YEELIGHT YLDDL-0084 Spotlight User Manual

: June 13, 2024
: Yeelight

Table of Contents

Product Description
Mounting Instructions
Specifications
Precautions
Warranty Conditions
EU Declaration of Conformity
Documents / Resources

Spotlight
User Manual

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Product Description

YEELIGHT YLDDL 0084 Spotlight - Product Description

Mounting Instructions

Take out the spotlight from the package and remove the base in the opposite direction according to the installation instructions of the base. In order to avoid any danger, please ask an electrical professional to perform mounting or maintenance.
(Caution, risk of electric shock)
Before mounting, make sure to disconnect the power supply to prevent electric shock. Mounting should be performed in strict accordance with the instructions. Improper mounting is liable to cause accidents such as fall, fire and electric shock.
Use an impact drill 6 mm in diameter to make two mounting holes with a length of ≥ 25mm in the wall (as shown in the following figure). Put the expansion tube into the mounting hole, and then thread the power cord though the wiring hole. Use self-tapping screws to fix the base on the ceiling, and verify the base is secure mounted.
The wiring hole is suitable for power leads with a cross-sectional area of 1.5-2.5 mm². Strip the power cord by 11-13mm, and connect the neutral, live and ground wires to the ceiling light. A solid or stranded hard wire is used as the power lead. This product must be grounded.
Connect the neutral, and live wires to the wiring holes marked with N, and L in turn. (Open the internal junction box at the back of the spotlight, connect the wires and tighten the screws with an electrician’s screwdriver.)
Holed both sides of the lamp with both hands, align the lamp with the fixed base, then push the spotlight to the left or right at the same time (depending on the orientation of the base). When you hear a “click”, the installation is complete. Aways check for proper mounting after you have finished. Improper mounting may cause the product to fall.
Align the bulb with the GU10 interface in the spotlight tube, and then rotate it clockwise to complete the installation. After completing the installation, please make sure that the spotlight base is securely installed.

Specifications

Model:	YLDDL-0083, YLDDL-0083-B
Lamp Holder:	GU10
Rated Input:	220-240V~50/60Hz
Rated Power:	4.5W each lamp holder
Maximum wattage placement bulb:	50W
Model:	YLDDL-0084, YLDDL-0084-B
Lamp Holder:	GU10
Rated Input:	220-240V~50/60Hz 50mA
Rated Power:	4.5W each lamp holder
Maximum wattage placement bulb:	50W
Model:	YLDDL-0085, YLDDL-0085-B
Lamp Holder:	GU10
Rated Input:	220-240V~50/60Hz
Rated Power:	4.5W each lamp holder
Maximum wattage placement bulb:	50W

Precautions

Do not replace the light source of the ceiling light by yourself. The light source should only be replaced by the manufacturer, after-sales service, or a qualified electrician.
The light installation requires a qualified electrician, and the wiring must comply with IEEE electrical standards or national standards.
Make sure the voltage is consistent with the ceiling light’s operating voltage before use. Using the mismatched voltage may damage the ceiling light and cause safety hazards.
The ceiling light generates heat during working. Please keep it is well ventilated for heat dissipation.
The ceiling light should be installed in a stable location to prevent it from dropping down or falling off.
Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm.
For indoor use only.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

**** We Qingdao Yeelink Information Technology Co., Ltd., Hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments.

WEEE
**** This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53,
Holešovice, 170 00 Prague 7
www.alza.cz