.544MHZ to 66.666MHZ |
|---|---|
| Temperature Stability* | (See Part Number Guide for Options) |
| Operating Temperature Range | (See Part Number Guide for Options) |
| Storage Temperature Range | -40°C to +85°C |
| Aging (+25°C ±3°C) | ±5ppm for first year |
| Supply Voltage ±10% (Vdd) | +1.80 VDC |
| **** Supply Current | 1.544MHZ to 9.999MHZ |
10mA max
10.000MHZ to 34.999MHZ| 7mA max| 8mA max| 10mA max| 20mA max
35.000MHZ to 49.999MHZ| 15mA max| 20mA max| 25mA max| 50mA max
50.000MHZ to 66.000MHZ| 25mA max| 30mA max| 35mA max| 60mA max
Waveform| HCMOS
Logic “0”| 10% Vdd max
Logic “1”| 90% Vdd min
Rise/Fall Time (10% to 90% of Supply Voltage)| 4nSec
Load| 15pF
Symmetry (50% of waveform)| (See Part Number Guide for Options)
Start-up Time| 10mSec max
Absolute Clock Period Jitter| 1pSec
Tri-State Operation| Voh = 70% of Vdd min to Enable OutputVol = 30% max or
grounded to Disable Output (High Impedance)
Standby Current (only with “S” Option)| <7 Micro Amps
- Inclusive of Temperature., Load and Voltage
Environmental & Mechanical Detail
| Shock | MIL-STD-883, Method 2002, Cond B |
|---|---|
| Solderability | MIL-STD-883, Method 2003 |
| Solvent Resistance | MIL-STD-202, Method 215 |
| Vibration | MIL-STD-883, Meth 2007, Cond A |
| Gross Leak Test | MIL-STD-883, Meth 1014, Cond C |
| Fine Leak Test | MIL-STD-883, Meth 1014, Cond A2 |
| MSL | Level 1 per IPC/JEDEC J-STD 20 |
Part Number Guide
Please Consult with MMD Sales Department for any other Parameters or Options.
Mechanical Details
Pin Connections
Pin 1| Tri-State / Standby
Pin 2| Case Ground
Pin 3| Output
Pin 4| Supply Voltage
Tape & Reel Dimensions
| PITCH | 4.00 [0.157] |
|---|---|
| TAPE WIDTH | 8.00 [0.315] |
| REEL DIA | 180 [7.0] |
| COUNT | 1000 |
| PIN 1 ORIENT | Q1 |
Notes: UNLESS OTHERWISE SPECIFIED.
- Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8mm through 200mm Embossed Carrier Tapping and 8mm and 12mm Punched Carrier Tapping of Surface Mount Components for Automatic Handling.
- Dimensions are in millimetres [inch].
- Tolerances are ±0.1 [0.004] mm unless otherwise specified.
- Do not scale drawing.
Revised J: 01/06/2023
www.mmdcomp.com
Downloaded from Arrow.com.
